Stop torque: > 10 Ncm. (14 in-oz)
Torque: 0.5 to 2.5 Ncm.
(0.7 to 3.4 in-oz)
Electrical rotation angle: 240° ± 20°
Mechanical rotation angle: 265° ± 5°
Nominal Power:
 50°C (122°F) 0.25W (lin), 0.12W (no lin) carbon
 70°C (158°F) 0.5W (lin) 0.25W (no lin.)cermet
Based on the PT-15 / PTC-15 series.
Available in carbon (SM-15) and cermet (SMC-15).
Enclosed in plastic housing.
Excellent low price control potentiometer.
FEATURES
Operating temperature:
-25°C + 70°C(***) (-13°F + 158°F) carbon
-40°C + 90°C (-40 + 194°F) cermet
Power derating: 0 Watt a 100°C
Range of values*
Max. Voltage: 250 VDC (lin) 125 VDC (no lin)
Tolerance*: ± 20%
± 30%
SM/SMC-15
15 mm Carbon/
Cermet Potentiometer
NOTES: (1) Mounting Method: Positions with "P" will be with crimped terminals.
(2) 10 1
Number of zeros
Value:
2 first digits of the value.
Code:
Code eg.: +7
-5 07 05 negative tolerance
Tolerance (non standard). check
positive tolerance
(4) Shafts: These figures coincide with the PT15 references (Standard material).
(5) Colour: Only applicable to the shaft.
102
Value
H04
Mounting
Method
H04 H 2.5A
H14 H 5A
H12 H 2.5PA
H20 H 5 PA
H24 HC 5A
V02 V 12.5
V21 V 12.5P
V12 VA
V22 VA P
V15 V 15
V17 V17.5
H16 BA
H26 BB
H03 H 2.5B
H13 H 5B
H22 H 2.5PB
H30 H 5PB
H23 HC 5B
V23 V 15P
504 = 500 K
SM-15
Series
SM-15
(See note 1)
A
Taper
A = Linear
B = Log.
C = Alog.
(See note 2)
2020
505 = 5 M
102 = 1 K
Code
(Others
on request)
=
(3)
 Standard values: Decades of 10, 20, 22, 25, 47, 50. Other values check
This way of ordering should be used for options which are not included
in the "How to order" standard and optional extras.
STANDARD OPTIONS
HOW TO ORDER CUSTOM DRAWING
SM-15 H04 (Max. 16 digits)
+ DRAWING NUMBER
Cut track
Shaft
Shaft colour
Nut and washer
Non cut track
Fig. 9
Black
Without nut & washer
NOTE: The information contained here should be used for reference purposes only.
Mechanical life***: 10K cycles
www.piher.net
IP54 protection according to IEC 60529.
* Check availability.
** Other tapers: check availability. .
66
(See note 3)
2020 = + 20%
3030 = + 30%
Tolerance
*** Up to 85°C depending on application.
**** For Ohmic values Lower values: check availability.
Taper** : Lin., Log., Alog.
S
MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS
HOW TO ORDER SM-15
Residual resistance*:
Shafts
02 = Fig.2
06 = Fig.6
07 = Fig.7
08 = Fig.8
10 = Fig.10
11 = Fig.11
12 = Fig.12
17 = Fig.17
21 = Fig.21
Shaft Colour
RO
VE
AM
AZ
IN
MA
GR
NA
CR
Red
Green
Yellow
Blue
Natural
Brown
Grey
Orange
Cream
=
=
=
=
=
=
=
=
=
Nut and Washer
TA
MTA
T
MT
= Loose nut
and washer
Assembled nut
and washer
Loose nut
Assembled nut
(See note 4) (See note 5)
=
=
=
PCI = Initial
PCF= Final
Cut track
OPTIONAL EXTRAS
www.piher.net
102H04 A
Shafts
02 = Fig.2
06 = Fig.6
07 = Fig.7
08 = Fig.8
10 = Fig.10
11 = Fig.11
12 = Fig.12
17 = Fig.17
21 = Fig.21
(See note 4)
Mounting
Method
H04 H 2.5A
H14 H 5A
H12 H 2.5PA
H20 H 5PA
H34 HA 5A
V02 V 12.5
V21 V 12.5P
V12 VA
V22 VA P
V15 V 15
V17 V 17.5
H16 BA
H26 BB
H03 H 2.5B
H13 H 5B
H22 H 2.5PB
H30 H 5PB
H33 HA 5B
V23 V 15P
(See note 1)
Code
SMC-15
Series
SMC-15
Value
504 = 500 K
(See note 2)
505 = 5 M
102 = 1 K
Taper
A = Linear
B = Log.
C = Alog.
(Other tapers
on request)
This way of ordering should be used for options which are not included
in the "How to order" standard and optional extras.
SMC-15 H04 (Max. 16 digits)
+ DRAWING NUMBER
000 = C M
NOTES: (1) Mounting Method: Positions with "P" are with crimped terminals.
(2) 10 1
Number of zeros
Value:
2 first digits of the value.
Code:
(4) Shafts: The figures coincide with the numbers for PT15. (Standard material).
(5) Colour: Only applicable to the shaft.
positive tolerance
Code eg.: +7
-5
07 05 negative tolerance
Tolerance (non standard). check =
(3)
 Standard values: Decades of 10, 20, 22, 25, 47, 50. Other values: check for availability.
 000 = CM = Switch 45° (see PTC-15).
FIG. A B C D Ref.
2
9
10
11
19
35
37.8
35
9
9
9
25
15
31
33.8
15
6
6
6
6
5214M*
5216
5218
5209
Slot 1 x 2 is on line with
wiper rotor mod. N.
6
7
8
12
15
16.8
25.3
46
9
9
9
5
6
6
6
6
Solid model shafts
Slot (1 x 1.4) perpen to wiper position
Fig. 12 slot is on line with wiper pos.
Hollow model shafts
Ref.FIG. A B D
SHAFTS
5219
5220
5207
5227
* Black colour only. Check
for availability.
STANDARD OPTIONS
Shaft
Shaft colour
Nut and washer
Fig. 9
Black
Without nut
and washer
Life 10K cycles
HOW TO ORDER SMC-15
OPTIONAL EXTRAS
67
(See note 3)
Tolerance
1010 = ± 10%
2020 = ± 20%
3030 = ± 30%
HOW TO ORDER CUSTOM DRAWING
2020
Nut and Washer
TA
MTA
T
MT
=
=
=
=
Loose nut and washer
Assembled nut and washer
Loose nut
Assembled nut
Shaft Colour
RO
VE
AM
AZ
IN
MA
GR
NA
CR
Red
Green
Yellow
Blue
Natural
Brown
Grey
Orange
Cream
=
=
=
=
=
=
=
=
=
(See note 5)
2
A
B
C3.7
Ø D
+ 0.05
- 0
1 x 1.4
Ø D
A
B
Fig. 17 - 5210
23.1
Ø 5.9
Fig. 20 * - 5369 (E)Fig. 19 * - 6032
Ø6
28
15
28.7
Ø6
10.7
36
o
4,6
4,1
For rotor
mod. G
Ø6.1
Ø 6
42
o
4.6
Fig. 25 * - 6059
26
Fig. 21- 6031
(*) Only available under drawing.
37.8
Ø 6
NOTE:
The length of the shaft size «A»
will be shorter 2.5 mm. after it is mounted.
P
I
H
E
R
S
P
A
I
N
Mounting surface.
A= Initial
S= Wiper
E= Final
COMMON DIMENSIONS
Ø 6
L = A - (2.5) ± 0.5
AS E
4
0.8
0.5
- 0.1
- 0
1
Ø 16.7
M10x0.75
98
5.85
7.5
2.5
15
ø 13
www.piher.net
h 2.5
h 5
v 12.5
va 12.5
v 15
v 17.5
E
A
S
QUANTITY: 100 units
PACKAGING
TERMINAL STYLES
68
SNAP IN TERMINAL
P
2
0.9
BØ 1.3
AS
P
I
H
E
R
S
P
A
I
N
18.35
E
10
4.4 4.4
S
4.5 4
S
3.5 4
(b) (a)
8.8
44
(a)(b)
h C 5
Only SM-15 Ø 1.3
10
55
(a)(b)
AS
P
I
H
E
R
S
P
A
I
N
20.85
E
12.5
5 5
S
3.5 5
S
3.5 5
(b) (a)
h A 5
AS
P
I
H
E
R
S
P
A
I
N
20.35
E
12
5 5
Only SMC-15
Ø 1.3
10
55
(a)(b)
S
3.5 5
S
3.5 5
(b) (a)
Ø 1.3
AS
P
I
H
E
R
S
P
A
I
N
18.35
E
10
5 5
S
62.5
S
3.5 2.5
(b) (a)
10
2.52.5
(a)(b)
Ø 1.3
AS
P
I
H
E
R
S
P
A
I
N
18.35
E
10
5 5
S
3.5 5
S
3.5 5
(b) (a)
10
55
(a)(b)
55 10
7.5 5
12.5
Ø 1.3
10 55 10
7.5 7.5
15
Ø 1.3
10
55 11.5
7.5 5
12.5
Ø 1.3
10 55 10
10 7.5
17.5
Ø 1.3
10
www.piher.net
v121115
RECOMMENDED CONNECTIONS
Information contained in and/or attached to this catalogue may be subject to export control regulations of the European Community, USA, or other countries. Each recipient of this document is responsible to ensure
that usage and/or transfer of any information contained in this document complies with all relevant export control regulations. If you are in any doubt about the export control restrictions that apply to this information,
please contact the sender immediately. For any Piher Exports, Note: All products / technologies are EAR99 Classified commodities. Exports from the United States are in accordance with the Export Administration
Regulations. Diversion contrary to US law is prohibited.
Piher potentiometers recommended
connection circuit for a position sensor or
control application.
(voltage divider circuit electronic design).
Disclaimer
The product information in this catalogue is for reference purposes. Please consult for the most up to date and accurate design information.
Piher Sensors & Controls S.A., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Piher), disclaim any and all liability
for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product described herein.
Piher disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum
extent permitted by law. The product specifications do not expand or otherwise modify Pihers terms and conditions of sale, including but not limited to the
warranty expressed therein, which apply to these products.
No licence, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Piher.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers
using or selling Piher products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Piher for any
damages arising or resulting from such use or sale. Please contact authorised Piher personnel to obtain written terms and conditions regarding products
designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
All Piher products can be adapted to meet customer´s requirements.
Please always use the latest updated datasheets published at our website www.piher.net.
RAD
RL
RL 100 x R
VCC
C
Noise filter.
Ground.
E
A
S
ISO 14001
BUREAU VERITAS
Certification
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Piher:
SM15V15-103A2020-2-TA SM15H24-103A2020-08VE-MTA