1. REVISION REV |DESCRIPTION DATE H1 |}REVISED PER ECO11005139 29MAR11 ADHESIVE COATING (SEE NOTE 3) W TYP H DIA H DIA } | AS SUPPLIED AFTER UNRESTRICTED RECOVERY NOTES: inches All dimensions are in ; [millimeters | TABLE OF DIMENSIONS 2. Dimensions appearing in table are as follows: a As Supplied H P W b After Unrestricted Recovery PART +15% + . . . . . . NUMBER| Min | Max |-10% 20% 5. Adhesive is optional. As supplied dimensions qa b b b appearing in table are for uncoated parts. When adhesive is added, entry diameters SSC1 59 16 1.5 .08 will be reduced by .06 max. [10] | [4] | [58,0] | [2,0] 4. Part numbers SSC2 thru SSC7 available ssc_2 .79 .30 2.2 .09 with valves by adding TV to the part number. [20] | [7.5] | [55,0] ) [2,3] 5. Material: polyolefin, commercial, rigid per Ssc3 1.38 .59 3.5 .12 PPS3011/25. Adhesive: PPS 3012/70. [35] | [15] | [90,0] | [3,0] 6. Parts are te be marked with part number 2.17 | .98 | 56 | .13 ny waite INK SSC~4 | T55] | [25] [743.01] [3.3] (IE. SSCX) Ssc_5 27.95 | 1.25 5.9 13 7. eee 5 pes Some 8 costing oF genes. [75] [32] |150,0]| [3,3] > a Spiral boos ave the adhesive applie conan) 282 [22 | | 75) | 32) | [79.5] | [3.3] | ORDERING INFORMATION: ssc_g | 2:94 | 1:77 | 64 15 End cap, uncoated: [100] | [45] |[162,0]) [3,8] SSCX/U Ssc_7 4.72 | 2.76 5.7 15 Self sealing end cap with thermoplastic adhesive: 7 [120] | [70] |[145,0]| [3,3] SSCX/239 and valves: SSCXTV/239. IF THIS DOCUMENT IS PRINTED IT BECOMES UNCONTROLLED.CHECK FOR THE LATEST REMSION. S p EC | F| CAT O N C O NTR O L D RAW| N GC ESE RES WEB [oe Rosmano |10/02/2001| MEE TEE cmmcvay SE ARRESTS ZONES DIMENSIONS ARE IN BRACKETS. . MENLO PARK, CALIFORNIA 94025 DECIMAL TOLERANCES MATERIAL me mr egge [ou na X +0.020 [ 0.50 mm] j= F N\ [) CAP S ANGLE TOLERANCE X +05 DEG. RPN SIZE CODE IDENT. NO. | DWG. NO. THIRD ANGLE bo A 06090 SSCX _ MP04019 PRONECTION DO NOT SCALE THIS DRAWING | SHEET 1 OF 1