AON6754 30V N-Channel AlphaMOS General Description Product Summary * Latest Trench Power AlphaMOS (MOS LV) technology * Integrated Schottky Diode (SRFET) * Very Low RDS(on) at 4.5VGS * Low Gate Charge * High Current Capability * RoHS and Halogen-Free Compliant Application 30V 85A RDS(ON) (at VGS=10V) < 1.8m RDS(ON) (at VGS = 4.5V) < 3.3m 100% UIS Tested 100% Rg Tested * DC/DC Converters in Computing, Servers, and POL * Isolated DC/DC Converters in Telecom and Industrial DFN5X6 Top View VDS ID (at VGS=10V) D Top View Bottom View 1 8 2 7 3 6 4 5 SRFETTM Soft Recovery MOSFET: Integrated Schottky Diode G S PIN1 Absolute Maximum Ratings TA=25C unless otherwise noted Parameter Symbol Drain-Source Voltage VDS Gate-Source Voltage VGS TC=25C Continuous Drain Current G Pulsed Drain Current Continuous Drain Current C V A 329 52 IDSM TA=70C 20 66 IDM TA=25C Units V 85 ID TC=100C Maximum 30 A 42 Avalanche Current C IAS 65 A Avalanche energy L=0.05mH C EAS 106 mJ VDS Spike VSPIKE 36 V Power Dissipation B 100ns TC=25C PD TC=100C TA=25C Power Dissipation A Junction and Storage Temperature Range Rev1: Mar 2012 7.3 Steady-State Steady-State RJA RJC W 4.7 TJ, TSTG Symbol t 10s W 33 PDSM TA=70C Thermal Characteristics Parameter Maximum Junction-to-Ambient A Maximum Junction-to-Ambient A D Maximum Junction-to-Case 83 -55 to 150 Typ 14 40 1.1 www.aosmd.com C Max 17 55 1.5 Units C/W C/W C/W Page 1 of 6 AON6754 Electrical Characteristics (TJ=25C unless otherwise noted) Symbol Parameter STATIC PARAMETERS BVDSS Drain-Source Breakdown Voltage IDSS Zero Gate Voltage Drain Current Conditions Min ID=10mA, VGS=0V Gate-Body leakage current VDS=0V, VGS= 20V Gate Threshold Voltage VDS=VGS, ID=250A RDS(ON) Static Drain-Source On-Resistance 100 1.4 VGS=10V, ID=20A TJ=125C VGS=4.5V, ID=20A gFS Forward Transconductance VDS=5V, ID=20A VSD Diode Forward Voltage IS=1A,VGS=0V IS Maximum Body-Diode Continuous CurrentG Output Capacitance Crss Reverse Transfer Capacitance Rg Gate resistance Qgs Gate Source Charge Qgd tD(on) nA 2.4 V 1.5 1.8 2.1 2.6 2.1 3.3 VGS=10V, VDS=15V, ID=20A 0.7 m m S 0.6 V 85 A 2796 VGS=0V, VDS=0V, f=1MHz mA 100 90 VGS=0V, VDS=15V, f=1MHz SWITCHING PARAMETERS Qg(10V) Total Gate Charge Qg(4.5V) Total Gate Charge 1.7 0.39 DYNAMIC PARAMETERS Ciss Input Capacitance Units V 0.5 TJ=125C IGSS Max 30 VDS=30V, VGS=0V VGS(th) Coss Typ pF 1200 pF 165 pF 1.5 2.3 46.8 64 nC 22.3 30 nC 8.4 nC Gate Drain Charge 8.6 nC Turn-On DelayTime 9.5 ns tr Turn-On Rise Time tD(off) Turn-Off DelayTime 6.3 ns 35.8 ns tf Turn-Off Fall Time 12.3 ns trr Body Diode Reverse Recovery Time Qrr IF=20A, dI/dt=500A/s 20 Body Diode Reverse Recovery Charge IF=20A, dI/dt=500A/s 40 ns nC VGS=10V, VDS=15V, RL=0.75, RGEN=3 A. The value of RJA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA =25C. The Power dissipation PDSM is based on R JA and the maximum allowed junction temperature of 150C. The value in any given application depends on the user's specific board design. B. The power dissipation PD is based on TJ(MAX)=150C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used. C. Single pulse width limited by junction temperature TJ(MAX)=150C. D. The RJA is the sum of the thermal impedance from junction to case RJC and case to ambient. E. The static characteristics in Figures 1 to 6 are obtained using <300s pulses, duty cycle 0.5% max. F. These curves are based on the junction-to-case thermal impedance which is measured with the device mounted to a large heatsink, assuming a maximum junction temperature of TJ(MAX)=150C. The SOA curve provides a single pulse rating. G. The maximum current rating is package limited. H. These tests are performed with the device mounted on 1 in2 FR-4 board with 2oz. Copper, in a still air environment with TA=25C. THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE. Rev1: Mar 2012 www.aosmd.com Page 2 of 6 AON6754 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 100 100 4V VDS=5V 3.5V 80 80 4.5V 60 60 ID(A) ID (A) 10V 40 40 125C VGS=3V 20 20 25C 0 0 0 1 2 3 4 0 5 4 2 3 4 5 6 Normalized On-Resistance 1.6 3 RDS(ON) (m ) 1 VGS(Volts) Figure 2: Transfer Characteristics (Note E) VDS (Volts) Fig 1: On-Region Characteristics (Note E) VGS=4.5V 2 1 VGS=10V VGS=10V ID=20A 1.4 1.2 1 VGS=4.5V ID=20A 0.8 0 0 5 0 10 15 20 25 30 ID (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage (Note E) 25 50 75 100 125 150 175 Temperature (C) Figure 4: On-Resistance vs. Junction Temperature (Note E) 5 1.0E+01 ID=20A 125C 1.0E+00 4 125C IS (A) RDS(ON) (m ) 1.0E-01 3 1.0E-02 25C 2 1.0E-03 25C 1 1.0E-04 1.0E-05 0 2 6 8 10 VGS (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage (Note E) Rev1: Mar 2012 4 www.aosmd.com 0.0 0.2 0.4 0.6 0.8 1.0 VSD (Volts) Figure 6: Body-Diode Characteristics (Note E) Page 3 of 6 AON6754 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 10 4500 3500 Capacitance (pF) VGS (Volts) 4000 VDS=15V ID=20A 8 6 4 Ciss 3000 2500 2000 1500 Coss 1000 2 500 0 0 10 20 30 40 Qg (nC) Figure 7: Gate-Charge Characteristics 50 0 RDS(ON) 10s 10 15 20 VDS (Volts) Figure 8: Capacitance Characteristics 100s 10.0 1ms 10ms DC 1.0 TJ(Max)=150C TC=25C 0.1 400 10s Power (W) 100.0 5 25 500 1000.0 ID (Amps) Crss 0 TJ(Max)=150C TC=25C 17 5 2 10 300 200 100 0.0 0 0.01 0.1 1 VDS (Volts) 10 100 0.0001 0.001 0.01 0.1 1 10 0 Pulse Width (s) 18 Figure 10: Single Pulse Power Rating Junction-to-Case (Note F) Figure 9: Maximum Forward Biased Safe Operating Area (Note F) Z JC Normalized Transient Thermal Resistance 10 D=Ton/T TJ,PK=TC+PDM.ZJC.RJC 1 In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 40 RJC=1.5C/W PD 0.1 Single Pulse Ton T 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 100 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance (Note F) Rev1: Mar 2012 www.aosmd.com Page 4 of 6 AON6754 100 100 80 80 Current rating ID(A) Power Dissipation (W) TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 60 40 20 60 40 20 0 0 0 25 50 75 100 125 TCASE ( C) Figure 12: Power De-rating (Note F) 150 0 25 50 75 100 125 TCASE ( C) Figure 13: Current De-rating (Note F) 150 10000 TA=25C Power (W) 1000 100 10 1 0.00001 0.001 0.1 10 1000 Pulse Width (s) Figure 14: Single Pulse Power Rating Junction-to-Ambient (Note H) Z JA Normalized Transient Thermal Resistance 10 D=Ton/T TJ,PK=TA+PDM.ZJA.RJA 1 In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse RJA=55C/W 0.1 PD 0.01 Single Pulse Ton T 0.001 0.0001 0.001 0.01 0.1 1 10 100 1000 Pulse Width (s) Figure 15: Normalized Maximum Transient Thermal Impedance (Note H) Rev1: Mar 2012 www.aosmd.com Page 5 of 6 AON6754 Gate Charge Test Circuit & Waveform Vgs Qg 10V + + Vds VDC - Qgs Qgd VDC - DUT Vgs Ig Charge Resistive Switching Test Circuit & Waveforms RL Vds Vds 90% + Vdd DUT Vgs VDC - Rg 10% Vgs Vgs t d(on) tr t d(off) t on tf toff Unclamped Inductive Switching (UIS) Test Circuit & Waveforms L 2 E AR = 1/2 LIAR Vds BVDSS Vds Id + Vdd Vgs Vgs I AR VDC - Rg Id DUT Vgs Vgs Diode Recovery Test Circuit & Waveforms Q rr = - Idt Vds + DUT Vds Isd Vgs Ig Rev1: Mar 2012 Vgs L Isd + Vdd t rr dI/dt I RM Vdd VDC - IF Vds www.aosmd.com Page 6 of 6