REVISION Z DO NOT SCALE FROM THIS PRINT PATENT NUMBER 2 MAX SWAY 6159045 ((No OF POS + 2) x .03937) + .100 REF [1.0000] [2.54] .1096 2.783 REF C2 (No OF POS -1) x .03937 [1.0000] "A" DETAIL 'D' SCALE 6 : 1 02 .268 6.81 REF "A" 'D' (No OF POS + 2) x .03937 REF [1.0000] No OF POSITIONS -05, -08, -20, -30, -40, -50, -60 & -70 (PER ROW - SEE TABLE 2) CARD THICKNESS -01: .031 THICK CARD (USE MEC1-XX-T-D-RAX-X-SL) -02: .062 THICK CARD (USE MEC1-XX-S-D-RAX-X-SL) (SEE TABLES 1 AND 4) MEC1-XX-X-D-RA1-X-SL (No OF POS + 2) x .03937 REF [1.0000] OPTION -TR: TAPE & REEL (SUBSTITUTE -T: FOR -TR: DESIGNATION WHEN USING -XM PLATING DESIGNATION WITH BOTH -NP AND -SL OPTIONS) (-T OR -TR OPTION NOT AVAILABLE FOR 70 POS) SOLDER LOCKS NON-POLARIZED OPTION -NP: NO POLARIZED POSITION (ONLY AVAILABLE ON -05, -08, -20, & -30 POSITIONS) -BLANK: BODY IS POLARIZED TAIL OPTION -RA1: STANDARD -RA2: ELEVATED ROW SPECIFICATION -D: DOUBLE (USE MEC1-XX-X-D-RAX-X-SL) PLATING -F: GOLD FLASH (USE C-150-XX-F-P) -L: LIGHT SELECTIVE GOLD (USE C-150-XX-L-P) -S: SELECTIVE GOLD (USE C-150-XX-S-P) -FM: FLASH GOLD SELECTIVE, MATTE TIN TAIL (USE C-150-XX-F-P) -LM: LIGHT SELECTIVE GOLD, MATTE TIN TAIL (USE C-150-XX-L-P) -SM: SELECTIVE GOLD, MATTE TIN TAIL (USE C-150-XX-S-P) "A" REF 01 MEC1-1XX-XX-XX-D-RAX-XX-SL-XX "B" .002 (TYP) (SEE NOTE 8) C5 "C" .005 .134 3.40 REF .169 4.29 .460 11.68 REF .225 5.72 REF .320 8.13 REF 'F' .470 11.94 .03[.8] C4 .0394 1.000 .070 1.78 REF C3 C-150-01-X-P .013 0.32 REF (TYP) C-150-04-X-P .059 1.50 .025 0.64 REF (TYP) (No OF POS -1) x .03937[1.0000] .022 0.56 REF .0394 1.000 SEE TABLE 3 SECTION "A"-"A" .01 0.2 REF (TYP) MEC1-120-02-XX-D-RA1-SL SHOWN (IN-PROCESSES ON SHEET 2) NOTES: "E" DETAIL 'F' SCALE 4 : 1 1. C REPRESENTS A CRITICAL DIMENSION. 2. COPLANARITY: SEE TABLE 3. C1 3. BURR ALLOWANCE: .004[0.10] MAX. 4. NOTE DELETED. 5. MINIMUM PUSHOUT FORCE: .5 LB. 6. NOTE DELETED. 7. TAIL OPTION -RA1 TO HAVE C-150-01-XX-X CONTACT FULLY PRE-FORMED. 8. TO BE MEASURED ON OPPOSING CONTACTS. 9. BODIES TO BE LAYER PACKAGED FOR TRANSIT BETWEEN INVENTORY AND PRODUCTION. 10. TO BE MEASURED AT 2 MAIN 90 BENDS. 11. HOT BAR FORM AFTER ASSEMBLY (WILL PRODUCE RETENTION FLANGE AS SHOWN). 12. -F PLATING OPTION CAN BE SUBBED FOR -FM, -L FOR -LM, & -S FOR -SM SWAY .049 1.23 REF SEE NOTE 11 DETAIL 'E' SCALE 4 : 1 1.5 MAX UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: DECIMALS .350 8.89 REF ANGLES .XX: .01 [.3] 2 .XXX: .005 [.13] .XXXX: .0020 [.051] PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. MATERIAL: DO NOT SCALE DRAWING FLAMMABILITY RATING: UL 94V-0 SHEET SCALE: 2:1 INSULATOR: LCP -01: COLOR: NATURAL -02: COLOR: BLACK CONTACT: PHOS BRONZE F:\DWG\MISC\Mktg\MEC1-1XX-XX-XX-D-RAX-XX-SL-XX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: 1mm MEC1 -RA ASSEMBLY DWG. NO. MEC1-1XX-XX-XX-D-RAX-XX-SL-XX BY: MARKS 01/25/00 SHEET 1 OF 3 REVISION Z IN PROCESS (C-150-04-X-P SHOWN) (-RA1 SECOND ROW) C7 .2225 5.652 (SEE NOTE 10) PACKAGING VIEW STANDARD TAIL OPTION .4082 10.367 ELEVATED TAIL OPTION C8 90 .092 2.34 .1430 3.632 .2045 5.194 C4 TUBE: PT-1-24-01-106 PLUG: TP-07 90 TUBE: PT-1-24-02-106 PLUG: TP-13 * DIMENSIONS ALSO APPLY TO C-150-14-X-P IN-PROCESS 2 IN-PROCESS 1 (-RA1 SECOND ROW) (-RA1 FIRST ROW) C-150-X1-X-P C-150-X4-X-P .089 2.26 .017 0.43 .325 8.24 REF .511 12.98 REF PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 4:1 F:\DWG\MISC\Mktg\MEC1-1XX-XX-XX-D-RAX-XX-SL-XX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: 1mm MEC1 -RA ASSEMBLY DWG. NO. MEC1-1XX-XX-XX-D-RAX-XX-SL-XX BY: MARKS 01/25/00 SHEET 2 OF 3 REVISION Z IN-PROCESS 2 (-RA2 FIRST ROW) C10 C12 .1270 3.225 (SEE NOTE 10) C9 .3110 7.899 (SEE NOTE 10) C-150-X5-X-P 90 .3058 7.767 .4072 10.342 .0920 2.337 .0170 0.432 C13 90 .017 0.43 .432 10.97 .0378 0.959 +2 90 - 5 .354 8.99 C11 .1160 2.946 Z 90 .1390 3.531 IN-PROCESS 2 (-RA2 SECOND ROW) C14 C-150-X6-X-P IN-PROCESS 1 IN-PROCESS 1 (-RA2 SECOND ROW) (C-150-06-X-P SHOWN) (-RA2 FIRST ROW) (C-150-05-X-P SHOWN) * DIMENSIONS ALSO APPLY TO C-150-15-X-P .092 2.34 * DIMENSIONS ALSO APPLY TO C-150-16-X-P MEC1-120-02-XX-D-RA2-SL SHOWN C-150-06-X-P TAIL OPTION -RA2 [ELEVATED] SHOWN "B" [DIFFERENT AS SHOWN, OTHERWISE SAME AS TAIL OPTION -RA1] .010 0.25 .239 6.07 REF 'G' .354 8.98 REF .360 9.14 .219[5.55] REF .035 0.89 C15 .024 0.62 REF .002 .003[0.06 0.08] "B" 'C' 'B' SECTION "B"-"B" SCALE 3 : 1 MEC1-XX-X-D-RA2-SL-X SEE TABLE 3, SHT 1 C-150-05-X-P F:\DWG\MISC\Mktg\MEC1-1XX-XX-XX-D-RAX-XX-SL-XX-MKT.SLDDRW C19 C17 .025 0.64 (TYP) C18 PROPRIETARY NOTE .022 0.56 REF .048 1.22 THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. 5 MAX .123 3.12 DETAIL 'B' SCALE 8 : 1 (DIMENSIONS APPLY TO -RA1 & -RA2 OPTIONS) (SEE NOTE 11 & DETAIL "E", SHT 1) DETAIL 'C' SCALE 10 : 1 (APPLIES TO BOTH ROWS) DO NOT SCALE DRAWING DETAIL 'G' SCALE 4 : 1 SHEET SCALE: 2:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: 1mm MEC1 -RA ASSEMBLY DWG. NO. MEC1-1XX-XX-XX-D-RAX-XX-SL-XX BY: MARKS 01/25/00 SHEET 3 OF 3