Pre-packaged in heat-sealed plastic bags for use on assembly line.

Stock mounting hardware using one number for better control and identification. Part number can be printed on the bag if

Standard kit contains Thermalfilm insulator. For high maximum operating temperatures (550°C), order a mica insulator by

adding suffix letter "M" to the part number. For electrical isolation and excellent thermal resistance, use In-Sil-8 for an

insulator by adding suffix letter "S' to the part number.

Other insulator materials available include: hard anodized aluminum and aluminum oxide.

Refer to proper product section for drawings of insulators and shoulder washers used in the mounting kits.

Thermalsil III

2 1 Shoulder Washer 7721-7PPS

3 1 Flat Washer #4 MS15795-804

Hex Nut MS35649-244

4804MG Mica Insulator

4804SG Thermalsil III

Item Qty Description Part Number

Thermalsil III

2 2 Shoulder Washer 7721-5PPS

7 1 Solder Lug 322-156

DO-4 Mounting Kit No.4860

No. 4860 (Thermalfilm)

No. 4860M (Mica Insulator)

No. 4860S (Thermalsil III)

Part Number

5 1 Terminal, Locking MS77066-4

DO-5 Mounting Kit No.4870

RoHS Compliant

Mounting Kits

Need assistance?

Call us: 1-855-32-AAVID

Email: estore@aavid.com

Check Distributor

The Fine Print

Product Return Policy

Terms & Conditions

Privacy Policy

No. 4870 (Thermalfilm)

No. 4870M (Mica Insulator)

Part Number

3 1 Flat Washer #1/4 AN960-C416L

Hex Nut MS51972-1

5 1 Terminal, Locking MS77069-3

TO-66 Mounting Kit No.4813

Item Qty No. 4813 (Thermalfilm) Part Number

2 2 Shoulder Washer 7721-6PPS

3 2 Flat Washer #6 MS15795-803

Connect with Aavid