194D
www.vishay.com Vishay Sprague
Revision: 21-Nov-11 1Document Number: 40000
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Solid Tantalum Chip Capacitors,
TANTAMOUNT®, Conformal Coated
FEATURES
• 8 mm, 12 mm, 16 mm tape and reel
packaging available per EIA-481 and reeling
per IEC 60286-3, 7" [178 mm] standard
• Mounting: Surface mount
• Compliant to RoHS Directive 2002/95/EC
Note
*Pb containing terminations are not RoHS compliant, exemptions
may apply
PERFORMANCE CHARACTERISTICS
www.vishay.com/doc?40088
Operating Temperature: - 55 °C to + 85 °C
(To + 125 °C with voltage derating)
Capacitance Range: 0.10 μF to 330 μF
Capacitance Tolerance: ± 10 %, ± 20 % standard
Voltage Rating: 4 VDC to 50 VDC
Note
• Preferred tolerance and reel sizes are in bold.
We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage
substitutions will be marked with the higher voltage rating.
Note
• When solder coated terminations are required, add 0.015" [0.381 mm] to termination dimension tolerances
ORDERING INFORMATION
194D 225 X0 004 A 2 T
TYPE CAPACITANCE CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT + 85 °C
CASE CODE TERMINATION PACKAGING
This is expressed
in picofarads. The
first two digits are
the significant
figures. The third
is the number of
zeros to follow.
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 %
special order
This is expressed in volts.
To complete the
three-digit block, zeros
precede the voltage rating
See Ratings
and Case
Codes table
2 = Gold plated
(50 μ inch minimum)
standard
(RoHS compliant)
8 = 60/40 solder plated
7 = Hot solder dipped
T = T/R (full reel)
7" [178 mm] reel
standard
H = T/R (half reel)
7" [178 mm]
B = Bulk
DIMENSIONS in inches [millimeters]
CASE CODE W L H P T1T2 MAX.
A 0.050 ± 0.015
[1.27 ± 0.38]
0.100 ± 0.015
[2.54 ± 0.38]
0.050 ± 0.015
[1.27 ± 0.38]
0.030 ± 0.005
[0.76 ± 0.13]
0.005
[0.13]
0.015
[0.38]
B 0.050 ± 0.015
[1.27 ± 0.38]
0.150 ± 0.015
[3.81 ± 0.38]
0.050 ± 0.015
[1.27 ± 0.38]
0.030 ± 0.005
[0.76 ± 0.13]
0.005
[0.13]
0.015
[0.38]
C 0.050 ± 0.015
[1.27 ± 0.38]
0.200 ± 0.015
[5.08 ± 0.38]
0.050 ± 0.015
[1.27 ± 0.38]
0.030 ± 0.005
[0.76 ± 0.13]
0.005
[0.13]
0.015
[0.38]
D 0.100 ± 0.015
[2.54 ± 0.38]
0.150 ± 0.015
[3.81 ± 0.38]
0.050 ± 0.015
[1.27 ± 0.38]
0.030 ± 0.005
[0.76 ± 0.13]
0.005
[0.13]
0.015
[0.38]
E 0.100 ± 0.015
[2.54 ± 0.38]
0.200 ± 0.015
[5.08 ± 0.38]
0.050 ± 0.015
[1.27 ± 0.38]
0.030 ± 0.005
[0.76 ± 0.13]
0.005
[0.13]
0.015
[0.38]
F 0.135 ± 0.015
[3.43 ± 0.38]
0.220 ± 0.015
[5.59 ± 0.38]
0.070 ± 0.015
[1.78 ± 0.38]
0.030 ± 0.005
[0.76 ± 0.13]
0.005
[0.13]
0.015
[0.38]
G 0.110 ± 0.015
[2.79 ± 0.38]
0.265 ± 0.015
[6.73 ± 0.38]
0.110 ± 0.015
[2.79 ± 0.38]
0.050 ± 0.005
[1.27 ± 0.13]
0.005
[0.13]
0.015
[0.38]
H 0.150 ± 0.015
[3.81 ± 0.38]
0.285 ± 0.015
[7.24 ± 0.38]
0.110 ± 0.015
[2.79 ± 0.38]
0.050 ± 0.005
[1.27 ± 0.13]
0.005
[0.13]
0.015
[0.38]
W
L
T
P
H
PT2 max.
1 -
Weld and
dimple
projection
identies
anode (+)
terminal
194D
www.vishay.com Vishay Sprague
Revision: 21-Nov-11 2Document Number: 40000
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RATINGS AND CASE CODES
μF 4 V 6 V 10 V 15 V 20 V 25 V 35 V 50 V
0.10 AA
0.15 AA
0.22 AB
0.33 ABB
0.47 AA/BB C
0.68 A A/B B C D
1.0 A A/B A/B A/C D E
1.5 A A/B A/B B/C D E F
2.2 A A/B A/B A/B/C C/D E F F
3.3 A/B A/B A/B/C C/D D/E F F G
4.7 B A/B/C B/C/D D/E E/F F F/G H
6.8 B/C C/D D/E E/F F F/G G/H H
10 C/D D/E C/E/F E/F E/F/G F/G G/H
15 D/E E/F E/F F/G F/G H H
22 E/F F F/G F/G G/H H
33 F F/G F/G F/G/H H H
47 F/G F/G G/H G/H
68 F/G G/H H H
100 H H H
120 H H H
150 H H
330 H H
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz (%)
4 VDC AT + 85 °C, SURGE = 5 V; 2.7 VDC AT + 125 °C, SURGE = 3.4 V
2.2 A 194D225(1)004A(2)(3) 0.5 6
3.3 A 194D335(1)004A(2)(3) 0.5 6
3.3 B 194D335(1)004B(2)(3) 0.5 6
4.7 B 194D475(1)004B(2)(3) 0.5 6
6.8 B 194D685(1)004B(2)(3) 0.5 6
6.8 C 194D685(1)004C(2)(3) 0.5 6
10 C 194D106(1)004C(2)(3) 0.5 6
10 D 194D106(1)004D(2)(3) 0.5 6
15 D 194D156(1)004D(2)(3) 0.6 6
15 E 194D156(1)004E(2)(3) 0.6 6
22 E 194D226(1)004E(2)(3) 0.9 6
22 F 194D226(1)004F(2)(3) 0.9 6
33 F 194D336(1)004F(2)(3) 1.3 6
47 F 194D476(1)004F(2)(3) 1.9 6
47 G 194D476(1)004G(2)(3) 1.9 6
68 F 194D686(1)004F(2)(3) 2.7 6
68 G 194D686(1)004G(2)(3) 2.7 6
100 H 194D107(1)004H(2)(3) 4.0 8
120 H 194D127(1)004H(2)(3) 4.8 8
150 H 194D157(1)004H(2)(3) 6.0 8
330 H 194D337(1)004H(2)(3) 13.2 10
Notes
• Part number definitions:
(1) Tolerance: For 10 % tolerance, specify “X9”; for 20 % tolerance, change to “X0”, for 5 % tolerance specify “X5” (special order)
(2) Termination: For gold plated specify “2”, for solder plated 60/40 specify “8”, for hot solder dipped specify “7”
(3) Packaging code: For 7" reels specify “T”, for half of 7" reels specify “H”, for bulk specify “B”
(1) 5 % tolerance is not available for the 0.33 μF/50 V design
194D
www.vishay.com Vishay Sprague
Revision: 21-Nov-11 3Document Number: 40000
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
6 VDC AT + 85 °C, SURGE = 8 V; 4 VDC AT + 125 °C, SURGE = 5 V
1.5 A 194D155(1)006A(2)(3) 0.5 6
2.2 A 194D225(1)006A(2)(3) 0.5 6
2.2 B 194D225(1)006B(2)(3) 0.5 6
3.3 A 194D335(1)006A(2)(3) 0.5 6
3.3 B 194D335(1)006B(2)(3) 0.5 6
4.7 A 194D475(1)006A(2)(3) 0.5 6
4.7 B 194D475(1)006B(2)(3) 0.5 6
4.7 C 194D475(1)006C(2)(3) 0.5 6
6.8 C 194D685(1)006C(2)(3) 0.5 6
6.8 D 194D685(1)006D(2)(3) 0.5 6
10 D 194D106(1)006D(2)(3) 0.6 6
10 E 194D106(1)006E(2)(3) 0.6 6
15 E 194D156(1)006E(2)(3) 1.0 6
15 F 194D156(1)006F(2)(3) 1.0 6
22 F 194D226(1)006F(2)(3) 1.4 6
33 F 194D336(1)006F(2)(3) 2.1 6
33 G 194D336(1)006G(2)(3) 2.1 6
47 F 194D476(1)006F(2)(3) 3.0 6
47 G 194D476(1)006G(2)(3) 3.0 6
68 G 194D686(1)006G(2)(3) 4.3 6
68 H 194D686(1)006H(2)(3) 4.3 6
100 H 194D107(1)006H(2)(3) 6.0 8
120 H 194D127(1)006H(2)(3) 7.2 8
150 H 194D157(1)006H(2)(3) 9.0 8
330 H 194D337(1)006H(2)(3) 20.0 10
10 VDC AT + 85 °C, SURGE = 13 V; 7 VDC AT + 125 °C, SURGE = 9 V
1.0 A 194D105(1)010A(2)(3) 0.5 4
1.5 A 194D155(1)010A(2)(3) 0.5 6
1.5 B 194D155(1)010B(2)(3) 0.5 6
2.2 A 194D225(1)010A(2)(3) 0.5 6
2.2 B 194D225(1)010B(2)(3) 0.5 6
3.3 A 194D335(1)010A(2)(3) 0.5 6
3.3 B 194D335(1)010B(2)(3) 0.5 6
3.3 C 194D335(1)010C(2)(3) 0.5 6
4.7 B 194D475(1)010B(2)(3) 0.5 6
4.7 C 194D475(1)010C(2)(3) 0.5 6
4.7 D 194D475(1)010D(2)(3) 0.5 6
6.8 D 194D685(1)010D(2)(3) 0.7 6
6.8 E 194D685(1)010E(2)(3) 0.7 6
10 C 194D106(1)010C(2)(3) 1.0 6
10 E 194D106(1)010E(2)(3) 1.0 6
10 F 194D106(1)010F(2)(3) 1.0 6
15 E 194D156(1)010E(2)(3) 1.5 6
15 F 194D156(1)010F(2)(3) 1.5 6
22 F 194D226(1)010F(2)(3) 2.2 6
22 G 194D226(1)010G(2)(3) 2.2 6
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz (%)
Notes
• Part number definitions:
(1) Tolerance: For 10 % tolerance, specify “X9”; for 20 % tolerance, change to “X0”, for 5 % tolerance specify “X5” (special order)
(2) Termination: For gold plated specify “2”, for solder plated 60/40 specify “8”, for hot solder dipped specify “7”
(3) Packaging code: For 7" reels specify “T”, for half of 7" reels specify “H”, for bulk specify “B”
(1) 5 % tolerance is not available for the 0.33 μF/50 V design
194D
www.vishay.com Vishay Sprague
Revision: 21-Nov-11 4Document Number: 40000
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
10 VDC AT + 85 °C, SURGE = 13 V; 7 VDC AT + 125 °C, SURGE = 9 V
33 F 194D336(1)010F(2)(3) 3.3 6
33 G 194D336(1)010G(2)(3) 3.3 6
47 G 194D476(1)010G(2)(3) 4.7 6
47 H 194D476(1)010H(2)(3) 4.7 6
68 H 194D686(1)010H(2)(3) 6.8 6
100 H 194D107(1)010H(2)(3) 10.0 8
120 H 194D127(1)010H(2)(3) 12.0 8
15 VDC AT + 85 °C, SURGE = 20 V; 10 VDC AT + 125 °C, SURGE = 12 V
0.68 A 194D684(1)015A(2)(3) 0.5 4
1.0 A 194D105(1)015A(2)(3) 0.5 4
1.0 B 194D105(1)015B(2)(3) 0.5 4
1.5 A 194D155(1)015A(2)(3) 0.5 6
1.5 B 194D155(1)015B(2)(3) 0.5 6
2.2 A 194D225(1)015A(2)(3) 0.5 6
2.2 B 194D225(1)015B(2)(3) 0.5 6
2.2 C 194D225(1)015C(2)(3) 0.5 6
3.3 C 194D335(1)015C(2)(3) 0.5 6
3.3 D 194D335(1)015D(2)(3) 0.5 6
4.7 D 194D475(1)015D(2)(3) 0.7 6
4.7 E 194D475(1)015E(2)(3) 0.7 6
6.8 E 194D685(1)015E(2)(3) 1.1 6
6.8 F 194D685(1)015F(2)(3) 1.1 6
10 E 194D106(1)015E(2)(3) 1.6 6
10 F 194D106(1)015F(2)(3) 1.6 6
15 F 194D156(1)015F(2)(3) 2.4 6
15 G 194D156(1)015G(2)(3) 2.4 6
22 F 194D226(1)015F(2)(3) 3.5 6
22 G 194D226(1)015G(2)(3) 3.5 6
33 F 194D336(1)015F(2)(3) 5.3 6
33 G 194D336(1)015G(2)(3) 5.3 6
33 H 194D336(1)015H(2)(3) 5.3 6
47 G 194D476(1)015G(2)(3) 10.0 8
47 H 194D476(1)015H(2)(3) 7.0 6
68 H 194D686(1)015H(2)(3) 10.0 6
20 VDC AT + 85 °C, SURGE = 26 V; 13 VDC AT + 125 °C, SURGE = 16 V
0.47 A 194D474(1)020A(2)(3) 0.5 4
0.68 A 194D684(1)020A(2)(3) 0.5 4
0.68 B 194D684(1)020B(2)(3) 0.5 4
1.0 A 194D105(1)020A(2)(3) 0.5 4
1.0 B 194D105(1)020B(2)(3) 0.5 4
1.5 B 194D155(1)020B(2)(3) 0.5 6
1.5 C 194D155(1)020C(2)(3) 0.5 6
2.2 C 194D225(1)020C(2)(3) 0.5 6
2.2 D 194D225(1)020D(2)(3) 0.5 6
3.3 D 194D335(1)020D(2)(3) 0.7 6
3.3 E 194D335(1)020E(2)(3) 0.7 6
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz (%)
Notes
• Part number definitions:
(1) Tolerance: For 10 % tolerance, specify “X9”; for 20 % tolerance, change to “X0”, for 5 % tolerance specify “X5” (special order)
(2) Termination: For gold plated specify “2”, for solder plated 60/40 specify “8”, for hot solder dipped specify “7”
(3) Packaging code: For 7" reels specify “T”, for half of 7" reels specify “H”, for bulk specify “B”
(1) 5 % tolerance is not available for the 0.33 μF/50 V design
194D
www.vishay.com Vishay Sprague
Revision: 21-Nov-11 5Document Number: 40000
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
20 VDC AT + 85 °C, SURGE = 26 V; 13 VDC AT + 125 °C, SURGE = 16 V
4.7 E 194D475(1)020E(2)(3) 0.9 6
4.7 F 194D475(1)020F(2)(3) 0.9 6
6.8 F 194D685(1)020F(2)(3) 1.4 6
10 E 194D106(1)020E(2)(3) 2.0 6
10 F 194D106(1)020F(2)(3) 2.0 6
10 G 194D106(1)020G(2)(3) 2.0 6
15 F 194D156(1)020F(2)(3) 3.0 6
15 G 194D156(1)020G(2)(3) 3.0 6
22 G 194D226(1)020G(2)(3) 4.0 8
22 H 194D226(1)020H(2)(3) 4.4 6
33 H 194D336(1)020H(2)(3) 6.6 6
25 VDC AT + 85 °C, SURGE = 32 V; 17 VDC AT + 125 °C, SURGE = 20 V
0.33 A 194D334(1)025A(2)(3) 0.5 4
0.47 A 194D474(1)025A(2)(3) 0.5 4
0.47 B 194D474(1)025B(2)(3) 0.5 4
0.68 B 194D684(1)025B(2)(3) 0.5 4
1.0 A 194D105(1)025A(2)(3) 0.5 6
1.0 C 194D105(1)025C(2)(3) 0.5 4
1.5 D 194D155(1)025D(2)(3) 0.5 6
2.2 E 194D225(1)025E(2)(3) 0.6 6
3.3 F 194D335(1)025F(2)(3) 0.8 6
4.7 F 194D475(1)025F(2)(3) 1.2 6
6.8 F 194D685(1)025F(2)(3) 1.7 6
6.8 G 194D685(1)025G(2)(3) 1.7 6
10 F 194D106(1)025F(2)(3) 2.5 6
10 G 194D106(1)025G(2)(3) 2.5 6
15 H 194D156(1)025H(2)(3) 3.8 6
22 H 194D226(1)025H(2)(3) 5.5 6
33 H 194D336(1)025H(2)(3) 10.0 8
35 VDC AT + 85 °C, SURGE = 46 V; 23 VDC AT + 125 °C, SURGE = 28 V
0.10 A 194D104(1)035A(2)(3) 0.5 4
0.15 A 194D154(1)035A(2)(3) 0.5 4
0.22 A 194D224(1)035A(2)(3) 0.5 4
0.33 B 194D334(1)035B(2)(3) 0.5 4
0.47 B 194D474(1)035B(2)(3) 0.5 4
0.68 C 194D684(1)035C(2)(3) 0.5 4
1.0 D 194D105(1)035D(2)(3) 0.5 4
1.5 E 194D155(1)035E(2)(3) 0.5 6
2.2 F 194D225(1)035F(2)(3) 0.8 6
3.3 F 194D335(1)035F(2)(3) 1.2 6
4.7 F 194D475(1)035F(2)(3) 1.6 6
4.7 G 194D475(1)035G(2)(3) 1.6 6
6.8 G 194D685(1)035G(2)(3) 2.4 6
6.8 H 194D685(1)035H(2)(3) 2.4 6
10 G 194D106(1)035G(2)(3) 3.5 6
10 H 194D106(1)035H(2)(3) 3.5 6
15 H 194D156(1)035H(2)(3) 5.3 6
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz (%)
Notes
• Part number definitions:
(1) Tolerance: For 10 % tolerance, specify “X9”; for 20 % tolerance, change to “X0”, for 5 % tolerance specify “X5” (special order)
(2) Termination: For gold plated specify “2”, for solder plated 60/40 specify “8”, for hot solder dipped specify “7”
(3) Packaging code: For 7" reels specify “T”, for half of 7" reels specify “H”, for bulk specify “B”
(1) 5 % tolerance is not available for the 0.33 μF/50 V design
194D
www.vishay.com Vishay Sprague
Revision: 21-Nov-11 6Document Number: 40000
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
50 VDC AT + 85 °C, SURGE = 65 V; 33 VDC AT + 125 °C, SURGE = 38 V
0.10 A 194D104(1)050A(2)(3) 0.5 4
0.15 A 194D154(1)050A(2)(3) 0.5 4
0.22 B 194D224(1)050B(2)(3) 0.5 4
0.33 (1) B 194D334(1)050B(2)(3) 0.5 4
0.47 C 194D474(1)050C(2)(3) 0.5 4
0.68 D 194D684(1)050D(2)(3) 0.5 4
1.0 E 194D105(1)050E(2)(3) 0.5 4
1.5 F 194D155(1)050F(2)(3) 0.8 6
2.2 F 194D225(1)050F(2)(3) 1.1 6
3.3 G 194D335(1)050G(2)(3) 1.7 6
4.7 H 194D475(1)050H(2)(3) 2.4 6
6.8 H 194D685(1)050H(2)(3) 3.4 6
RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperatures below + 85 °C)
STANDARD CONDITIONS. FOR EXAMPLE: OUTPUT FILTERS
Capacitor Voltage Rating Operating Voltage
4.0 2.5
6.0 3.4
10 6.0
16 10
20 12
25 15
35 24
50 28
SEVERE CONDITIONS. FOR EXAMPLE: INPUT FILTERS
Capacitor Voltage Rating Operating Voltage
4.0 2.5
6.0 3.3
10 5.0
16 8.0
20 10
25 12
35 15
50 24
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz (%)
Notes
• Part number definitions:
(1) Tolerance: For 10 % tolerance, specify “X9”; for 20 % tolerance, change to “X0”, for 5 % tolerance specify “X5” (special order)
(2) Termination: For gold plated specify “2”, for solder plated 60/40 specify “8”, for hot solder dipped specify “7”
(3) Packaging code: For 7" reels specify “T”, for half of 7" reels specify “H”, for bulk specify “B”
(1) 5 % tolerance is not available for the 0.33 μF/50 V design
194D
www.vishay.com Vishay Sprague
Revision: 21-Nov-11 7Document Number: 40000
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
POWER DISSIPATION
CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 °C (W) IN FREE AIR
A 0.060
B 0.075
C 0.075
D 0.085
E 0.095
F 0.110
G 0.120
H 0.150
STANDARD PACKAGING QUANTITY
CASE CODE QUANTITY (pcs/reel) BULK, PLASTIC TRAY
QUANTITY
7" FULL REEL 7" HALF REEL
A 2500 1250 75
B 2500 1250 75
C 2500 1250 75
D 2500 1250 75
E 2500 1250 75
F 1000 500 75
G 600 300 60
H 600 300 50
PRODUCT INFORMATION
Conformal Coated Guide
www.vishay.com/doc?40150
Pad Dimensions
Package Dimensions
Moisture Sensitivity www.vishay.com/doc?40135
SELECTOR GUIDES
Solid Tantalum Selector Guide www.vishay.com/doc?49053
Solid Tantalum Chip Capacitors www.vishay.com/doc?40091
FAQ
Frequently Asked Questions www.vishay.com/doc?40110
Document Number: 91000 www.vishay.com
Revision: 11-Mar-11 1
Disclaimer
Legal Disclaimer Notice
Vishay
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
