Power PCB Relay G6D-ASI 145
Power PCB Relay
G6D-ASI
• Reduced board space ideal for high-density mounting
(45% smaller than the surface area of G6B).
• Slim package: measures 6.5 W x 17.5 L x 12.5 H mm
• Switches loads up to 5 A, 250 VAC/30 VDC.
• Sealed construction allows automatic soldering and cleaning.
• Long service life: up to 300,000 operations with a 2 A,
250 VAC/30 VDC load.
• Rated for D150 pilot duty by UL, CSA.
• Optional mounting socket simplifies relay installation and
servicing of finished equipment.
• RoHS Compliant.
R
CE
Ordering Information
To Order: Select the part number and add the desired coil voltage rating, (e.g., G6D-1A-ASI-DC12).
■Accessories
Connecting Socket
Specifications
■Contact Data
Note: P level: λ60 = 0.1 x 10-6/operation
Type Contact form Terminal Construction Model
Standard SPST-NO PCB Fully sealed G6D-1A-ASI
Description Model
PCB mount socket for G6D relay P6D-04P
Load Resistive load (p.f. = 1) Inductive load (p.f. = 0.40, L/R = 7 ms)
Rated load 5 A at 250 VAC, 30 VDC 2 A at 250 VAC, 30 VDC
Contact material Ag alloy
Carry current 5 A
Max. operating voltage 250 VAC, 30 VDC
Max. operating current 5 A
Max. switching capacity 1,250 VA, 150 W 500 VA, 60 W
Min. permissible load 10 mA at 5 VDC
146 Power PCB Relay G6D-ASI
■Coil Data
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C (73°F) with a tolerance of ±10%.
2. Operating characteristics are measured at a coil temperature of 23°C (73°F).
3. The pick-up voltage is 75% or less of rated voltage if the relay is mounted upside down.
■Characteristics
Note: Data shown are of initial value.
■Characteristic Data
Rated
voltage
(VDC)
Rated
current
(mA)
Coil
resistance
(Ω)
Pick-up
voltage Dropout
voltage Maximum
voltage Power
consumption
(mW)
% of rated voltage
5 40 125 70% max. 10% min. 160% at 23°C Approx. 200
12 16.7 720
24 8.3 2,880
Contact resistance 100 mΩ max.
Operate time 10 ms max.
Release time 5 ms max.
Operating
frequency Mechanical 18,000 operations/hour
Electrical 1,800 operations/hour (under rated load)
Insulation resistance 1,000 MΩ min. (at 500 VDC)
Dielectric strength 3,000 VAC, 50/60 Hz for 1 minute between coil and contacts
750 VAC, 50/60 Hz for 1 minute between contacts of the same polarity
Surge withstand voltage 6,000 V, 1.20 x 50 μs between coil and contacts
Vibration Mechanical durability 10 to 55 Hz, 1.50 mm (0.06 in) double amplitude
Malfunction durability 10 to 55 Hz, 1.50 mm (0.06 in) double amplitude
Shock Mechanical durability 1,000 m/s2 (approx. 100 G)
Malfunction durability 100 m/s2 (approx. 10 G)
Ambient temperature Operating -25° to 70°C (-13° to 158°F)
Humidity 5% to 85% RH
Life expectancy Mechanical 20 million operations min. (at operating frequency of 18,000 operations/hour)
Electrical 70,000 operations min. at rated loads (300,000 operations min for 2A at 250 VAC, 30 VDC,
resistive load)
Weight Approx. 3 g (0.10 oz)
Maximum Switching Capacity
30
10
5
3
1
0.1
0 3 5 10 30 100 250 500 1,000
0.3
0.5
50
DC resistive
load
DC inductive
load
AC inductive
load
cosφ=0.4
AC resistive load
Switching current (A)
Switching voltage (V)
Life Expectancy
Life Expectancy (x10
4
operations)
Switching current (A)
1 2 3 4 5 6 7 8 9 10
500
300
100
50
30
10
5
3
0
250-VAC/30-VDC resistive load
250-VAC/30 VDC inductive load
(cosφ=0.4/ L/R=7 ms)
Ambient Temperature vs.
Maximum Coil Voltage
Note: The maximum coil voltage is the
maximum voltage that can be
applied to the relay coil.
02330405060708090
180
160
140
120
80
60
100
200
Maximum coil voltage (%)
Ambient temperature (°C)
Power PCB Relay G6D-ASI 147
Dimensions
Unit: mm
Note: Orientation marks are indicated as follows:
■Relays
■Socket
Ambient Temperature vs.
Pickup and Drop out Voltage
G6D-1A-ASI
Sample: G6D1A
Quantity: 5
Operating voltage
Recovery voltage
max.
min.
X
max.
min.
X
80
60
0
20
40
100
Pickup and Drop out voltage
(ratio of rated voltage) (%)
−40 −20 0 20 40 60 80
Ambient temperature (°C)
Malfunctioning Shock
G6D-1A-ASI
Y
YXX'
Z
Z'
Y'
1,000
800
600
400
200
206
Energized Unit: m/s2
Not energized
X
Z'
Z
X'
Shock direction
Coil terminals
Y'
Measurement conditions: Impose a shock in the
±X, ±Y, and ±Z directions three times each with
the Relay energized to check the shock values
that cause the Relay to malfunction.
G6D-1A-ASI
Terminal Arrangement/
Internal Connections
(Bottom View)
Mounting Holes
(Bottom View)
Tolerance: ±0.1
0.5 17.5 max.
2.54
0.3
3.5
5.08
0.8
5.08
0.5
(17.3)*
6.5 max.
(6.4)*
1
13
57
(1.13)
(0.71)
2.54
2.54
15.24
5.08
Four, 1.1-dia.
holes
*Average value
12.5 max.
(12.4)*
7.62.
P6D-04P
2.54
3.6
10.8
0.65 0.3
5.0876.2
19.7 max.
6.9 max.
(6.7)*
6+0.1
(19.5)*
(2.18)
(0.86)
2.54
2.54
15.24
5.08
Mounting Holes
(Bottom View)
Tolerance: ±0.1
Four, 1.1-dia.
holes
*Average value
148 Power PCB Relay G6D-ASI
■Approvals
•
The rated values approved by each of the safety standards may be different from the performance characteristics individually defined in this catalog.
UL Recognized (File No. E41515) - - Ambient Temp. = 40°C
CSA Certified (File No. LR31928)
EN/TÜV Approval (Registration No. R50029064/EN61810-1)
Note: 1. The rated values approved by each of the safety standards (e.g., UL, CSA, TUV) may be different from the performance characteristics
individually defined in this catalog.
2. In the interest of product improvement, specifications are subject to change.
Precautions
■Spacing Between Relays
More than two relays can be closely mounted right side up as shown
in the illustration below.
More than two relays can be closely mounted upside down as shown
in the illustration below.
Note: The space between each relay required for heat radiation may
vary with operating conditions.
■Socket Mounting
When mounting the relay, insert it into the socket as vertically as pos-
sible so that the relay terminals contact securely with the contact pins
on the socket.
The P6D-04P socket is flux-resistant. Do not wash the socket with
water.
Remove the relay from the socket before soldering the socket to a
PC board.
Mounting height
Model Number of poles Coil ratings Contact ratings Number of test
operations
G6D-1A-ASI 1 5 to 24 VDC 5 A, 250 VAC 6,000
5 A, 30 VDC
Model Number of poles Coil ratings Contact ratings Number of test
operations
G6D-1A-ASI 1 5 to 24 VDC 5 A, 250 VAC (General Use) 6,000
5 A, 30 VDC (Resistive)
Model Number of poles Coil ratings Contact ratings Number of test
operations
G6D-1A-ASI 1 5, 12, 24 VDC 5 A, 250 VAC (cosφ=1.0) 70,000
5 A, 30 VDC (0 ms)
Current flow:
5 A max.
6.5 mm
18.5 mm max.
Power PCB Relay G6D-ASI
MEMO
Power PCB Relay G6D-ASI
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
Cat. No. X301-E-1b Printed in USA
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
09/11 Specifications subject to change without notice
All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which
can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.