9709-0259 - Altech Corporation

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 3

Table of Contents

OVERVIEW –

Inductive Proximity Sensors

Introduction........................................4

Operation............................................5

CYLINDRICAL

Inductive Proximity Sensors

Introduction/Operation.......................8

Selection Guide, DC styles................12

Selection Guide, AC styles................14

Product Speciﬁcations......................16

LIMIT STYLE

Inductive Proximity Sensors

Introduction/Operation.....................68

Selection Guide.................................71

Product Speciﬁcations......................72

BLOCK STYLE

Inductive Proximity Sensors

Introduction/Operation.....................80

Selection Guide.................................82

Product Speciﬁcations......................84

RING STYLE

Inductive Proximity Sensors

Introduction/Operation.....................98

Selection Guide...............................100

Product Speciﬁcations....................102

OTHER INFORMATION

APPENDIX:

IP Codes .........................................132

NEMA requirements.......................133

Cross Reference.............................134

Glossary..........................................135

Conversion Charts..........................137

INDEX.............................................138

TERMS & CONDITIONS .................141

WARRANTY....................................143

ACCESSORIES for

Inductive Proximity Sensors

Introduction....................................113

Mounting Brackets .........................114

Cable Assemblies............................116

Switching Units...............................122

Motion Detectors............................128

All speciﬁcations subject to change without notice or obligation

CLICK FOR PDF FILE

FIND IT

98 ©Altech Corp. • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490

Ring Style Sensors

HOME

FIND IT

Operating Current– Ring Style

Mini Ring 200/400 mA

Standard Ring 80 mA

High Sensitivity Ring 50 mA

Analog Ring 5 mA

©Altech Corp. • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 99

RING STYLE INDUCTiVE

PROXIMITY SENSORS

Altech Ring Sensors ar e used for

variety of applications including

punching and stamping operations

to detect small metal parts and for

the identiﬁcation of metallic contam-

ination in bulk materials.

The sensitivity of all Altech Ring

Sensors is given in terms of a steel

metal ball diameter. This is the mini-

mum diameter steel ball that the

sensor will detect. Non-ferr ous

materials will r equire larger diame-

ter parts for correct sensor detec-

tion. See page 4, Figur e 1 for rated

operating distance corr ection fac-

tors.

OUTPUT CONNECTION

Mini Ring – Normally Open (NO)

Standard Ring – Complementary

High Sensitivity – Complementary

Analog – 1-9 V olt Analog

RING SENSOR MOUNTING

When high sensitivity ring sensors

are mounted in or near non-tar get

metal objects, car e must be exer-

cised in accor dance with the rec-

ommendations on the diagram.

See Figure 12.

Operating Voltages – Ring Style

Mini Ring 10 - 30V DC

Standard Ring 10 - 30V DC

High Sensitivity RIng 20 - 30V DC

Analog Ring 18-30V DC

ddd

221

Fig.12

Sensor Wiring Systems – Ring Style

Mini Ring 3 Wire

Standard Ring 4-Wire

High Sensitivity Ring 4-Wire (must connect to PULSO®8102-0900 Ampliﬁer)

Analog Ring 3-Wire

Ring Sensors installation in Metal Environment (min.permissible v alues)

Inside diameter Metal Plate Side Distances

SENSOR SENSOR = A hole dia.= B* d1 d2

9702-0259 20 30 10 0

9713-0059 35 60 40 0

9701-0259 51 85 60 0

9701-0759 51 85 50 0

9711-0059 71 120 65 0

9700-0159 100 180 100 30

9703-0159 202 260 150 0

9704-0159 294 400 200 0

* Metal plate must not mo ve

RING SENSOR INSTALLATION

D = C is permissible

HOME

FIND IT

100 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490

Sensitivity – Mimimum Steel Ball Diam. in mm Function

Size

Series (mm) 0.5 0.8 1.0 1.1 1.6 2.5 3.0 5.0 6.0 8.0 9.0 12 15 20 30 NPN PNP NO NC

Ø12 •••

Ø20 •••

Ø43 •••

Ø50 •••••

Ø100 •••••

Ø200 •••••

Ø300 •• • • •

Ø20 ••••

Ø 35 ••••

Ø50 ••••

Ø70 ••••

Ø100 ••••

Ø200 ••••

Ø300 ••••

130 x 130 ••••

245 x 290 ••••

Ø20 •

Ø43 •

DC RING SENSORS – SELECTION GUIDE

Mini Ring

10-30V DC, 200 mA

• Static Output

• Detect unwanted metal

• Detect and count parts

Normal Sensitivity

Standard Series

10-30V DC, 80 mA

• Static Output

• Large ring diameters

• Complementary Output

High Sensitivity

Standard Series

20-30V DC, 50 mA

• Dynamic Output

• Large ring diameters

• Complementary Output

Analog Ring

18-30V DC, 5 mA

• Analog Output

proportional to target size

HOME

FIND IT

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 101

Mounting Connection No. of Housing No. of

See Instructions Cable 59 Wires Material LED's Page

•• 3 ABS 1 102

••

4 Aluminum 1 104

••

4 Aluminum 1 104

••

4 Aluminum 1 104

••

4 Aluminum 1 105

••

4 Aluminum 1 105

••

4 Aluminum 1 106

••

4 Aluminum 1 106

••

4 Aluminum 1 107

••

4 Aluminum 1 107

••

4 Aluminum 1 108

••

4 Aluminum 1 108

••

4 Aluminum 1 109

••

4 Aluminum 1 109

••

4 Aluminum 1 110

••

4 Aluminum 1 110

•• 3 ABS 0 112

HOME

FIND IT

Fixed Cable

PVC 2m (6ft. 6in.).

For 5m (16 ft. 5 in.) cable length,

change the last two digits of the

part number to 02. For other

cable lengths and/or PUR cable,

please consult Altech.

DC - 3 WIRE

MINI RING SENSORS

Plastic Housing,

10 - 30V DC 200mA/400mA,

1 LED for Output Energized

•IEC (529) IP67 (NEMA 1, 3, 4, 6, 12,

13) Protection

•Short Circuit Protection

•Reverse Polarity Protection

• Temperature Range: -25 to 70°C

(-13 to 158°F)

102 Altech Corp ®• 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490

Note:Sensor dimensions in mm.

PNP

NPN

•Applications include

detection and counting parts

in punching/pressing systems

• Detect unwanted metal in

grinding operations

• Static Output

• Carries mark

Ring Diameter 12mm (.47 in.) 20mm (.79 in.) 43mm (1.69 in.)

Sensitivity (min.dia.steel ball) 2.5mm (.1 in.) 6mm (.24 in.) 9mm (.35 in.)

Cable or Connector Style Cat.No. Cable Cable Cable

Normally Open 9702-0400 9702-0500 9705-0500

Normally Closed

Normally Open

Normally Closed

Ripple V oltage ≤10% ≤10% ≤10%

Voltage Range 10V-30V 10V - 30V 10V - 30V

Supply Current ≤10 mA ≤10 mA ≤10 mA

Max.Load Current 400 mA 200 mA 200 mA

Voltage Drop Across Sensor ≤2.4V ≤2.4V ≤2.4V

Max.Leakage Currrent ≤10 µA ≤10 µA ≤10 µA

Switching F requency 800 Hz 1000 Hz 500 Hz

Housing Material PBTP (GV 30) ABS ABS

26,5

28,5

73,5

106

73,5

106

HOME

FIND IT

Altech Corp ®• 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 103

Metric/in.Conversion Table

8.0 mm = .31 in.

12.0 mm = .47 in.

18.0 mm = .70 in.

20.0 mm = .78 in.

24.0 mm = .94 in.

26.0 mm = 1.02 in.

26.5 mm = 1.04 in.

28.5 mm = 1.12 in.

35.0 mm = 1.37 in.

39.0 mm = 1.53 in.

43.0 mm = 1.69 in.

47.0 mm = 1.85 in.

58.0 mm = 2.32 in.

73.5 mm = 2.89 in.

106.0mm= 4.17 in.

This table

converts millimeters

to inches in reference

to the illustrations

included on these

pages

Wiring Diagrams

Accessories

LOAD

BR +

Fixed Cable

Normally Open

–

•

PNP

Note: Wire colors ar e applicable on cable

purchased fr om Altech

HOME

FIND IT

59 Style Connector

4-pin, Metal, 19mm (.75 in.)

device

DC - 4 WIRE RING SENSORS

ALUMINUM HOUSING

10-30V DC,80mA

1 LED for Output Energized

•IEC(529) IP67 (NEMA 1, 3, 4, 6, 12,

13) Protection

• Temperature Range: -25 to 70°C

(-13 to 158°F)

104 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490

PNP

NPN

•Applications inc lude the

detection and counting of parts

in punching/pressing operations

•Detection of unwanted metal

in grinding operations

• Complementary outputs av ailable

•Static Output

• Carries mark

6,2

190

115

166

120

100

166

836

120

100

Ring Diameter 50mm (1.97 in.) 100mm (3.94 in.) 100mm (3.94 in.)

Sensitivity (min.dia.steel ball) 3mm (.12 in.) 8mm (.31 in.) 6mm (.24 in.)

Cable or Connector Style Cat.No. 59 59 59

(Complementary NO/NC) 9705-0659 9708-0559 9708-0659

(Complementary NO/NC) 9705-0259 9708-0059 9708-0159

Ripple V oltage ≤10% ≤10% ≤10%

Voltage Range 10-30V 10-30V 10-30V

Supply Current ≤25 mA ≤25 mA ≤25 mA

Max.Load Current 80 mA 80 mA 80 mA

Voltage Drop Across Sensor ≤0.5V NPN ≤0.5V NPN ≤0.5V NPN

≤1.5V PNP ≤1.5V PNP ≤1.5V PNP

Max.Leakage Current ≤10µA ≤10µA ≤10µA

Switching F requency 500Hz 500Hz 500Hz

HOME

FIND IT

Wiring Diagrams

Accessories

2 meter (6 ft.6 in.) DC Cable Assemblies

for Quic k Disconnect Sensors

59 Connector 9512-0200 PVC, Straight

Change last digit of connector number to 2

for 5 meter cab le

Refer to pages 116-121 f or more

cable inf ormation

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 105

LOAD

–

•

LOAD

N/C

N/O

•

RED

WHT

BLK

Note:Sensor dimensions in mm.

Metric/in.Conversion Table

80.0 mm = 3.15 in.

90.0 mm = 3.58 in.

100.0mm= 3.93 in

115.0mm= 4.52 in.

120.0mm= 4.72 in.

160.0mm= 6.29 in.

162.0mm= 6.37 in.

166.0 mm= 6.52 in.

190.0 mm= 7.47 in.

202.0mm= 7.94 in.

260.0mm= 10.23 in

290.0mm= 11.41 in.

294.0mm= 11.20 in.

305.0mm= 12.00 in.

340.0mm= 13.40 in.

382.0mm= 15.03 in.

397.0mm= 15.62 in.

This table converts

millimeters to inch-

es in reference to

the illustrations

included in this

catalog

PNP NPN

LOAD

–

•

LOAD

N/C

N/O

•

RED

WHT

BLK

Note: Wire colors ar e applicable to cable

purchased fr om Altech

8,5

305

290

260

202

162

160

340

382

397

8,5

294

6.2 mm = .24 in.

7.0 mm = .27 in.

8.0 mm = .31 in

8.5 mm = .33 in.

36.0 mm =1.41 in.

40.0 mm =1.57 in.

45.0 mm =1.77 in.

48.0 mm =1.89 in.

50.0 mm =1.96 in.

200mm (7.87 in.) 300mm (11.81 in.)

15mm (.59 in.) 30mm (1.18 in.)

59 59

9706-0659 9707-0659

9706-0159 9707-0159

≤10% ≤10%

10-30V 10-30V

≤25 mA ≤25 mA

80 mA 80 mA

≤0.5V NPN ≤0.5V NPN

≤1.5V PNP ≤1.5V PNP

≤10µA ≤10µA

300Hz 300Hz

HOME

FIND IT

59 Style Connector

4-pin, Metal, 19mm (.75 in.)

device

DC - 4 WIRE HIGH SENSITIVITY

RING SENSORS

ALUMINUM HOUSING

20-30V DC,50mA

1 LED for Output Ener gized

•IEC(529) IP67 (NEMA 1, 3, 4, 6, 12,

13) Protection

•Short Circuit Protection

•Reverse Polarity Protection

• Temperature Range: -25 to 70°C

(-13 to 158°F)

106 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490

PNP

NPN

•Applications inc lude the

detection and counting of parts

in punching/pressing operations

•Detection of unwanted metal

in grinding operations

• Complementary outputs av ailable

•Dynamic output – m ust be oper-

ated with 8102-0900 Unit

• Carries mark

6,2

190

115

166

120

Ring Diameter 20mm (.79 in.) 35mm (1.38 in.)

Sensiitivity (min.dia.stel ball) .5mm (.02 in.) .5mm (.02 in.)

Cable or Connector Style Cat.No. 59 59

(Complementary NO/NC)

(Complementary NO/NC) 9702-0259 9713-0059

Ripple V oltage ≤10% ≤10%

Voltage Range 20-30V 20-30V

Supply Current ≤35 mA ≤35 mA

Max.Load Current 50 mA 50 mA

Voltage Drop Across Sensor ≤1V at 10 mA ≤1V at 10 mA

≤3.5V at 50 mA ≤3.5V at 50 mA

Max.Leakage Current ≤500µA ≤500µA

Switching F requency 100Hz 100Hz

HOME

FIND IT

Wiring Diagrams

Accessories

2 meter (6 ft.6 in.) DC Cable Assemblies

for Quic k Disconnect Sensors

59 Connector 9512-0200 PVC, Straight

Change last digit of connector number to 2

for 5 meter cab le

Refer to pages 116-121 f or more

cable inf ormation

Notes:

High Sensitivity Ring Sensors hav e a dynamic

output – a short output pulse (10 msec) is

released during metal detection.

The 8102-0900 switching unit m ust be ulilized

for proper oper ation.

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 107

Note:Sensor dimensions in mm.

Metric/in.Conversion Table

6.2 mm = .24 in.

7.0 mm = .27 in.

8.0 mm = .31 in.

35.0 mm = 1.37 in.

36.0 mm = 1.41 in.

40.0 mm = 1.57 in.

45.0 mm = 1.77 in.

48.0 mm = 1.89 in.

50.0 mm = 1.96 in.

80.0 mm = 3.15 in.

90.0 mm = 3.58 in.

115.0mm= 4.52 in.

120.0mm= 4.72 in.

166.0 mm= 6.52 in.

190.0 mm= 7.47 in.

This table converts

millimeters to inch-

es in reference to

the illustrations

included in this

catalog

NPN

8102-0900

switching

unit

RED

WHT

BLK

166

120

6,2

190

115

Note: Wire colors ar e applicable on cables

purchased fr om Altech

50mm (1.97 in.) 50mm (1.97 in.)

.8mm (.03 in.) 1.0mm (.04 in.)

59 59

9701-0759 9701-0259

≤10% ≤10%

20-30V 20-30V

≤35 mA ≤35 mA

50 mA 50 mA

≤1V at 10 mA ≤1V at 10 mA

≤3.5V at 50 mA ≤3.5V at 50 mA

≤500µA ≤500µA

100Hz 100Hz

HOME

FIND IT

59 Style Connector

4-pin, Metal, 19mm (.75 in.)

device

DC - 4 WIRE HIGH SENSITIVITY

RING SENSORS

ALUMINUM HOUSING

20-30V DC,50mA

1 LED for Output Ener gized

•IEC(529) IP67 (NEMA 1, 3, 4, 6, 12,

13) Protection

•Short Circuit Protection

•Reverse Polarity Protection

• Temperature Range: -25 to 70°C

(-13 to 158°F)

108 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490

PNP

NPN

•Applications inc lude the

detection and counting of parts

in punching/pressing operations

•Detection of unwanted metal

in grinding operations

• Complementary outputs av ailable

•Dynamic output – m ust be oper-

ated with 8102-0900 Unit

• Carries mark

166

120

166

836

120

100

Ring Diameter 70mm (2.76 in.) 100mm(3.94)

Sensitivity (min.dia.steel ball) 1.1mm (.039 in.) 1.6mm (.059 in.)

Cable or Connector Style Cat.No. 59 59

(Complementary NO/NC)

(Complementary NO/NC) 9711-0059 9700-0159

Ripple V oltage ≤10% ≤10%

Voltage Range 20-30V 20-30V

Supply Current ≤35 mA ≤35 mA

Max.Load Current 50 mA 50 mA

Voltage Drop Across Sensor ≤1V at 10 mA ≤1V at 10 mA

≤3.5V at 50 mA ≤3.5V at 50 mA

Max.Leakage Current ≤500µA ≤500µA

Switching F requency 100Hz 100Hz

HOME

FIND IT

Wiring Diagrams

Accessories

2 meter (6 ft.6 in.) DC Cable Assemblies

for Quic k Disconnect Sensors

59 Connector 9512-0200 PVC, Straight

Change last digit of connector number to 2

for 5 meter cab le

Refer to pages 116-121 f or more

cable inf ormation

Notes:

High Sensitivity Ring Sensors hav e a dynamic

output – a short output pulse (10 msec) is

released during metal detection.

The 8102-0900 switching unit m ust be ulilized

for proper oper ation.

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 109

Note:Sensor dimensions in mm.

NPN

8102-0900

switching

unit

RED

WHT

BLK

162

8,5

305

290

260

202

160

340

382

397

8,5

294

Metric/in.Conversion Table

120.0mm = 5.50 in.

160.0mm = 6.29 in.

162.0mm= 6.37 in.

166.0 mm= 6.52 in.

202.0mm= 7.94 in.

260.0mm=10.23 in.

290.0mm=11.41 in.

294.0mm= 11.20 in.

305.0mm= 12.00 in.

340.0mm= 13.81 in.

382.0mm= 15.03 in.

397.0mm= 15.62 in.

This table converts

millimeters to inch-

es in reference to

the illustrations

included in this

catalog

7.0 mm = .27 in.

8.0 mm = .31 in.

8.5 mm = .33 in.

36.0 mm = 1.41 in.

70.0 mm = 2.75 in.

80.0 mm = 3.15 in.

100.0mm= 3.93 in.

Note: Wire colors ar e applicable on cables

purchased fr om Altech

200mm (7.87 in.) 300mm (11.81 in.)

3.0mm (.118 in.) 5.0mm (.196 in.)

59 59

9703-0159 9704-0159

≤10% ≤10%

20-30V 20-30V

≤35 mA ≤35 mA

50 mA 50 mA

≤1V at 10 mA ≤1V at 10 mA

≤3.5V at 50 mA ≤3.5V at 50 mA

≤500µA ≤500µA

100Hz 100Hz

HOME

FIND IT

59 Style Connector

4-pin, Metal, 19mm (.75 in.)

device

DC - 4 WIRE HIGH SENSITIVITY

RING SENSORS

ALUMINUM HOUSING

20-30V DC,50mA

1 LED for Output Ener gized

•IEC(529) IP67 (NEMA 1, 3, 4, 6, 12,

13) Protection

•Short Circuit Protection

•Reverse Polarity Protection

• Temperature Range: -25 to 70°C

(-13 to 158°F)

110 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490

Note:Sensor dimensions in mm.

PNP

NPN

•Applications inc lude the

detection and counting of parts

in punching/pressing operations

•Detection of unwanted metal

in grinding operations

• Complementary outputs av ailable

•Dynamic output – m ust be oper-

ated with 8102-0900 Unit

• Carries mark

31 160

130

188

190

317

342

108

245

297

348

323

290

Ring Diameter 130 x 130mm (5.12 in.x 5.12 in.) 245 x 290mm (9.65 x 11.42 in.)

Sensitivity (min.dia.steel ball) 5mm (.196 in.) 12mm (.472 in.)

Cable or Connector Style Cat.No. 59 59

(Complementary NO/NC)

(Complementary NO/NC) 9709-0359 9709-0259

Ripple V oltage ≤10% ≤10%

Voltage Range 20-30V 20-30V

Supply Current ≤35 mA ≤35 mA

Max.Load Current 50 mA 50 mA

Voltage Drop Across Sensor ≤1V at 10 mA ≤1V at 10 mA

≤3.5V at 50 mA ≤3.5V at 50 mA

Max.Leakage Current ≤500µA ≤500µA

Switching F requency 100Hz 100Hz

HOME

FIND IT

Wiring Diagrams

Notes:

High Sensitivity Ring Sensors hav e a dynamic

output – a short output pulse (10 msec) is

released during metal detection.

The 8102-0900 switching unit m ust be ulilized

for proper oper ation.

Accessories

2 meter (6 ft.6 in.) DC Cable Assemblies

for Quic k Disconnect Sensors

59 Connector 9512-0200 PVC, Straight

Change last digit of connector number to 2

for 5 meter cab le

Refer to pages 116-121 f or more

cable inf ormation

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 111

NPN

8102-0900

switching

unit

RED

WHT

BLK

Metric/in.Conversion Table

188.0 mm = 7.39 in.

190.0 mm = 7.43 in.

245.0mm = 9.63 in.

297.0mm =11.67 in.

317.0mm =12.45 in.

342.0mm =13.44 in.

This table converts

millimeters to inch-

es in reference to

the illustrations

included in this

catalog

7.0 mm = .27 in.

9.0 mm = .35 in.

31.0 mm = 1.22 in.

72.0 mm = 2.83 in.

108.0mm= 4.24 in.

130.0 mm= 5.11 in.

160.0 mm= 6.29 in.

Note: Wire colors ar e applicable on cables

purchased fr om Altech

HOME

FIND IT

112 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490

DC - 3 WIRE ANALOG

RING SENSORS

18-30V DC,5mA

1-9 Volt Analog Output

Note:Sensor dimensions in mm.

Metric/in.Conversion Table

18.0 mm = .70 in.

20.0 mm = .78 in.

24.0 mm = .94 in.

26.0 mm = 1.02 in.

35.0 mm = 1.37 in.

This table converts millimeters to inches in reference

to the illustrations included on these pages

43.0 mm = 1.7 in.

58.0 mm = 2.3 in.

73.5 mm = 2.9 in.

106.0mm= 4.2 in.

•Analog output v oltage

proportional to metal target size

•Carries mark

Wiring Diagrams

–

•

BLK

Fixed Cable

Analog

Note: Wire colors ar e applicable to cable

purchased fr om Altech

Fixed Cable

PVC 2m (6ft. 6in.).

For 5m (16 ft. 5 in.)

cable length, change

the last two digits of

the part number to 02.

For other cable

lengths and/or PUR

cable, please consult

Altech.

73,5

106

73,5

106

Accessories

•IEC(529) IP67 (NEMA 1, 3, 4, 6, 12,

13) Protection

• Short Circuit Pr otection

•Overload Protection

• Temperature Range: -25 to 70°C (-13 to 158°F)

Ring Diameter 20mm (.79 in.) 43mm (1.69 in.)

Sensitivity (steel ball dia.) Ø 0.5mm - Ø6mm Ø 1mm - Ø20mm

Cable or Connector Style Cat.No. Cable Cable

9714-2000 9714-4300

V oltage Range 18V - 30V DC 18V - 30V DC

Supply Current ≤10 mA ≤10 mA

Maximum Load Current 5mA 5 mA

Switching F requency 50Hz 50Hz

Temperature Drift ±0.4V ±0.4V

Repeatability ≤1% ≤1%

Housing Material ABS ABS

Output V oltage Range 1 - 9V DC 1 - 9V DC

The analog output v oltage can be digitized

by the 8100-2100 s witching unit and

8100-2400/2500 modules.

(Separate Accessory items - refer to pa ges

125 - 126 for more inf ormation.)

HOME

FIND IT