1
Power Entry Modules with Line Filter 5003
https://www.schurter.com /PG06
EMC Products
Appliance Inlet DC Filter, ECO Design, Front- or Rear Side Mounting
Screw-on mounting, front or back side
PCB snap-in version
MOLEX HCS-125 connector
Screw-on mounting, front or back side
Quick connect terminals 6.3 x 0.8 mm
AMP Universal MATE-N-LOK or MOLEX MLX
Snap-in mounting
with wires (stranded)
AMP Universal MATE-N-LOK or MOLEX MLX
Approvals and Compliances
Description
- Panel Mount :
Screw-on version from front or rear side, snap-in version from front
side, PCB Version from rear side
- 2 Functions :
Appliance Inlet , DC line filter in standard version
- Solder, quick connect or wires (stranded)
Characteristics
- Compact high-performance DC-filter
Optimal shielding due to completely closed filter case, unpotted
- Applications:
- Mission Critical Ethernet LAN Routers
- High uptime Ethernet LAN Switches
- Fiber Optic WAN Switches
- Fiber Optic WAN Multiplexer
Other versions on request
- Snap-in for panel thickness >2mm to 3mm
- flexible wire with various lenghts
- Quick connect terminals 4.8 x 0.8 mm
- Capacity CY 5.5 nF
- with long earth pin in connector
References
PCB Mounting
Alternative: version 5120 for AC applications
Weblinks
pdf datasheet, html-datasheet, General Product Information, Distributor-
Stock-Check, Accessories, Detailed request for product
Technical Data
Ratings IEC 15 A / 125 VDC
Ratings UL/CSA 3 - 15 A @ Ta 40 °C / 125 VDC
Dielectric Strength > 0.5 kVDC between (VAC 1 min., DIN
EN 50155)
> 1.1 kVDC between protective conduc-
tor and live parts
Test voltage (2 sec)
Allowable Operation Tempe-
rature
-25 °C to 85 °C
Climatic Category 25/085/21 acc. to IEC 60068-1
Protection Class Suitable for appliances with protection
class I
Terminal Quick connect terminals 6.3 x 0.8 mm
Wire leads AWG 18 (10-15A AWG 16),
150 mm
Panel Thickness S Screw: max 8 mm
Mounting screw torque max 0.5 Nm
Snap-in: 0.8 mm to 2 mm
(all steps with one variant)
Material: Housing Themoplast / steel tin-plated, black /
metallic, UL 94V-0
Line Filter DC Standard Version, UL 1283
Technical Details
MTBF > 3'900'000 h acc. to MIL-HB-217 F
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
2
Power Entry Modules with Line Filter
5003 https://www.schurter.com /PG06
EMC Products
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: 5003
Approval Logo Certificates Certification Body Description
VDE Approvals VDE Certificate Number: 40020642
UL Approvals UL UL File Number: E72928
Product standards
Product standards that are referenced
Organization Design Standard Description
Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes
Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements
Designed according to UL 498 Standard for Attachment Plugs and Receptacles
Designed according to UL 1283 Electromagnetic interference filters
Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Application standards
Application standards where the product can be used
Organization Design Standard Description
Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information
technologyequipment.
Compliances
The product complies with following Guide Lines
Identification Details Initiator Description
CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
RoHS SCHURTER AG EU Directive RoHS 2011/65/EU
China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
Dimension [mm]
Front- or rear side mounting for screws with nuts or blind rivets, mating connector Molex HCS-125
40
24.6
59
3.6
max. 30
48.6
R 3
max. 22.4
0.5
±0.20
47
2
3
Power Entry Modules with Line Filter 5003
https://www.schurter.com /PG06
EMC Products
Rear side mounting with pre-formed, threaded holes for M3 screws, mating connector Molex HCS-125
40
24.6
59
M3x0.5
max. 30
48.6
R 3
max. 22.4
0.5
±0.20
47
2
Snap-in mounting from front side, mating connector Molex HCS-125
24.6
59
max. 30
32.6
R 3
max. 22.4 min. 0.5
47 2
Front or rear side mounting for screws with nuts or blind rivets, mating connector AMP Universal MATE-N-LOK oder Molex MLX
40
24.6
52
3.6
max. 30
48.6
R 3
max. 22.4
0.5
±0.20
40
10
4
Power Entry Modules with Line Filter
5003 https://www.schurter.com /PG06
EMC Products
Rear side mounting with pre-formed, threaded holes for M3 screws, mating connector AMP Universal MATE-N-LOK or Molex MLX
40
24.6
52
M3x0.5
max. 30
48.6
R 3
max. 22.4
0.5
±0.20
40
10
Snap-in mounting from front side, mating connector AMP Universal MATE-N-LOK or Molex MLX
24.6
52
max. 30
32.6
R 3
max. 22.4 min. 0.5
40
10
29
40
±0.1
21.5
max.R3
±0.1
±0.15
3.5
Panel cutout for front side mounting
30.3
40
+0.20
0
22.8
max.R3
+0.20
0
±0.15
3.5
Panel cutout for rear side mounting
21.5 ±0.10
max.R 1.5
29.4 ±0.10
Panel cutout for snap-in mounting
5
Power Entry Modules with Line Filter 5003
https://www.schurter.com /PG06
EMC Products
PCB snap-in rear-side mounting with pre-formed threaded holes for M3 screws, mating connector Molex HCS-125
M3x0.5
max. 30
40
48.6
R 3
max. 22.4
30.3
40
+0.20
0
22.8
max.R3
+0.20
0
±0.15
ø3.5
27±0.10
12±0.10
ø6
34 ±0.10
33.9 ±0.10
ø1.6 +0.10
0
±0.05
min. 0.5
47
2
59
PCB rear-side mounting with pre-formed threaded holes for M3 screws, mating connector Molex HCS-125
24.6
M3x0.5
max. 30
40
48.6
R 3
max. 22.4
min. 0.5
47
2
30.3
40
+0.20
0
22.8
max.R3
+0.20
0
±0.15
ø3.5
12±0.10
33.9 ±0.10
ø1.6 +0.10
0
12
59
6
Power Entry Modules with Line Filter
5003 https://www.schurter.com /PG06
EMC Products
PCB snap-in rear-side mounting with pre-formed threaded holes for M3 screws, mating connector AMP Universal MATE-N-LOK or MOLEX MLX
24.6
M3x0.5
42.5
max. 30
40
48.6
R 3
max. 22.4
min. 0.5
40
10
30.3
40
+0.20
0
22.8
max.R3
+0.20
0
±0.15
ø3.5
27±0.10
12±0.10
ø6
27±0.10
26.9 ±0.10
ø1.6 +0.10
0
±0.5
12
27
52
PCB rear-side mounting with pre-formed threaded holes for M3 screws, mating connector AMP Universal MATE-N-LOK or Molex MLX
24.6
M3x0.5
max. 30
40
48.6
R 3
max. 22.4
min. 0.5
40
10
30.3
40
+0.20
0
22.8
max.R3
+0.20
0
±0.15
12±0.10
26.9 ±0.10
ø1.6+0.10
0
12
52
ø3.5
7
Power Entry Modules with Line Filter 5003
https://www.schurter.com /PG06
EMC Products
Screw and snap-in mounting with flexible wire, mating connector Molex HCS-125 or AMP Universal MATE-N-LOK
24.6
M3x0.5
max. 30
40
48.6
R 3
max. 22.4
min. 0.5 1.25
47150 6.6
2
30.3
40
+0.20
0
22.8
max.R3
+0.20
0
±0.15
ø3.5
59
±0.20
max.R1.5
29.4 ±0.10
21.5±0.10
40
21.5
max.R3
±0.15
M3
±0.10
29±0.1
1)
3) 4)2)
1) Flexible wire, standard length 150 mm or special length on request
2) Panel cut-out screw-on version, front-side mounting
3) Panel cut-out, screw-on version, back-side mounting
4) Panel cut-out snap-in version, front-side mounting
Mating Connector
Molex HCS-125
Housing: Molex no. 03-12-1036
Female terminal (3 needed per housing): Molex no. 18-12-1222
AMP Universal MATE-N-LOK
Housing: AMP no. 1-480700-0
Female terminal (3 needed per housing): AMP no. 926901-1
Molex MLX
Housing: Molex no. 50-84-1030
Female terminal (3 needed per housing): Molex no. 02-08-1002
Technical Data of Filter-Components
Rated Current
[A]
Filter-Type Inductances
L [mH]
Capacitance
CX [nF]
Capacitance
CY [nF]
R [MΩ]
3DC Standard Version 2 x 4 100 4.7 1
6DC Standard Version 2 x 0.8 100 4.7 1
10 DC Standard Version 2 x 0.4 100 4.7 1
15 DC Standard Version 2 x 0.1 100 4.7 1
8
Power Entry Modules with Line Filter
5003 https://www.schurter.com /PG06
EMC Products
Diagrams
3
2
1
Cx
L1
L2
Cy
Cy
R
1) 2)
1) Line
2) Load
Attenuation Loss - - - - 50Ω differential mode _____ 50Ω common mode
Standard version
3 A 6 A 10 A 15A
All Variants
Rated Current
[A]
Mounting Mounting side Terminal Mating Connector Order Number
3 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0121.1
3 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.015B.1
3 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.016B.1
3 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0111.1
6 Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0231.1
6 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0221.1
6 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.025B.1
6 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.026B.1
6 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0211.1
6 Screw-on/Rivet Front-/Rear-Side Solder terminal Molex HCS-125 5003.0213.1
10 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0321.1
10 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.035B.1
10 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.036B.1
10 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0311.1
10 Screw-on/Rivet Front-/Rear-Side Flexible wire and Earth pin 6.3 x 0.8 Molex HCS-125 5003.0316.1
15 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0421.1
15 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.045B.1
15 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.046B.1
15 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0411.1
3 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1121.1
3 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.115B.1
3 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.116B.1
3 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1111.1
6 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1221.1
6 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.125B.1
6 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.126B.1
6 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1211.1
9
Power Entry Modules with Line Filter 5003
https://www.schurter.com /PG06
EMC Products
Rated Current
[A]
Mounting Mounting side Terminal Mating Connector Order Number
10 Snap-in Front Side Flexible wire and Earth pin 6.3 x 0.8 AMP / Molex MLX 5003.1336.1
10 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1321.1
10 Screw Rear Side Solder terminal AMP / Molex MLX 5003.1323.1
10 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.135B.1
10 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.136B.1
10 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1311.1
15 Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1431.1
15 Snap-in 2 - 3 mm Front Side Flexible wire and Earth solder terminal AMP / Molex MLX 5003.1448.1
15 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1421.1
15 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.145B.1
15 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.146B.1
15 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1411.1
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
Type for screw on mounting from rear side has pre-threaded holes for M3 screws
Packaging unit 10 Pcs
Accessories
Description
Assorted Covers
Rear Cover
0859.0048
Cord retaining kits
Cord retaining strain relief
Flat head, E 4700.0005
Flat head, G 4700.0007
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
02.12.2017
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Schurter:
5003.1211.1 5003.1221.1 5003.1421.1 5003.0311.1 5003.0121.1 5003.1321.1 5003.0211.1 5003.0411.1
5003.1121.1 5003.0421.1 5003.1111.1 5003.1411.1 5003.1311.1 5003.0321.1 5003.0111.1 5003.0221.1
5003.2111.1 5003.2211.1 5003.2311.1 5003.2411.1 5003.0331.1 5003.0131.1 5003.0431.1 5003.1331.1
5003.0231.1 5003.1131.1 5003.1431.1 5003.1231.1 5003.015B.1 5003.016B.1 5003.0213.1 5003.025B.1
5003.026B.1 5003.0316.1 5003.035B.1 5003.036B.1 5003.045B.1 5003.046B.1 5003.115B.1 5003.116B.1
5003.125B.1 5003.126B.1 5003.1323.1 5003.1336.1 5003.135B.1 5003.136B.1 5003.1448.1 5003.145B.1
5003.146B.1
