2SK3702JS Ordering number : ENA0632 SANYO Semiconductors DATA SHEET N-Channel Silicon MOSFET 2SK3702JS General-Purpose Switching Device Applications Features * * * * * Low ON-resistance. Ultrahigh-speed switching. 4V drive. Avalanche resistance guarantee. Pb-free type. Specifications Absolute Maximum Ratings at Ta=25C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage VDSS 60 Gate-to-Source Voltage VGSS 20 V ID 18 A Drain Current (DC) Drain Current (Pulse) IDP PW10s, duty cycle1% V 72 A 2.0 W Allowable Power Dissipation PD 20 W Channel Temperature Tch 150 C Storage Temperature Tstg --55 to +150 C Avalanche Energy (Single Pulse) *1 EAS 23 mJ Avalanche Current *2 IAV 18 A Tc=25C Note : *1 VDD=20V, L=100H, IAV=18A *2 L100H, Single pulse Electrical Characteristics at Ta=25C Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Marking : K3702 Symbol V(BR)DSS IDSS IGSS Conditions ID=1mA, VGS=0V VDS=60V, VGS=0V VGS(off) yfs VGS= 16V, VDS=0V VDS=10V, ID=1mA VDS=10V, ID=9A RDS(on)1 RDS(on)2 ID=9A, VGS=10V ID=9A, VGS=4V Ratings min typ Unit max 60 V 1 10 1.2 8 2.6 12 A A V S 42 55 m 60 85 m Continued on next page. Any and all SANYO Semiconductor products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO Semiconductor representative nearest you before using any SANYO Semiconductor products described or contained herein in such applications. SANYO Semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor products described or contained herein. TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D1306QA TI IM TC-00000378 No. A0632-1/5 2SK3702JS Continued from preceding page. Parameter Symbol Ratings Conditions min typ max Unit Input Capacitance Ciss pF Coss VDS=20V, f=1MHz VDS=20V, f=1MHz 775 Output Capacitance 125 pF Reverse Transfer Capacitance Crss VDS=20V, f=1MHz 105 pF Turn-ON Delay Time td(on) See specified Test Circuit. 11 ns Rise Time tr td(off) See specified Test Circuit. 65 ns See specified Test Circuit. 75 ns tf Qg See specified Test Circuit. 70 ns VDS=30V, VGS=10V, ID=18A 19 nC Gate-to-Source Charge Qgs nC Qgd VDS=30V, VGS=10V, ID=18A VDS=30V, VGS=10V, ID=18A 2.5 Gate-to-Drain "Miller" Charge Diode Forward Voltage VSD IS=18A, VGS=0V Turn-OFF Delay Time Fall Time Total Gate Charge 4.1 nC 0.98 1.2 V Package Dimensions unit : mm (typ) 7525-002 10.0 4.5 2.8 3.6 16.0 7.2 3.5 3.2 1.6 14.0 1.2 0.75 1 2 3 0.7 2.4 1 : Gate 2 : Drain 3 : Source 2.55 2.55 SANYO : TO-220ML(LS) Switching Time Test Circuit Avalanche Resistance Test Circuit VDD=30V VIN L 10V 0V 50 ID=9A RL=3.33 VIN D 2SK3702JS VOUT PW=10s D.C.1% 10V 0V 50 VDD G 2SK3702JS P.G 50 S No. A0632-2/5 2SK3702JS --25 C VDS=10V 10 V 6V Tc=25C 25 4V 20 15 10 VGS=3V 25 C 15 10 5 C 5 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 Drain-to-Source Voltage, VDS -- V 0 100 80 Tc= 75C 25C --25C 40 20 3 4 5 6 7 8 9 Gate-to-Source Voltage, VGS -- V 1.0 0.5 6 IT06198 9A , I D= = 4V V GS =10V , VGS A 9 I D= 60 40 20 --25 0 25 50 75 100 125 Case Temperature, Tc -- C Forward Transfer Admittance, yfs -- S Cutoff Voltage, VGS(off) -- V 1.5 0 --50 80 150 IT06200 yfs -- ID 5 2.0 5 100 IT06199 VDS=10V ID=1mA 4 120 0 --50 10 VGS(off) -- Tc 2.5 3 RDS(on) -- Tc 140 0 2 2 Gate-to-Source Voltage, VGS -- V ID=9A 120 60 1 IT06197 Static Drain-to-Source On-State Resistance, RDS(on) -- m Static Drain-to-Source On-State Resistance, RDS(on) -- m 5.0 RDS(on) -- VGS 140 VDS=10V 3 2 10 = Tc 7 C 25 5C --2 C 7 5 5 3 2 1.0 --25 0 25 50 75 100 125 Case Temperature, Tc -- C 2 150 3 5 7 2 1.0 3 5 7 VDD=30V VGS=10V 7 Switching Time, SW Time -- ns 5 Tc= 75C 25C --25C 1.0 7 5 3 2 0.1 7 5 3 2 3 IT06202 SW Time -- ID 1000 VGS=0V 10 7 5 3 2 2 10 Drain Current, ID -- A IT06201 IS -- VSD 100 7 5 3 2 Source Current, IS -- A Tc 0 --2 5 =7 5 20 C 25 C Drain Current, ID -- A 30 Tc= 25 8V 35 Drain Current, ID -- A ID -- VGS 30 75 C ID -- VDS 40 3 2 td(off) 100 7 tf 5 3 tr 2 td(on) 10 0.01 0 0.3 0.6 0.9 1.2 Diode Forward Voltage, VSD -- V 1.5 IT06203 7 5 0.1 2 3 5 7 1.0 2 3 5 7 10 Drain Current, ID -- A 2 3 5 7 100 IT06204 No. A0632-3/5 2SK3702JS Ciss, Coss, Crss -- VDS 3 f=1MHz 1000 Ciss 7 5 3 2 Coss Crss 100 8 7 6 5 4 3 2 1 7 0 5 0 5 10 15 20 25 Drain-to-Source Voltage, VDS -- V 30 0 0 ID=18A 1m 10 7 5 DC 3 2 Operation in this area is limited by RDS(on). 1.0 7 5 3 2 10 s s s 10 10 Allowable Power Dissipation, PD -- W PW<10s 10 3 2 0m ms s op era tio n Tc=25C Single pulse 0.1 0.1 2 3 10 15 20 Total Gate Charge, Qg -- nC IT06206 PD -- Ta 2.5 IDP=72A 100 7 5 5 IT06205 ASO 2 Drain Current, ID -- A VDS=30V ID=18A 9 Gate-to-Source Voltage, VGS -- V Ciss, Coss, Crss -- pF 2 2.0 1.5 1.0 0.5 0 5 7 1.0 2 3 5 7 10 2 Drain-to-Source Voltage, VDS -- V 3 5 7 100 IT06207 0 20 40 60 Avalanche Energy derating factor -- % 15 10 5 0 100 120 140 160 IT06208 EAS -- Ta 120 20 80 Ambient Tamperature, Ta -- C PD -- Tc 25 Allowable Power Dissipation, PD -- W VGS -- Qg 10 100 80 60 40 20 0 0 20 40 60 80 100 120 Case Temperature, Tc -- C 140 160 IT06209 0 25 50 75 100 125 Ambient Temperature, Ta -- C 150 175 IT10478 No. A0632-4/5 2SK3702JS Note on usage : Since the 2SK3702JS is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Specifications of any and all SANYO Semiconductor products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor products (including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO Semiconductor believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2006. Specifications and information herein are subject to change without notice. PS No. A0632-5/5