Features
•Power ratings:
– input DC voltage: 375 V to 425 V
– output voltage: 48 V
– maximum output current: 62.5 A
– output power: 3 kW
– peak efficiency: 95.3%
– HF transformer isolation voltage: 4 kV
• Resonant and switching frequencies:
– max DC-DC switching frequency: 380 kHz (at startup)
– closed loop switching frequency: 120 kHz to 250 kHz
– resonant frequency: 175 kHz
• Protection mechanisms:
– undervoltage and overvoltage protection on input and output
– overtemperature protection
– short-circuit protection
– forced cooling with air flow speed modulation according to the output power
and temperature
• Efficiency:
– adaptive synchronous rectification
– light load burst mode
• Digital control with STM32F334 microcontroller
Description
The STEVAL-DPSLLCK1 is a digitally controlled 3 kW full bridge LLC resonant DC-
DC converter with output synchronous rectification. The kit consists of a power board,
digital control board, adapter board, and firmware modules.
The full bridge primary section of the LLC converter is based on MDmesh DM2
Power MOSFETs for high efficiency performance. The PWM switching frequency is
digitally controlled to regulate the output voltage. The converter operates at near
resonant frequencies to maximize efficiency and achieve Zero Voltage Switching
(ZVS) over the entire operating range.
The HF transformer provides galvanic isolation and magnetic integration of the
inductive elements for a compact design.
Synchronous rectification (SR) with STripFET F7 Power MOSFETs is employed on
the secondary side to reduce conduction losses.
The STM32F334 microcontroller on the digital control board embeds a high
resolution timer for finer regulation and can communicate status information via
USART, CAN, SMBus, and opto-coupled serial communication.
Both the primary and secondary sections are supplied by an off-line flyback circuit
based on VIPer27HD which provides regulated voltages to the control board, the
gate driver ICs and the signal conditioning circuits.
You can connect a PFC to the power board and extend communication and
interfacing with the supplied adapter board.
Product summary
Bill of Materials and Schematics
3 kW power supply
evaluation kit
STEVAL-
DPSLLCK1
Main components and software
STM32F3x4
microcontroller STM32F334
MDmesh DM2
Power MOSFET STW70N60DM2
STripFET F7 Power
MOSFET STP310N10F7
off-line high voltage
converter VIPER27
Further reading and support
Applications Power supplies and
converters
Community and
blogs
ST Community
ST blog
3 kW Full Bridge LLC resonant digital power supply evaluation kit
STEVAL-DPSLLCK1
Data brief
DB3560 - Rev 2 - March 2019
For further information contact your local STMicroelectronics sales office.
www.st.com
1STEVAL-DPSLLCK1 schematics
Figure 1. STEVAL-DPSLLCP1 power board - LLC power stage schematic
R88
0
2
390K
VCC sec
R99
GND
SD/OD_2
+5V_prim
C83
C66
11
1
1
1
C87
470u
1
2
C90
6
5
4
2
R165
1µF
330
D74
1
C103
+
SOURCE_SR_LS1
2
1
STP310N10F7
C60
LIN 1
D27
DT 5
C62
330
STPS1L30
160
GND
1
100nF
C71
GND
2
12 HVG
13
VIN+
5
GND2
L4
470ohm
B1
4.02k
C65
VDS_SR1
R158 (N.M.) C84
CURR_TRANS
1
+5V_prim
CP+
10
1
10µF/35V
C126
D68
3
2
Vout-
7
220nF
ACS758LCB-100U-PFF-T
15nF
1N4148
R105
Vcc 4
1
C98
SD/OD_1
12
VCC pri
2
1
R127
R159 (N.M.)
18nF
GND1
1N4148
100nF
16
100nF
R118
C37
C105
STW70N60DM2
1µF
SGND 7
PGND
R51
NM
1
+5V_prim
100k
R130
2
1
2
ISOLATION BARRIER
-
+
ACPL-P484
R101
TP38
0 N.M.
1
1
J3
GND1
C89
PWM_SR_LS1
HT1
R145
DC Vout Monitor
GND1
100nF
2
R125
C81
PWM_FB_HS2
C75
Q6
3
VBUS
DC Bus Monitor
3
43
GND1
470u
4,7n
C79
6
5
4
TP35
HIN 3
2.2nF
R92
D23
F2
C97
100nF
11 OUT
12
R147
4
5
3
1
D65 STTH1R06A
C131
1
1µF
TP28
Q12
1
VCC sec
100pF
100pF
2
R79
R133
C92
2
+
CP-
9
10µF/35V
C134
10k
2
68K
2
3
C70
1
10k
2
470u
2
1
1
4.7
1
2
TP18
2
R103
2.2nF
+
C138
CP-
9
D40
1
SD/OD
HIN 3
3
3
1
SOURCE_SR_LS2
13 BOOT
R144
+3.3V
2.2k
11
100nF
0
R73
1µF
470u
7
PGND
1
8LVG
R78
DC output current
D26
GND
GATE_FB_LS1
NM
R107
2
STW70N60DM2
10k
2
1
1
20
C124
C139
GND_POWER
R137
+
R72
20
U8
LIN 1
CP+
Q11
3
2
1
TP17
330
1
1N4148
GATE_FB_LS1
1
TP32
1
SOURCE_FB_HS2
Heatsink1
C130
all resistors are 1% of tollerance
10µF/35V
C108
A_GND
0
R67
5
HVG
13
1
2
C82
N.M
L6491IC2
1
6
5
4
GND
R114
4
10µF/35V
C36
TP24
14
DT 5
C74
all resistors are 1% of tollerance
+
3
3
7
LIN 1
ACPL-P484
+
D55
1nF
VCC pri
47µF
1µF
10µF/35V
R142
4
Vcc
11 OUT
GATE_SR_LS2
R131
A_GND
1
2
SPS1H100
0
U4
GND
10k
R153
12 HVG
A_GND
1µF
R152
D24
1
TP21
1
TP20
2
FAN_PWM
1
2
C44
2
100nF
A_GND
N.M
TSZ121ILT
STW70N60DM2
8LVG
4.3k
C73
1
C77
R112330
R94
5
1µF
10k
2
R138
GATE_FB_LS2
1
1
15nF
4.7
1
1nF
D32
1
10k
12
2
C80
STP310N10F7
7.87K
R139
VCC sec
1
R155
10k
BOOT
3Out
+
PWM_FB_HS1
XFRM_LIN/CT-SEC_3
1n
TP42
STTH1R06A
R161
R53
8LVG
R150
10
3.9 mH
D73
C109
680
1
N.M
U10
TP37
D42 STPS1L30
C59
R117
B2
GATE_SR_HS1
4.7
PWM_SR_HS2
1
150pF
4.7nF
0
R77
2
2
SOURCE_FB_LS2
GND1
4
3
T3
R70
6
5
4
2
2
1
1
1
FAN
Jumper
ACPL-P484
R100
470µF
10
TP19
1
1
2
Vcc
1
D62
9,1V 500m
R157 (N.M.)
C33
1
0
R93
2
1
1
1µF
1nF
1
R89
U5
1
D72
VDDA
GATE_SR_LS1
R95
D25
100nF
2
R134
C85
STTH1R06A
R164
15
GND
D54
100k
1
2
1
2
+5V
10µF/35V
C48
Vout 48V
1
4.3k
T2
Q9
1
TP31
11 OUT
1
C54
1
SD/OD_3
STP310N10F7
C57
R58
SOURCE_SR_HS1
1
1
2
GND_POWER
1+VS
R119
R71
20
R146
10
1
C122
7
PGND
13
10µF/35V
VO 2
D43
3
100nF
TP40
C55
SOURCE_FB_LS1
Q4
1
N.M
R108
10K
CON2
C63
1
D64
1
1
TP41
R104
3
SOURCE_FB_HS1
STP310N10F7
100nF
1
SOURCE_FB_LS1
1
R52
100nF
C51
9CP-
2
C133
OUT
12
1
D22
VDD1
100pF
2
R98
Q10
100nF
D63
2
Probe insertion for
current sensing
1
1
1µF
External fan supply voltage:
Remove J12 before applying
external supply voltage
2
6
GATE_SR_LS2
68K
D75
C78
PGND
8LVG
N.M
0
N.C.
N.M
Temperature
STTH1R06A
N.M
1
GND1
R111
1
0
+5V_prim
R124
C76
C69
R96
Vcc 4
C102
100nF
C29
220nF
C42
2
2.2µF
3
C68
C41
0
SOURCE_SR_HS1
2
C123
RED LED
LM19CIZ
1
R63
20
C132
1
A_GND
CP-
9
+
1
C43
3
4
100nF
D71 STTH1R06A
R129
1
Q1
15nF
C49
D66
C99
C67
1
1
0
+
R97
2
C61
2
2
R151
1
11
4.3k
2
GND1
D60
SOURCE_SR_HS2
N.C.
2
18nF
VCC pri
R81
R132
47nF
IP+ 4
TP33
10µF/35V
D33
VIN-
4GND1
C117
R90
CP+
10
C53
1
1
1
2
1
10
C52
2
GATE_FB_HS2
10
R148
2
N.M
STPS1L30
L6491IC3
1
R57
2
1
2
+5V_prim
R160
2
SD/OD
L3
10k
HVG
13
1
1
STP310N10F7
R13539R
C50
R116
VCC sec
PWM_FB_LS2
PWM_SR_LS2
4.02k
Q5
C100
100nF
2
C106
C94GATE_FB_LS2
TP43
1
C135
15nF
C45
10k
NM
Vout+
8
VDD2
STP310N10F7
CS1
GND1
ACPL-P484
A_GND
C1014.3k
4.7
2
10k
C58
W
1
2
3
VDDA
1
10k
VCC pri
GND1
10
D35
150pF
1
2
R122
GATE_SR_HS2
330
1
1
10
1
GND
2V7, 500mW
A_GND
1
18nF
U6
GATE_SR_LS1
N.M
+
1
TP30
1
1
Resonance Current
GATE_SR_HS1
1µF
GND1
2
1
1
1
LIN 1
GND
C86
100nF
BOOT
14
J5
1nF
L6491IC1
2
SD/OD_4
R80
100nF
D70
Fuse+Fuse case 5x20
1
-
1
GND
SOURCE_SR_LS1
SD/OD
HIN 3
F1
6
470µF
R102
100nF
U9
Vcc 4
Q8
t
TP25
C110
6
SGND
C46
R149
2
U7
1
100nF
1
100nF
6
R121
N.C.
VBUS
SOURCE_FB_LS2
D67
2
STD12NF06LT4
1
1
1µF
DC Output Current
Q2
D34
GND1
STW70N60DM2
J1
1
2
2GND
14
DT 5
49.9k
470u
0
2
1
Power Term
PWM_FB_LS1
10nF
2
330
14
DT 5
2
SD/OD
CON2
100nF
C32
N.C.
11
7
8
TP23
2
2
2
5
IP-
ACPL-782T
1
1
1
R136
1n
TP36
1
3
100k
TP34
+3.3V
GND
+
-
L6491IC4
1
1
2
PWM_SR_HS1
100nF
SOURCE_SR_HS2
VDS_SR2
D52
1
390K
1nF
2.2nF
J2
1
9
4.99K
0
+
N.M 6.2k
C64
49.9k
SPS1H100
R115
HIN 3
R143
GND1
+
C93
330
TP29
2
J4
N.
R163
M
220nF
TP22
Vout 48V
R140
2
11
1µF
1
1
1
0
R55
N.M
2
2
D69 STTH1R06A
C104
1
330
3
1
2.2nF
R128
C107
0
R162
4.99K
100k
1
2
BOOT
1nF
1
1
C96
Power Term
TP16
GND
2
STP310N10F7
R106
1
1N4148
R64
R68
R167
Q13
1
VCC sec
100pF
2.2k
1
2
2
100
2
N.M
R156 (N.M.)
SOURCE_SR_LS2
STTH1R06A
R126
2
1n
C128
100nF
GND
6
STPS1L30
3
C72
N.M
N.M
6
SGND
TP39
C30
14
SGND 7
390K
C91
STP310N10F7
0
R54
470u
CON2
Q3
1
1
2
C95
68K
1µF
2
STTH1R06A
SOURCE_FB_HS2
1
1n
C129
1
10k
TP26
2.2µF
6
Earth
2
R123
1
VCC sec
1
2
GND1
470
D57
CP+
VCC pri
GATE_FB_HS1
1
1
R49
4
4
GATE_FB_HS2
1
1
CON3
1
R76
1
GND1
SOURCE_FB_HS1
390K
1
1
2
R46
8
9
11
10
GATE_FB_HS1
Q7
VCC pri
2
4
4
2
C88
2
220nF
R109
GATE_SR_HS2
R69
R154
A_GND
1
C39
N.M
R47
TP27
0
R56
D61
STEVAL-DPSLLCK1
STEVAL-DPSLLCK1 schematics
DB3560 - Rev 2 page 2/7
Figure 2. STEVAL-DPSLLCP1 power board - Aux SMPS schematic
4
LD1117DT50TR
R7
1
8.2k
100nF
GND
10
1
1
0
R2
3.3
GND1
2
1
1
VIPER27HD
D9
16
TP44
STPS1150A
1
GND
D3
TP4
VCC sec
10
1
GND
C3
33nF
R3
0
GND1
100µF
D6
0
R1
2
13
0
R63.3
DIODE Zener 18V 1W
1
STPS1L40U
5
C7
2
U1
VBUS
2
VOUT
14
GND1
C12
TP1
2
D1
C15
1
1
12
1
1
1k
7
STTH102A
BR
15
R12
3
CONT
L11µH
VCC pri
1
1
GND
0.1µF
R13
GND1
47k
GND
C5
C2
D2
U3
D7
C1
LD1117DT50TR
22µF
U2
1
+
TS2431
82k
C92.2nF
5V
100nF
6
1µF
C10
GND1
470µF
R8
2.2R4
C125
TP3
C13
470µF
D5
C11
3
9
C4
+
6
2
STPS1150A
VDD
4
CONTROL
T1
C6
470µF
R10
R14
2K
GND
OPTO1
220
STPS1150A
3.3nF
R5
C8
8
9
2
VOUT
D76
1
1
100µF
DRAIN
SOURCE
5
D4
DIODE Zener 18V 1W
1
D8
PC817
33nF
8
TP2
GND1
FB
1
GND1
100µF
GND1
12V
GND
R166
3
4
N.A.
R11
+5V
3
GND1
7
STPS1150A
100µF
3.3K
R9
+5V_prim
VIN 3
VR1
VIN 3
PKC-136
11
GND
TP45
C14
DIODE Zener 15V 1W
Figure 3. STEVAL-DPSLLCP1 power board - filtering and connector schematic
A_GND
12B
13A
TP10
C22 R310
BAT754
R19
4A
27A
28A
+5V
Resonance Current
21A 21B
BAT41KFILM
10A 10B
PWM_7
28B
30B
D16
25A 25B
100nF
C26
C136
VDDA
DC Output Current sensing
PWM_FB_LS1
PWM_1
TP14
D18
A_VDD
13A 13B
R410
CAN_TX
SMBus_SCL/UI_USART_RX
SMBus_SDA/UI_USART_TX
D14
470 Ohm 10oMHz 215 mA
23A 23B
8A 8B
A_VDD
22B
23A
4B
5A
TP13
Note: Keep all filtering parts traces short as
possible to connector P1
25B
7A
7A
10B
11A
100
R210
P1
28A
29A
+5V
20B
21A
1B
2A
2A
PWM_5
A_GND
24A 24B
GND
R23100
R24100
TP9
30B
26A
2
32A 31B
VDS_SR1 sensing
+5V
PWM_2
10pF
R260
270
17A 17B
VDDA
R330
DC Bus Monitor sensing
R370
Resonance Current sensing
31B
32B
8B
9A
VDDA
16B
17A
1
29A
30A
BAT754
11A 11B
Temperature sensing
C21
1B
D17
22A 22B
A_GND
USART_TX_iso
9A 9B 9B
7B 7B
24B
25A
PWM_8
GND_iso
PWM_FB_HS1
15A 15B
D12
14A 14B
2.7nF
18B
19A
DC Vout Monitor sensing
+3.3V
R400
ADC_4/DIFF_ADC_2-/OP-AMP_2-
COMP_1_INP/ADC_11
COMP_2_INP/ADC_12/OP-AMP_1+
ADC_7/COMP_2_INM
ADC_5
ADC_1/DIFF_ADC_1+
ADC_2/DIFF_ADC_1-/OP-AMP_2+
ADC_3/DIFF_ADC_2+/OP-AMP_2_OUT/COMP_1_NM
ADC_6/OP-AMP_1-
COMP_3_INP
2.2uF
VDDA
BAT41KFILM
R15
D10
PWM_2
PWM_4
PWM_6
PWM_8
GPIO_7/DAC_3/OP-AMP_1_OUT
GPIO_9/EEV_3/SPI_MISO
ADC_1/DIFF_ADC_1+
A_GND
VDDA
BAT754
27B
28B
BAT754
100
R16
DC Vout Monitor
+3.3V_iso
GPIO_6/DAC_2/SPI_SCLK
TP11
R290
270
A_GND
21B
22A
1
1
R340
VDS_SR2 sensing
FAN_PWM
TP15
L2
8A
10pF
GPIO_2/COMP_2_OUT/GP_PWM_2
GPIO_4/EEV_1
GPIO_8/EEV_2
D13
29B
27B
5A 5B
A_GND
VDDA
17B
18A
R17
1
1
1
1
R350
BAT41/BAS70
3A
3A
VDDA
VDS_SR1 sensing
A_GND
2
CAN_RX
SD/OD_4
26B
29B
Temperature sensing
ADC_5
PWM_6
30A
32A
VDS_SR2
DC Output Current
DC Output Current sensing
PWM_FB_HS2
18A 18B
R300
2
GPIO_1/COMP_3_OUT/GP_PWM_1/EEV_4
1
1
VDS_SR2 sensing
5B
6A
11B
12A
R44100
15B
16A
R420
2
100nF
C17
1A
26B
TP6
1
1
1
Temperature
12A 12B
VDDA
2.2uF
USART_RX_iso
19A 19B
47nF
100nF
Digital Power Connector
ADC_4/DIFF_ADC_2-/OP-AMP_2-
ADC_2/DIFF_ADC_1-/OP-AMP_2+
ADC_3/DIFF_ADC_2+/OP-AMP_2_OUT/COMP_1_NM
2B
+
PWM_FB_LS2
BAT754
1
1
PWM_10
PWM_12
GPIO_3/COMP_1_OUT/FAULT_2GPIO_2/COMP_2_OUT/GP_PWM_2
GPIO_4/EEV_1
GPIO_5/DAC_1/COMP_4_INP/SPI_NSS
GPIO_8/EEV_2
SD/OD_3
14B
15A
1
1
VDDA
DC Vout Monitor sensing
1
1
R320
D20
C25
BAT754
1
1
31A
16A 16B
1A
GND
ADC_6/OP-AMP_1-
COMP_2_INP/ADC_12/OP-AMP_1+
ADC_7/COMP_2_INM
19B
20A
20A 20B
470nF
VDDA
A_GND
PWM_3
R220
PWM_SR_HS2
Resonance Current sensing
2B
PWM_SR_LS1
DC Bus Monitor
VDS_SR1 R18
ADC_8
BAT41/BAS70
100nF
BAT754
SMBus_SMBA/SPI_MOSI
TP5
TP7
FAULT_1
PWM_1
R250
+
ADC_8
ADC_9
ADC_10
C137
PWM_4
1
1
100
32B
31A
4A 4B
D11
+3.3V
23B
24A
+3.3V
3B 3B
DC Bus Monitor sensing
C16
PWM_3
PWM_5
PWM_7
PWM_9
PWM_11
PWM_SR_LS2
PWM_SR_HS1
C24
C20
10A
R38100
GPIO_10/DAC_4
A_GND
COMP_1_INP/ADC_11
COMP_3_INP
26A
27A
13B
14A
R280
6A 6B 6B
C18
STEVAL-DPSLLCK1
STEVAL-DPSLLCK1 schematics
DB3560 - Rev 2 page 3/7
Figure 4. STEVAL-DPSLLCP1 power board - mechanical parts
ZCL6
Clips TO220
ZISO2
ZCL11
Clips TO220
ZCL9
Clips TO220
ZCL7 ZCL13ZCL12
Clips TO220
ZCL10
Clips TO220Clips TO220
Clips TO247
ZCL3 ZCL4
Clips TO247 Clips TO220
ZCL2
Clips TO247
ZCL8
Clips TO220
ZCL5
ZISO1
Clips TO247
ZCL1
Clips TO220
ZW18
ZW15
1
1
ZSQ1
1
conic head screw M 3X8mm
1
ZGR1
1
1
ZA2T5 ZA2T6 ZA2T7
ZS14
1
1
ZW13
1
FAN ASSEMBLY PARTS
1
ZW17
1
1
1
BRACKET UNIVERSAL .420X.343"
1
1
Stainless Steel Plain Washer, 0. 5mm Thickness, M3, 304, A2
ZWA16 ZWA17 ZWA18 ZWA19
1
THI S LENGTH I S
MANDATORY
1
1
ZS17
ZS15
1
1
Plain Stainless Steel Internal Tooth Locking & Anti-Vibration Washer, M3, 316, A4
Plain Stainless Steel Internal Tooth Locking & Anti-Vibration Washer, M3, 316, A4
1
1
ZA2T1 ZA2T2 ZA2T3 ZA2T4
1
ZSQ2
ZW19
1
ZS13
1
ZS16
ZSQ3
1
1
1
ZS18
1
ZW14
1
1
ZS19
1
ZW16
1
ZGR2
Stainless Steel Plain Washer, 0. 5mm Thickness, M3, 304, A2
ZWA13 ZWA14 ZWA15
1
conic head screw M3X6mm
1
11
ZALU1
1
ZT6
1
ZT12
ZS23
1
1
ZT14 ZT15 ZT16
ZW10
1
ZW8
ZS22
ALUMINIUM ASSEMBLY PARTS
1
1
ZS8
1
1
1
ZS24
1
ZS10
11
1
1
1
ZA2T14
1
Surface: Nickel plated
ZS6
ZT8 ZT9 ZT10
ZS21
1
Surface: Nickel plated
1
Plain Stainless Steel Internal Tooth Locking & Anti-Vibration Washer, M3, 316, A4
conic head screw M3X6mm
ZS9
1
1
ZT7
1
1
ZS7
1
ZW11
1
ZS12
1
1
1
ZT17
1
ZW9
1
ZW12
ZS20
1
1
1
ZW7
1
1
ZT11
11
1
1
ZW6
ZS11
ZWA7 ZWA8 ZWA9 ZWA6 ZWA10 ZWA11 ZWA12
Stainless Steel Plain Washer, 0.5mm Thickness, M3, 304, A2
1
ZT13
ZA2T8 ZA2T9 ZA2T10 ZA2T11 ZA2T12 Z A2T13
Aluminium_365X140mm
1
1
conic head screw M 3X8mm
ZWA1 ZWA2 ZWA3
1
ZT4
1
1
ZWA4 ZWA5
ZW1
Brass_Spacer Stud_metric_ internal/internal WA-SBrII
ZS4 ZS5
1
1
1
1
1
Plain Stainless Steel Internal Tooth Locking & Anti-Vibration Washer, M3, 316, A4
1
Plexiglass_280X130mm
1
ZPLEX1
1
ZW3
1
Plain Stainless Steel Internal Tooth Locking & Anti-Vibration Washer, M3, 316, A4
ZS1 ZS2 ZS3
1
ZW4 ZW5
1
1
ZT2
Stainless Steel Spacer Studs, metric, internal/external W A-SSSIE
Stainless Steel Plain Washer, 0. 5mm Thickness, M3, 304, A2
conic head screw M 3X6mm
ZT3
1 1
Stainless Steel Plain Washer, 0. 5mm Thickness, M3, 304, A2
ZT5
1
1
1
ZW2
1
ZT1
PLEXIGLASS ASSEMBLY PARTS
Figure 5. STEVAL-DPS334C1 control board - MCU and connector schematic
C5
A_GND
TP15
R24
10
29
PB11
30
PC3
11
PA15
A_GND
TP36
R16
I2C1_SCL/USART3_RX/CAN_RX
100pF
R35
8
X1
PA14 49
+3.3V
10uFC16
1
TP13
R28
10
HRTIM_CHA1
ADC2_IN5
HRTIM_CHD2
ADC2_IN12
22pF
DAC2_OUT1
PC7 38
U5
PC13
HRTIM_EEV7/SPI1_MISO
3
0
PWM_1
+3.3V
TP8
10 ADC2_IN11/OPAMP2_VINM
GND
5
ADC1_IN4
HRTIM_CHE1
PWM_5
HRTIM_EEV1
NRST
VOUT
3
VIN
I/O 3 4
C27
ADC2_IN5
+5V
To pull-up when used for SMBus communication
I/O 4
6REF3
Digital Power Connector pinout assignment for STM32F334R8T6 MCU
Jumper
+5V
I2C1_SCL/USART3_RX/CAN_RX
7
42
PA10
PWM_12
DAC1_OUT2/SPI1_SCLK
HRTIM_CHB1
PA1
PB6 58
4.7k
TP14
A_GND
PA8 41
44
PA12
ADC12_IN7
J6
1
TP28
R23
COMP4_OUT/TIM3_CH4
HRTIM_EEV1
TP25
COMP6_OUT/TIM3_CH1/TIM1_CH3N/HRTIM_EEV10
10K
48
I/O 3 4
GND
C23
PC10
552
COMP4_INP/ADC1_IN11/OPAMP2_VIN P 6
PB10
100pF
GND
VDD_4
PC4
24
2
I2C1_SDA/USART3_TX/CAN_TX
22pF
D2
TP11
+3.3V
GND
VDDA
34
PB14
100nF
R34
I2C1_SMBA/SPI1_MOSI
C15
PF0/OSC-IN
6
TP20
HRTIM_FLT5
C32
HRTIM_CHB1
OSC-IN
R17
FAULT_LED
COMP_1_INP/ADC_11
+
TP32
C11
2
C20
10
PWM_8
USART1_TX
SMBus_SDA/UI_USART_TX
CAN_RX
ADC1_IN3
4.7k
I/O 1 2
2
100nF
PF1/OSC-OUT
7
20
PA5
1
15
STM32F334R8T6 (LQFP64)
PA2
2
C19
TP16
R15
STATUS_LED
ADC12_IN6 NRST
A_GND
PB7
COMP6_INP
PB13
Red LED
R29
10
100nF
50
PB0 54
10
I/O 1 2
TP5
0
R37
C7
GND
TP2
R19
VDDA/VREF+
Green LED
2
ADC1_IN1
HRTIM_CHE2
COMP_2_INP/ADC_12/OP-AMP_1+
ADC_8
GND
GND
C22
PC8
19
R25
10
HRTIM_SCOUT
HRTIM_EEV2
1
ADC1_IN1
5
1
6
HRTIM_CHC2
OSC-OUT
SWCLK
PWM_4
TP33
I/O 4
6REF3
PA6
3
Note: Keep ADC traces as short as
possible to connector P1
ANALOG INPUT FILTERS
VOLTAGE REGULATOR
GPIO_5/DAC_1/COMP_4_INP/SPI_NSS
10 HRTIM Outputs on STM32F334
C18
TIM3_ETR
TP4
USART1_TX
REF2
PWM_11
+3.3V
GND
TP19
I/O 3 4
+3.3V
DAC1_OUT2/SPI1_SCLK 2
DA108S1
5REF4
COMP2_INP/ADC2_IN4
3
VDDA
VDDA
10
100nF
VDD_1 64
GPIO_2/COMP_2_OUT/GP_PWM_2
VBAT
I/O 2 3
1
TP12
DA3
+3.3V
51
PC11
100uF
A_GND
VDDA
PC2
10
I2C1_SDA/USART3_TX/CAN_TX
GND
PWM_2
1
2
A_GND
2
ADC12_IN6
VSS_3
TP31
R210
TP26
R26
10
VDDA
MCU_USART_TX
100pF
HRTIM_CHE2
TP10
HRTIM_CHA2
100pF
HRTIM_CHE1
100pF
R22
10
2
ADC_6/OP-AMP_1-
HRTIM_EEV2
10
100pF
TP9
ADC1_IN3
PWM_7
DA108S1
A_GND
SMBus_SMBA/SPI_MOSI
8REF1
HRTIM_CHC1
ADC12_IN8
2
100pF
J5
1
GND
16
GND CON
Stripline male 2x1 2.54mm
PA3
TP22
ADC12_IN7
Blue LED
100pF
LD1117
1
GND
EXT SUPPLY
I2C1_SCL/USART3_RX/CAN_RX
REF3
7
59
PB8
TP29
C29
PB1
7
PB12 33
GND
47
VSS_2
31
GND
100pF
TP1
1
470nF
32 VDD_2
TP23
100pF
SWCLK
TP3
R33
+3.3V
ADC_7/COMP_2_INM
ADC_9
100
VSS_4
18
52
PC12 53
HRTIM_EEV7/SPI1_MISO
+3.3V
R32
10
GND
TP35
REF4
8REF1
J7
TP6
SWDIO
TP37
ADC_1/DIFF_ADC_1+
ADC_2/DIFF_ADC_1-/OP-AMP_2+
ADC_3/DIFF_ADC_2+/OP-AMP_2_OUT/COMP_1_NM
C30
100pF
2
100nF
7REF2
I/O 4
6
1.5 Ohm 215 mA
C31
J3
61
PB9
MCU_USART_RX
I2C1_SDA/USART3_TX/CAN_TX
USART1_RX
ADC1_IN2
TP27
U4
PWM_10
I/O 2 3
C10100nF
C28
7
GND
TP17
R36
VSS_1
DAC1_OUT1/SPI1_NSS
22
PA7
23
DA2
8MHz HC49/US
ADC1_IN4
C26
1
A_GND
28
PB3
COMP4_OUT/TIM3_CH4 2
SWD - USER COMMUNICATION
COMP_3_INP
PC13
8PC0
GND
1
PWM_3
C12
C25
C13
REF1 1
PC1
9
A_GND
I2C1_SDA/USART3_TX/CAN_TX
1
36
45
PA13 46
PB4
PC6 37
+3.3V
GPIO_6/DAC_2/SPI_SCLK
GPIO_7/DAC_3/OP-AMP_1_OUT
GPIO_8/EEV_2
GPIO_9/EEV_3/SPI_MISO
GPIO_10/DAC_4
HRTIM_CHA2
COMP2_OUT/HRTIM_FLT1
COMP2_OUT/HRTIM_FLT1
TIM2_ETR
A_GND
39
PC9 40
SWDIO
DAC1_OUT1/SPI1_NSS
DAC2_OUT1
4
R18
C17
ADC_10
HRTIM_CHD1
100pF
R27
100uF
R31
2
SWD/COM
R30
10
HRTIM_CHD2
PWM_6
TP24
DA1
I2C1_SMBA/SPI1_MOSI
HRTIM_CHA1
5REF4
C24
HRTIM_CHB2
TP18
FAULT_LED
C14
I/O 2 3
+
+5V
PC14/OSC32_IN
4
C8
4th DAC channel not available
100nF
U3
ADC12_IN8
A_GND
GND
+3.3V
A_VDD
I2C1_SMBA
SMBus_SCL/UI_USART_RX
43
PA11
COMP4_INP/ADC1_IN11/OPAMP2_VINP
HRTIM_CHB2
REF2
GPIO_1/COMP_3_OUT/GP_PWM_1/EEV_4
56
PB5 57
I/O 1 2
A_GND
+5V
VDDA
STATUS_LED
D3
86
PB2
PA9
12 VSSA/VREF-
100nF
COMP6_INP
C9
TIM2_CH3
HRTIM_CHD1
+3.3V
17
PA4
VDD_3
HRTIM_FLT5
HRTIM_CHC2
GND
D1
10
PC5
5
C6
TP21
C33
PD2
L1
PC15/OSC32_OUT
5
GND
J4
100nF
TP34
35
PB15
10
C21
ADC2_IN12
ADC1_IN2
HRTIM_CHC1
TP7
100pF
PC13
COMP6_OUT/TIM3_CH1/TIM1_CH3N/HRTIM_EEV10
10nF
1
+
COMP2_INP/ADC2_IN4
ADC2_IN11/OPAMP2_VINM 2
GND
9
CAN_TX
NRST
PA0
14
DA108S1
ADC_5
PWM_9
8
13
63
GND
ADC_4/DIFF_ADC_2-/OP-AMP_2-
BAR43S
USART1_RX
2
1
I2C1_SCL/USART3_RX/CAN_RX
R200
FAULT_1
GPIO_3/COMP_1_OUT/FAULT_2
GPIO_4/EEV_1
62
VDDA
60
BOOT0
TP30
GND
25B
7A
7A
GPIO_6/DAC_2/SPI_SCLK
GPIO_8/EEV_2
GPIO_10/DAC_4
+5V
14B
15A
26A
27A
31A
21B
22A
18B
19A
9B
4A 4B
GND
20A 20B
27A
28A
Digital Power Connector
25A 25B
GND_iso
GPIO_1/COMP_3_OUT/GP_PWM_1/EEV_4
PWM_10
PWM_12
GPIO_3/COMP_1_OUT/FAULT_2
19A 19B
USART_TX_iso
28A
29A
CAN_TX
SMBus_SCL/UI_USART_RX
SMBus_SDA/UI_USART_TX
2B
15B
16A
ADC_7/COMP_2_INM
GND
7B 7B
P1
23B
24A
9B
10A
4A
23A 23B
17B
18A
+3.3V_iso
29A
30A 31B
32B
6A 6B 6B
22B
23A
GPIO_7/DAC_3/OP-AMP_1_OUT
GPIO_9/EEV_3/SPI_MISO
ADC_1/DIFF_ADC_1+
10A 10B
2A
2A
12A 12B
26B
3B 3B
24A 24B
18A 18B
30A
32A
17A 17B
+3.3V
USART_RX_iso
ADC_2/DIFF_ADC_1-/OP-AMP_2+
ADC_3/DIFF_ADC_2+/OP-AMP_2_OUT/COMP_1_NM
15A 15B
A_GND
10B
11A
FAULT_1
PWM_1
2B
1A
1A
16A 16B
28B
30B
11A 11B
26B
29B
8A
8A
20B
21A
13A 13B
5B
6A
SMBus_SMBA/SPI_MOSI
24B
25A
32A 31B
14A 14B
3A
COMP_1_INP/ADC_11
COMP_3_INP
22A 22B
30B
26A 27B
28B
32B
31A
19B
20A
5B
11B
12A
A_VDD
8B 8B
12B
13A
1B 1B
ADC_4/DIFF_ADC_2-/OP-AMP_2-
ADC_5
ADC_6/OP-AMP_1-
COMP_2_INP/ADC_12/OP-AMP_1+
ADC_8
ADC_9
ADC_10
PWM_2
PWM_4
PWM_6
PWM_8
CAN_RX
PWM_3
PWM_5
PWM_7
PWM_9
13B
14A
3A
21A 21B
GPIO_4/EEV_1
GPIO_5/DAC_1/COMP_4_INP/SPI_NSS
29B
27B
4B
5A
5A
PWM_11
GPIO_2/COMP_2_OUT/GP_PWM_2
9A
9A
16B
17A
STEVAL-DPSLLCK1
STEVAL-DPSLLCK1 schematics
DB3560 - Rev 2 page 4/7
Figure 6. STEVAL-DPS334C1 control board - opto-isolated communication schematic
5
TO PLACE ON THE RIGHT AND ON THE LEFT SIDE OF THE BOARD RESPECTIVELY
U2
MCU_USART_RX
USART_RX_iso
15pF
R3
USART_TX_iso
6
GND
R10820
J1 J2
SHIELD
0 N.M
R447
GND_iso
100nF
0
R5
C3
GND
0 N.M.
R6
+3.3V_iso
R12
1
6
+3.3V_iso
SHIELD
7
GND_iso
0 N.M.
R1147
GND
USART_RX_iso
OPTOCOUPLERS
CONNECTION BETWEEN TWO CONTROL BOARDS
820R2
GND
0 N.M
C2
15pF
MCU_USART_RX
7
USART_CON
8
R13
1
2
3
4
MCU_USART_TX
C4
3
2
USART_RX_iso
1
C1
4
+3.3V_iso
8
100nF
R1
0
R939
R14
5
GND_iso
0
R7
USART_RX_iso
PS9821
GND
39
MCU_USART_RX
GND_iso
GND_iso
0
+3.3V
GND
+3.3V
4
+3.3V_iso
MCU_USART_TX
MCU_USART_TX
GND_iso
USART_TX_iso
USART_TX_iso
1
2
3
4
USART_CON
PS9821
+3.3V
USART_TX_iso
2
3
U1
R8
Figure 7. STEVAL-DPSADP01 adapter board schematic
2
4
6
8
1
JTDI_JTAG_ADP
JTMS_ADP
R3
100nF 25V
P1
T1OUT 14
11
19
17
T1IN
GND
JP_JTDI
100nF
J3
I2C_SMBA
GND
J1
I2C_SMBA
2
C&K KMR221GLFS
Farnell: 1201424
JTDO_ADP
DB9-Female
SG
Jtag conn.
3
GND
11
+3.3V
CAN_RX
C2-
5
3
1
JTMS_ADP
100nF 25V
1
RESET#_BTN
10
1
R2OUT
C7
JTAG
RESET BUTTON
4
I2C_SCL/USART_RX/CAN_RXI2C_SDA/USART_TX/CAN_TX
3
GND
C2+
4
2x stripline male 3+1 2.54mm
pin 4 can be connected with pin 1, 2 or 3 with a jumper
1
6
2
7
3
8
4
9
5
+3.3V
GND
4
R5
0
V+
2
R
4
1
USART_RX
R2
2
USART_TX
120
6
CANL
GND
3C1-
GND
+3.3V
9
10k
GND
DB9-Male
5
NC1
+3.3V
J9
4.7k
CAN_RX
1
3
5
7
9
CAN_TX
I2C_SDA/USART_TX/CAN_TX
R4
100nF 25V
U1
J7
+3.3V
20
RESET#_ADP
T2IN 10
7
CANH
R1
SMBUS_SDA
S1
RST
C & K
KMR221GLFS
100nF 25V
C3
J2
10
2
3
+3.3V
place reset button in the external part of the board
N.M.
15
C8
Digikey
401-1427-1-ND
JTCK_ADP
U2
9
2
C5
6
NC 8
P2
18
C+
1
4
12
R1OUT
+3.3V
CAN_TX
1
SWD/COM
J8
7
JTCK_ADP
R6
ST3232CTR
GND
SMBUS_SCL
USART_RX
1
R1IN 13
GND
2
GND 15
SN65HVD232D
C6
5
RESET#_ADP
SMBUS_SDA
RESET#_BTN
7
14
16
100nF 25V
C4
8
+3.3V
2
GND
SMBUS
Stripline male 3x2 2.54mm
C1
USER COMMUNICATION CONFIG
RS:461-9771
GND
CAN COMMUNICATION
+3.3V
GND
GND
D
1
8R2IN
0
Male Connector 2x10
Pitch 2.54 mm
Tyco Electronics 2 -1634688-0
RS: 473-8282
Farnell: 8395942
TD
RD
J10 as close as possible to j12 pin 10
12
VCC
3
V-
6
4.7k
I2C_SCL/USART_RX/CAN_RX
T2OUT
VCC 16
5
2
GND
4
CAN
RS-232
USART_TX
SERIAL COMMUNICATION
11
13
C2
J6
100nF 25V
6
100nF 16V
1
6
2
7
3
8
4
9
5
GND
SMBUS_SCL
SWD - USER COMMUNICATION
STEVAL-DPSLLCK1
STEVAL-DPSLLCK1 schematics
DB3560 - Rev 2 page 5/7
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service
names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2019 STMicroelectronics – All rights reserved
STEVAL-DPSLLCK1
DB3560 - Rev 2 page 7/7
