5003 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Appliance Inlet DC Filter, ECO Design, Front- or Rear Side Mounting Screw-on mounting, front or back side PCB snap-in version MOLEX HCS-125 connector Screw-on mounting, front or back side Quick connect terminals 6.3 x 0.8 mm AMP Universal MATE-N-LOK or MOLEX MLX Snap-in mounting with wires (stranded) AMP Universal MATE-N-LOK or MOLEX MLX Approvals and Compliances Description - Panel Mount : Screw-on version from front or rear side, snap-in version from front side, PCB Version from rear side - 2 Functions : Appliance Inlet , DC line filter in standard version - Solder, quick connect or wires (stranded) Characteristics - Compact high-performance DC-filter Optimal shielding due to completely closed filter case, unpotted - Applications: - Mission Critical Ethernet LAN Routers - High uptime Ethernet LAN Switches - Fiber Optic WAN Switches - Fiber Optic WAN Multiplexer Other versions on request - Snap-in for panel thickness >2mm to 3mm flexible wire with various lenghts Quick connect terminals 4.8 x 0.8 mm Capacity CY 5.5 nF with long earth pin in connector References PCB Mounting Alternative: version 5120 for AC applications Weblinks pdf datasheet, html-datasheet, General Product Information, DistributorStock-Check, Accessories, Detailed request for product Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature Climatic Category Protection Class Terminal Panel Thickness S Material: Housing 15 A / 125 VDC 3 - 15 A @ Ta 40 C / 125 VDC > 0.5 kVDC between (VAC 1 min., DIN EN 50155) > 1.1 kVDC between protective conductor and live parts Test voltage (2 sec) -25 C to 85 C Line Filter MTBF DC Standard Version, UL 1283 Technical Details > 3'900'000 h acc. to MIL-HB-217 F 25/085/21 acc. to IEC 60068-1 Suitable for appliances with protection class I Quick connect terminals 6.3 x 0.8 mm Wire leads AWG 18 (10-15A AWG 16), 150 mm Screw: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 0.8 mm to 2 mm (all steps with one variant) Themoplast / steel tin-plated, black / metallic, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals EMC Products 1 5003 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 5003 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40020642 UL Approvals UL UL File Number: E72928 Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Dimension [mm] Front- or rear side mounting for screws with nuts or blind rivets, mating connector Molex HCS-125 2 max. 22.4 0.5 40 0.20 48.6 max. 30 R3 47 24.6 59 2 EMC Products 3.6 5003 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Rear side mounting with pre-formed, threaded holes for M3 screws, mating connector Molex HCS-125 2 max. 22.4 0.5 40 0.20 48.6 max. 30 R3 47 24.6 M3x0.5 59 Snap-in mounting from front side, mating connector Molex HCS-125 max. 22.4 min. 0.5 32.6 max. 30 R3 24.6 2 47 59 Front or rear side mounting for screws with nuts or blind rivets, mating connector AMP Universal MATE-N-LOK oder Molex MLX max. 22.4 0.5 10 40 0.20 48.6 max. 30 R3 40 24.6 3.6 52 EMC Products 3 5003 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Rear side mounting with pre-formed, threaded holes for M3 screws, mating connector AMP Universal MATE-N-LOK or Molex MLX max. 22.4 0.5 10 40 0.20 48.6 max. 30 R3 40 24.6 M3x0.5 52 Snap-in mounting from front side, mating connector AMP Universal MATE-N-LOK or Molex MLX max. 22.4 min. 0.5 10 32.6 max. 30 R3 24.6 40 52 40 0.15 21.5 0.10 Panel cutout for rear side mounting 29.4 0.10 Panel cutout for snap-in mounting 4 max.R3 40 0.15 Panel cutout for front side mounting max.R 1.5 +0.20 0 EMC Products +0.20 0 21.5 3.5 max.R3 3.5 0.1 30.3 22.8 29 0.1 5003 Power Entry Modules with Line Filter https://www.schurter.com /PG06 PCB snap-in rear-side mounting with pre-formed threaded holes for M3 screws, mating connector Molex HCS-125 2 max. 22.4 48.6 max. 30 40 min. 0.5 R3 47 M3x0.5 59 22.8 +0.20 0 27 0.10 o3.5 34 0.10 33.9 0.10 +0 0 .10 o1 .6 max.R3 12 0.10 40 0.15 30.3 +0.20 0 o6 0.05 PCB rear-side mounting with pre-formed threaded holes for M3 screws, mating connector Molex HCS-125 2 max. 22.4 12 48.6 max. 30 R3 47 M3x0.5 59 24.6 22.8 +0.20 0 +0 0 .10 .6 o1 33.9 0.10 max.R3 40 0.15 +0.20 0 12 0.10 30.3 40 min. 0.5 o3.5 EMC Products 5 5003 Power Entry Modules with Line Filter https://www.schurter.com /PG06 PCB snap-in rear-side mounting with pre-formed threaded holes for M3 screws, mating connector AMP Universal MATE-N-LOK or MOLEX MLX max. 22.4 27 12 10 48.6 max. 30 40 min. 0.5 R3 40 M3x0.5 42.5 24.6 22.8 52 +0.20 0 27 0.10 12 0.10 27 0.10 26.9 0.10 +0 0 .10 o1 .6 max.R3 40 0.15 +0.20 30.3 0 o6 0.5 o3.5 PCB rear-side mounting with pre-formed threaded holes for M3 screws, mating connector AMP Universal MATE-N-LOK or Molex MLX max. 22.4 R3 40 M3x0.5 52 24.6 22.8 +0.20 0 6 EMC Products 26.9 0.10 .6 +0 0 .10 o3.5 o1 40 0.15 +0.20 30.3 0 12 0.10 max.R3 10 12 48.6 max. 30 40 min. 0.5 5003 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Screw and snap-in mounting with flexible wire, mating connector Molex HCS-125 or AMP Universal MATE-N-LOK 2 max. 22.4 1.25 48.6 max. 30 40 0.20 min. 0.5 R3 150 M3x0.5 6.6 1) 47 59 24.6 22.8 21.5 0.10 +0.20 0 2) 3) M3 max.R3 max.R1.5 29.4 0.10 40 0.15 +0.20 0 30.3 max.R3 40 0.15 29 0.1 21.5 0.10 4) o3.5 1) Flexible wire, standard length 150 mm or special length on request 2) Panel cut-out screw-on version, front-side mounting 3) Panel cut-out, screw-on version, back-side mounting 4) Panel cut-out snap-in version, front-side mounting Mating Connector AMP Universal MATE-N-LOK Housing: AMP no. 1-480700-0 Female terminal (3 needed per housing): AMP no. 926901-1 Molex MLX Housing: Molex no. 50-84-1030 Female terminal (3 needed per housing): Molex no. 02-08-1002 Molex HCS-125 Housing: Molex no. 03-12-1036 Female terminal (3 needed per housing): Molex no. 18-12-1222 Technical Data of Filter-Components Rated Current [A] Filter-Type Inductances L [mH] Capacitance CX [nF] Capacitance CY [nF] R [M] 3 DC Standard Version 2x4 100 4.7 1 6 DC Standard Version 2 x 0.8 100 4.7 1 10 DC Standard Version 2 x 0.4 100 4.7 1 15 DC Standard Version 2 x 0.1 100 4.7 1 EMC Products 7 5003 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Diagrams 3 L1 1) 2 Cy R Cx L2 2) Cy 1 1) Line 2) Load Attenuation Loss - - - - 50 differential mode _____ 50 common mode Standard version 3A 6A 10 A 15A All Variants Rated Current [A] Mounting Mounting side Terminal Mating Connector Order Number 3 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0121.1 3 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.015B.1 3 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.016B.1 3 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0111.1 6 Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0231.1 6 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0221.1 6 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.025B.1 6 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.026B.1 6 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0211.1 6 Screw-on/Rivet Front-/Rear-Side Solder terminal Molex HCS-125 5003.0213.1 10 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0321.1 10 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.035B.1 10 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.036B.1 10 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0311.1 10 Screw-on/Rivet Front-/Rear-Side Flexible wire and Earth pin 6.3 x 0.8 Molex HCS-125 5003.0316.1 15 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0421.1 15 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.045B.1 15 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.046B.1 15 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0411.1 3 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1121.1 3 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.115B.1 3 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.116B.1 3 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1111.1 6 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1221.1 6 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.125B.1 6 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.126B.1 6 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1211.1 8 EMC Products 5003 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Rated Current [A] Mounting Mounting side Terminal Mating Connector Order Number 10 Snap-in Front Side Flexible wire and Earth pin 6.3 x 0.8 AMP / Molex MLX 5003.1336.1 10 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1321.1 10 Screw Rear Side Solder terminal AMP / Molex MLX 5003.1323.1 10 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.135B.1 10 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.136B.1 10 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1311.1 15 Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1431.1 15 Snap-in 2 - 3 mm Front Side Flexible wire and Earth solder terminal AMP / Molex MLX 5003.1448.1 15 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1421.1 15 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.145B.1 15 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.146B.1 15 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1411.1 Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Type for screw on mounting from rear side has pre-threaded holes for M3 screws Packaging unit 10 Pcs Accessories Description Assorted Covers Rear Cover 0859.0048 Cord retaining kits Cord retaining strain relief 4700.0005 Flat head, G 4700.0007 02.12.2017 Flat head, E The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. EMC Products 9 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Schurter: 5003.1211.1 5003.1221.1 5003.1421.1 5003.0311.1 5003.0121.1 5003.1321.1 5003.0211.1 5003.0411.1 5003.1121.1 5003.0421.1 5003.1111.1 5003.1411.1 5003.1311.1 5003.0321.1 5003.0111.1 5003.0221.1 5003.2111.1 5003.2211.1 5003.2311.1 5003.2411.1 5003.0331.1 5003.0131.1 5003.0431.1 5003.1331.1 5003.0231.1 5003.1131.1 5003.1431.1 5003.1231.1 5003.015B.1 5003.016B.1 5003.0213.1 5003.025B.1 5003.026B.1 5003.0316.1 5003.035B.1 5003.036B.1 5003.045B.1 5003.046B.1 5003.115B.1 5003.116B.1 5003.125B.1 5003.126B.1 5003.1323.1 5003.1336.1 5003.135B.1 5003.136B.1 5003.1448.1 5003.145B.1 5003.146B.1