Thyristor Modules Thyristor/Diode Modules ITRMS ITAVM VRRM PSKT 95 PSKH 95 = 2x 180 A = 2x 116 A = 800-1800 V Preliminary Data Sheet VRSM VRRM VDSM VDRM V V 900 1300 1500 1700 1900 800 1200 1400 1600 1800 Type TO-240 AA Version 1 PSKT 95/08io1 PSKT 95/12io1 PSKT 95/14io1 PSKT 95/16io1 PSKT 95/18io1 -PSKH 95-12io1 -PSKH 95-16io1 -- Symbol Test Conditions ITRMS, IFRMS ITAVM, IFAVM TVJ = TVJM TC = 85C; 180 sine ITSM, IFSM TVJ = 45C; VR = 0 i2dt (di/dt)cr 1 Version 8 PSKT PSKT PSKT PSKT PSKT 95/08io8 95/12io8 95/14io8 95/16io8 95/18io8 A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 2250 2400 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 2000 2150 A A TVJ = 45C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 25 300 23 900 A2s A2 s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 20 000 19 100 A2 s A2 s TVJ = TVJM repetitive, IT = 250 A f =50 Hz, tP =200 s VD = 2/3 VDRM IG = 0.45 A non repetitive, IT = ITAVM diG/dt = 0.45 A/s 150 A/s PSKH Version 8 500 A/s Features PGM TVJ = TVJM IT = ITAVM tP = 30 s tP = 300 s 1000 PGAV VRGM 10 V TVJ TVJM Tstg -40...+125 125 -40...+125 C C C t = 1 min t=1s Md Mounting torque (M5) Terminal connection torque (M5) Weight Typical including screws 4 5 3000 3600 V~ V~ 2.5-4.0/22-35 Nm/lb.in. 2.5-4.0/22-35 Nm/lb.in. 90 g 6 7 1 5 4 2 3 1 542 3 6 1 5 2 3 1 5 2 International standard package, JEDEC TO-240 AA Direct copper bonded Al2O3 -ceramic base plate Planar passivated chips Isolation voltage 3600 V~ UL registered, E 148688 Gate-cathode twin pins for version 1 Applications DC motor control Softstart AC motor controller Light, heat and temperature control Advantages Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated. 3 PSKT Version 8 V/s W W W 50/60 Hz, RMS IISOL 1 mA 7 PSKH Version 1 10 5 0.5 VISOL 6 PSKT Version 1 180 116 TVJ = TVJM; VDR = 2/3 VDRM RGK = ; method 1 (linear voltage rise) 3 PSKH 95/08io8 PSKH 95/12io8 PSKH 95/14io8 PSKH 95/16io8 PSKH 95/18io8 Maximum Ratings (dv/dt)cr 2 Space and weight savings Simple mounting with two screws Improved temperature and power cycling capability Reduced protection circuits 2002 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 http://store.iiic.cc/