Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EE57 –
22
Capacitance (µF)
Rated Voltage Mark
Series identification
Mark for Lead-Free
Products Black Dot
(Square)
Lot number
Negative polarity
marking (–)
jFC
A±0.2
WL
()Reference size
φD±0.5
H
B±0.2
(I)
K
(P) (I)
+
–
0.3 max.
Pressure Relief (φ10 and larger)
■Features
● Endurance : 105 °C 1000 h
● Low impedance (1/2 for HA series)
● Vibration-proof product is available upon request. (φ8 mm and larger)
● RoHS directive compliant
Surface Mount Type
Series: FC Type: V
■Specifi cations
Category Temp. Range –40 °C to +10 5 °C
Rated W.V. Range 6.3 V.DC to 50 V.DC
Nominal Cap. Range 1 µF to 1500 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
tan δPlease see the attached standard products list
Characteristics
at Low Temperature
W.V. (V) 6.3 10 16 25 35 50
(Impedance ratio at 120 Hz)Z(–25 °C) / Z(+20 °C) 2 2 2 2 2 2
Z(–40 °C) / Z(+20 °C) 3 3 3 3 3 3
Endurance
After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized
at +20 °C, Capacitors shall meet the following limits.
Capacitance change ±20 % of initial measured value
tan δ< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance.(With voltage treatment)
Resistance to
Soldering Heat
After refl ow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan δ< initial specifi ed value
DC leakage current < initial specifi ed value
■Di men sions in mm (not to scale) ■Marking
Rated Voltage Mark (mm)
j6.3 V
A10 V
C16 V
E25 V
V35 V
H50 V
Example:6.3 V 22 µF
Marking color : BLACK
Size
code DLA, B H I W P K
B 4.0 5.4
- 0.2 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35 - 0.20
C 5.0 5.4
- 0.2 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35 - 0.20
D 6.3 5.4
- 0.2 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 - 0.20
E 8.0 6.2±0.3 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35 - 0.20
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2
+ 0.15
+ 0.15
+ 0.15
+ 0.15
+ 0.1
+ 0.1
+ 0.1
HA
FC
Low impedance
앖
Frequency (Hz)
50, 60 120 1 k 10 k 100 k to
Correction factor 0.70 0.75 0.90 0.95 1.00
■Frequency correction factor for ripple current
Sep. 201103
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EE58 –
■Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation
Part No.
(RoHS:compliant) Refl ow
Min.
Packaging Q'ty
Dia. Length Size
Code
Ripple
Current
(100 kHz)
(+105°C)
tan δ
(120 Hz)
(+20 °C)
Impedance
(100 kHz)
(+20 °C)
Taping
(V) (µF) (mm) (mm)
(mA r.m.s.)
(액)(pcs)
6.3
22 4 5.4 B 60 0.26 3.00 EEEFC0J220R (1) 2000
47 5 5.4 C 95 0.26 1.80 EEEFC0J470R (1) 1000
68 6.3 5.4 D 140 0.26 1.00 EEEFC0J680P (1) 1000
100 6.3 5.4 D 140 0.26 1.00 EEEFC0J101P (1) 1000
220 8 6.2 E 230 0.26 0.40 EEEFC0J221P (2) 1000
330 8 10.2 F 450 0.26 0.30 EEEFC0J331P (2) 500
1000 10 10.2 G 670 0.26 0.15 EEEFC0J102P (2) 500
1500 10 10.2 G 670 0.26 0.15 EEEFC0J152P (2) 500
10
33 5 5.4 C 95 0.19 1.80 EEEFC1A330R (1) 1000
100 8 6.2 E 230 0.19 0.40 EEEFC1A101P (2) 1000
150 8 6.2 E 230 0.19 0.40 EEEFC1A151P (2) 1000
220 8 10.2 F 450 0.19 0.30 EEEFC1A221P (2) 500
470 10 10.2 G 6700.19 0.15 EEEFC1A471P (2) 500
1000 10 10.2 G 670 0.19 0.15 EEEFC1A102P (2) 500
16
10 4 5.4 B 60 0.16 3.00 EEEFC1C100R (1) 2000
22 5 5.4 C 95 0.16 1.80 EEEFC1C220R (1) 1000
47 6.3 5.4 D 140 0.16 1.00 EEEFC1C470P (1) 1000
68 8 6.2 E 230 0.16 0.40 EEEFC1C680P (2) 1000
100 8 6.2 E 230 0.16 0.40 EEEFC1C101P (2) 1000
220 10 10.2 G 6700.16 0.15 EEEFC1C221P (2) 500
330 10 10.2 G 6700.16 0.15 EEEFC1C331P (2) 500
470 10 10.2 G 6700.16 0.15 EEEFC1C471P (2) 500
680 10 10.2 G 6700.16 0.15 EEEFC1C681P (2) 500
25
6.8 4 5.4 B 60 0.14 3.00 EEEFC1E6R8R (1) 2000
22 6.3 5.4 D 140 0.14 1.00 EEEFC1E220P (1) 1000
33 6.3 5.4 D 140 0.14 1.00 EEEFC1E330P (1) 1000
47 8 6.2 E 230 0.14 0.40 EEEFC1E470P (2) 1000
68 8 10.2 F 450 0.14 0.30 EEEFC1E680P (2) 500
100 8 10.2 F 450 0.14 0.30 EEEFC1E101P (2) 500
220 10 10.2 G 6700.14 0.15 EEEFC1E221P (2) 500
330 10 10.2 G 6700.14 0.15 EEEFC1E331P (2) 500
470 10 10.2 G 6700.14 0.15 EEEFC1E471P (2) 500
35
145.4B600.123.00
EEEFC1V1R0R (1) 2000
2.2 4 5.4 B 60 0.12 3.00 EEEFC1V2R2R (1) 2000
3.3 4 5.4 B 60 0.12 3.00 EEEFC1V3R3R (1) 2000
4.7 4 5.4 B 60 0.12 3.00 EEEFC1V4R7R (1) 2000
6.8 5 5.4 C 95 0.12 1.80 EEEFC1V6R8R (1) 1000
10 5 5.4 C 95 0.12 1.80 EEEFC1V100R (1) 1000
22 6.3 5.4 D 140 0.12 1.00 EEEFC1V220P (1) 1000
33 8 6.2 E 230 0.12 0.40 EEEFC1V330P (2) 1000
47 8 6.2 E 230 0.12 0.40 EEEFC1V470P (2) 1000
100 10 10.2 G 6700.12 0.15 EEEFC1V101P (2) 500
220 10 10.2 G 6700.12 0.15 EEEFC1V221P (2) 500
330 10 10.2 G 6700.12 0.15 EEEFC1V331P (2) 500
50
145.4B300.12 5.00 EEEFC1H1R0R (1) 2000
2.2 4 5.4 B 30 0.12 5.00 EEEFC1H2R2R (1) 2000
3.3 4 5.4 B 30 0.12 5.00 EEEFC1H3R3R (1) 2000
4.7 5 5.4 C 50 0.12 3.00 EEEFC1H4R7R (1) 1000
10 6.3 5.4 D 70 0.12 2.00 EEEFC1H100P (1) 1000
22 8 6.2 E 120 0.12 0.70 EEEFC1H220P (2) 1000
33 8 10.2 F 300 0.12 0.60 EEEFC1H330P (2) 500
47 10 10.2 G 500 0.12 0.30 EEEFC1H470P (2) 500
100 10 10.2 G 500 0.12 0.30 EEEFC1H101P (2) 500
220 10 10.2 G 500 0.12 0.30 EEEFC1H221P (2) 500
The taping dimensions are explained on EE188 of our Catalog.
Please use it as a reference guide.
Refl ow Profi le (Fig-1 to Fig-11) listed on EE186 of our Catalog.
Endurance : 105 °C 1000 h
Sep. 201000
