GBU Package
Mechanical Data
Parameter Symbol GBU15J GBU15K Unit
Repetitive peak reverse voltage
Tj-40 to 150 -40 to 150 °C
Tstg -40 to 150 -40 to 150 °C
Parameter Symbol GBU15J GBU15K Unit
Peak forward surge current IFSM 250 250 A
Maximum forward voltage drop 1.05 1.05
Rating for fusing at Tj = 25 C I2t80 80 A2s
1 - Device mounted on 65 mm x 35 mm x 1.5 mm heatsink
2 - Device mounted on PCB without heatsink
Maximum ratings at TA = 25 °C, unless otherwise specified
Single Phase Glass Passivated Silicon
Bridge Rectifier
• Compliant with UL Provisions, UL Code: E303851
• Epoxy Resin material compliant with 94V-0 standards of
UL UL Material Flammability Provisions
Maximum reverse current at rated DC
blocking voltage
Single phase, half sine wave, 50 Hz, resistive load
For capacitive load derate current by 20%
Maximum forward rectified current
• Ideal for printed circuit boards
• Case: Epoxy resin body over passivated junctions
• High temperature soldering guaranteed: 260⁰C/ 10 seconds,
9.5 mm lead length
• High surge overload rating
Electrical characteristics at TA = 25 °C, unless otherwise specified
3 - Recommended mounted position is to bolt down device on a heatsink with silicon
thermal compond for maximum heat transfer using M3 screw.
Typical thermal resistance
0.8 (0.5 N.m is recommended)
Insulation strength (lead wire to case)
1
Oct. 2018 http://www.diodemodule.com/silicon_products/bridge_rectifiers/gbu15j.pdf