R Manual Swipe Magnetic Card Reader V3B Low Cost, Compact, Manual Swipe Reader H H H H H Low power C-MOS technology Multiple configurations Same size as the Omron HSR series TTL-compatible interface (clock & data) Available with or without cover Ordering Information Magnetic Tracks Supported (R, R/W) 1 2 3 Center JIS II IC Contact Interface Cover Cable Color Part Number R R R -- R R R -- -- No TTL Yes Yes Black V3B-1K -- No TTL No Yes Black R -- -- V3B-1 -- -- No TTL Yes Yes Black R -- V3B-3K -- -- -- No TTL No Yes Black V3B-3 -- -- R -- -- -- No TTL Yes Yes Black V3B-4K R -- -- -- No TTL No Yes Black V3B-4 -- -- R -- -- No TTL Yes Yes Black V3B-5K -- -- R -- -- No TTL No Yes Black V3B-5 R R -- -- -- No TTL Yes Yes Black V3B-6K R R -- -- -- No TTL No Yes Black V3B-6 -- R R -- -- No TTL Yes Yes Black V3B-7K -- R R -- -- No TTL No Yes Black V3B-7 Note: Cable harness is included with all V3B models. It is optional for V3A. J TYPICAL APPLICATIONS * Point-of Sale (POS) systems * ID card checkers * Club membership * Access management * Remote terminals for computers V3B V3B Specifications Part number V3B-jj Recommended card type ISO 7810, 7811/1-6 Recording method FM decoding (F2F) Card feeding speed 10 to 120 cm/second (10 to 100 cm/sec triple track) Service life of magnetic head 300,000 passes Operating power supply Current consumption +5 VDC 10% Single track 3 mA typical, 5 mA maximum Dual track 6 mA typical, 10 mA maximum Triple track 9 mA typical, 15 mA maximum Mounting location Indoors--away from direct sunlight or wet, humid environment Ambient temperature Operation Ambient humidity --10_ to 55_C (14_F to 131_F) Storage --30_ to 70_C (--22_F to 158_F) Operation 30% to 85% RH without condensation Storage 20% to 90% RH Vibration 10 to 150 Hz, single vibration, width of 0.15 mm Shock Peak acceleration 19.6 m/sec2 Dimensions With cover 100 W x 32 H x 32.5 D mm (3.94 W x 1.26 H x 1.28 D in) Without cover 100 W x 29.5 H x 27 D mm (3.94 W x 1.16 H x 1.06 D in) Weight Approx. 82 g with cover (52 g without cover) Engineering Data J INPUT CIRCUIT DIAGRAM J OUTPUT CIRCUIT DIAGRAM +5 VDC Input DC+5 V R1 R1: 100 k|p Output 0V 0V 2 V3B V3B J I/O INFORMATION Single Track Connector Harness Triple Track Connector Harness 5-pin Molex connector part number 51102--0500. 12-pin Molex connector part number 51102--1200. Pin # Signal Input/Output Description Pin # Signal Input/Output Description 1 RDP Output Read data 1 RDP1 Output Read data 1 2 RCP Output Read clock 2 RCP1 Output Read clock 1 3 CLS Output Card loaded 3 CLS1 Output Card loaded 1 4 +5 VDC -- -- 4 RDP2 Output Read data 2 5 0 VDC -- -- 5 RCP2 Output Read clock 2 6 CLS2 Output Card loaded 2 7 RDP3 Output Read data 3 Double Track Connector Harness 9-pin Molex connector part number 51102--0900. Pin # 1 2 Signal RDP1 RCP1 Input/Output Output Output 8 RCP3 Output Read clock 3 Description 9 CLS3 Output Card loaded 3 Read data 1/3 10 CSV Input Current save Read clock 1/3 11 5V -- -- 12 0V -- -- 3 CLS1 Output Card loaded 1/3 4 RDP2 Output Read data 2 5 RCP2 Output Read clock 2 6 CLS2 Output Card loaded 2 7 CSV Input Current save 8 5V -- -- 9 0V -- -- 3 V3B V3B Dimensions Unit: mm (inch) J V3B-V VK 100 (3.94) 33 (1.30) Card Feed Direction 25 (0.98) 32 (1.26) 4 -- f 2.5 Depth 7 For Mounting Screw (Applicable Screw: M3 Tapping) 250 20 (9.84 0.79) 92 0.2 (3.62 0.008) 16 0.2 (0.63 0.008) Note: Tolerances 0.3mm unless specified 8.5 (0.33) 4 V3B V3B J V3B-V V Card Feed Direction Mag. head 27 (1.06) Circuit board 100 (3.94) 22.5 (0.89) 29.5 (1.16) 250 20 (9.84 0.79) 92 0.2 (3.62 0.008) 4 (0.16) For Mounting Screw (Applicable Screw: M3 Tapping) 16 0.2 (0.63 0.008) Note: Tolerances 0.3mm unless specified 5.5 (0.22) 5 V3B V3B NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4. R OMRON ELECTRONICS, INC. OMRON CANADA, INC. 1-800-55-OMRON 416-286-6465 One East Commerce Drive Schaumburg, IL 60173 Cat. No. GC CR3 7/00 885 Milner Avenue Scarborough, Ontario M1B 5V8 Specifications subject to change without notice. 6 Printed in U.S.A.