NJM78L00
-1-
Ver.2006-10-20
3-TERMINAL POSITIVE VOLTAGE REGULATOR
■ GENERAL DESCRIPTION ■ PACKAGE OUTLINE
The NJM78L00 series of 3-Terminal Positive Voltage Regulators
is constructed using the New JRC Planar epitaxial process. These
regulators employ internal current-limiting and thermal-shutdown,
making them essentially indestructible. If adequate heat sinking is
provided, they can deliver up to 100mA output current. They are
intended as fixed voltage regulators in a wide range of applications
including local or on-card regulation for elimination of noise and
distribution problems associated with single-point regulation. In
addition, they can be used with power pass elements to make
high-current voltage regulators. The NJM78L00 series used as a
Zener diode/resistor combination replacement, offers an effective
output impedance improvement of typically two orders of
magnitude, along with lower quiescent current and lower noise.
■ FEATURES
● Internal Short Circuit Current Limit
● Internal Thermal Overload Protection
● Excellent Ripple Rejection
● Guarantee’d 100mA Output Current
● Package Outline TO-92-L2, SOT-89, EMP8
● Bipolar Technology
■ PIN CONFIGURATION
■ EQUIVALENT CIRCUIT
(EMP8)
(SOT-89)
NJM78L00L2A NJM78L00UA
(TO-92-L2)
NJM78L00L2
NJM78L00UA
PIN CONFIGURATION
1. OUT
2. GND
3. IN
PIN CONFIGURATION
1. OUT
2. GND
3. GND
4. NC
5. NC
6. GND
7. GND
8. IN
5
NJM78L00EA
(5V, 9V, 12V Version Only)
NJM78L00EA