DATA SHEET PHOTOCOUPLER PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 HIGH ISOLATION VOLTAGE SINGLE TRANSISTOR TYPE MULTI PHOTOCOUPLER SERIES -NEPOC Series- DESCRIPTION The PS2561A-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor to realize an excellent cost performance. The PS2561A-1 is in a plastic DIP (Dual In-line Package) and the PS2561AL-1 is lead bending type (Gull-wing) for surface mount. The PS2561AL1-1 is lead bending L1 type and the PS2561AL2-1 is lead bending L2 type (Gull-wing). FEATURES * High isolation voltage (BV = 5 000 Vr.m.s.) PIN CONNECTION (Top View) * Ordering number of taping product: PS2561AL-1-E3, E4, F3, F4 : PS2561AL2-1-E3, E4 4 3 1. Anode 2. Cathode 3. Emitter 4. Collector * Pb-Free product * Safety standards * UL approved: No. E72422 1 * CSA approved: No. CA 101391 2 * BSI approved: No. 7112, 7420 * SEMKO approved: No. 607784 * NEMKO approved: No. P03100141 * DEMKO approved: No. 312032 * FIMKO approved: No. FI 22778 <R> * DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40008862 (Option) APPLICATIONS * Power supply * Telephone/FAX. * FA/OA equipment * Programmable logic controller The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. PN10222EJ06V0DS (6th edition) Date Published December 2008 NS Printed in Japan The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. 2003, 2008 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 PACKAGE DIMENSIONS (UNIT : mm) DIP Type Long Creepage Distance PS2561A-1 PS2561AL1-1 4.60.35 4.60.35 7.62 3 1 2 1 2 0 to 15 +0.1 0.25 -0.05 1.250.15 0.500.10 0.25 M 10.16 3.5 0.3 3.15 3.85 0.35 0.4 3.50.3 3.20.4 4.150.4 4 6.50.5 6.50.5 4 3 0.500.1 0.25 M 1.250.15 +0.1 0.25-0.05 2.54 0 to 15 2.54 Lead Bending Type (Gull-Wing) Long Creepage Distance (Gull-Wing) PS2561AL2-1 PS2561AL-1 4.60.35 4.60.35 3 1 2 3 1 2 0.25 M 2.54 0.25 1.250.15 0.25 M +0.1 0.25-0.05 0.250.2 3.50.3 0.1 +0.1 -0.05 0.25 +0.1 -0.05 6.50.5 3.50.3 0.90.25 9.600.4 1.250.15 2 4 6.50.5 4 0.90.25 10.16 +0.2 2.54 0.15 Data Sheet PN10222EJ06V0DS 11.8-0.5 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 <R> MARKING EXAMPLE No. 1 pin Mark 2561A NJ831 N J Assembly Lot 8 31 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Pb-Free Pb-Free and Halogen Free Made in Japan Made in Taiwan New PKG J K New PKG R Y *1 *1 Special version Data Sheet PN10222EJ06V0DS 3 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 <R> ORDERING INFORMATION Part Number Order Number Solder Plating Specification Pb-Free Packing Style Magazine case 100 pcs Safety Standard Approval PS2561A-1 PS2561A-1-A PS2561AL-1 PS2561AL-1-A (UL, CSA, BSI, PS2561AL1-1 PS2561AL1-1-A NEMKO, DEMKO, PS2561AL2-1 PS2561AL2-1-A SEMKO, FIMKO PS2561AL-1-E3 PS2561AL-1-E3-A PS2561AL-1-E4 PS2561AL-1-E4-A PS2561AL-1-F3 PS2561AL-1-F3-A PS2561AL-1-F4 PS2561AL-1-F4-A PS2561AL2-1-E3 PS2561AL2-1-E3-A PS2561AL2-1-E4 PS2561AL2-1-E4-A PS2561A-1-V PS2561A-1-V-A PS2561AL-1-V PS2561AL-1-V-A (VDE0884 Part2) PS2561AL1-1-V PS2561AL1-1-V-A Approved (option) PS2561AL2-1-V PS2561AL2-1-V-A PS2561AL-1-V-E3 PS2561AL-1-V-E3-A PS2561AL-1-V-E4 PS2561AL-1-V-E4-A PS2561AL-1-V-F3 PS2561AL-1-V-F3-A PS2561AL-1-V-F4 PS2561AL-1-V-F4-A PS2561AL2-1-V-E3 PS2561AL2-1-V-E3-A PS2561AL2-1-V-E4 PS2561AL2-1-V-E4-A PS2561A-1 PS2561A-1Y-A Special version PS2561AL-1 PS2561AL-1Y-A (Pb-Free and (UL, CSA, BSI, PS2561AL1-1 PS2561AL1-1Y-A Halogen Free) NEMKO, DEMKO, PS2561AL2-1 PS2561AL2-1Y-A PS2561AL-1-F3 PS2561AL-1Y-F3-A Embossed Tape 2 000 pcs/reel PS2561AL2-1-E3 PS2561AL2-1Y-E3-A Embossed Tape 1 000 pcs/reel PS2561A-1-V PS2561A-1Y-V-A Magazine case 100 pcs PS2561AL-1-V PS2561AL-1Y-V-A (VDE0884 Part2) PS2561AL1-1-V PS2561AL1-1Y-V-A Approved (option) PS2561AL2-1-V PS2561AL2-1Y-V-A PS2561AL-1-V-F3 PS2561AL-1Y-V-F3-A Embossed Tape 2 000 pcs/reel PS2561AL2-1-V-E3 PS2561AL2-1Y-V-E3-A Embossed Tape 1 000 pcs/reel Embossed Tape 1 000 pcs/reel Standard products PS2561A-1 approved) Embossed Tape 2 000 pcs/reel Embossed Tape 1 000 pcs/reel Magazine case 100 pcs DIN EN60747-5-2 Embossed Tape 1 000 pcs/reel Embossed Tape 2 000 pcs/reel Embossed Tape 1 000 pcs/reel Magazine case 100 pcs Standard products SEMKO, FIMKO approved) DIN EN60747-5-2 *1 For the application of the Safety Standard, following part number should be used. 4 Application Part *1 Number Data Sheet PN10222EJ06V0DS PS2561A-1 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Parameter Symbol Ratings Unit Reverse Voltage VR 6 V Forward Current (DC) IF 30 mA PD/C 1.5 mW/C PD 150 mW IFP 0.5 A Collector to Emitter Voltage VCEO 70 V Emitter to Collector Voltage VECO 5 V IC 30 mA PC/C 1.5 mW/C PC 150 mW BV 5 000 Vr.m.s. Operating Ambient Temperature TA -55 to +100 C Storage Temperature Tstg -55 to +150 C Diode Power Dissipation Derating Power Dissipation *1 Peak Forward Current Transistor Collector Current Power Dissipation Delay Power Dissipation Isolation Voltage *2 *1 PW = 100 s, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output Pins 1-2 shorted together, 3-4 shorted together. Data Sheet PN10222EJ06V0DS 5 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 ELECTRICAL CHARACTERISTICS (TA = 25C) Parameter Diode Transistor Symbol Conditions Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V Terminal Capacitance Ct V = 0 V, f = 1.0 MHz ICEO VCE = 70 V, IF = 0 mA CTR IF = 5 mA, VCE = 5 V Collector Saturation Voltage VCE (sat) IF = 10 mA, IC = 2 mA Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz *2 Rise Time tr *2 tf Collector to Emitter Dark MIN. TYP. MAX. Unit 1.2 1.4 V 5 A 10 pF 100 nA 400 % 0.3 V Current Coupled Current Transfer Ratio 50 *1 (IC/IF) Fall Time 0.13 10 VCC = 10 V, IC = 2 mA, RL = 100 11 0.4 pF 5 s 7 *1 CTR rank N : 50 to 300 (%) H : 80 to 160 (%) Q : 100 to 200 (%) W : 130 to 260 (%) L : 200 to 400 (%) *2 Test circuit for switching time VCC PW = 100 s Duty cycle = 1/10 Input ton IF td In monitor toff ts VOUT 50 RL = 100 90% Output 10% tr 6 Data Sheet PN10222EJ06V0DS tf PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 200 1.5 mW/C 150 100 50 0 25 50 75 100 TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 200 1.5 mW/C 150 100 50 0 125 25 Ambient Temperature TA (C) IF = 10 mA Collector Current IC (mA) TA = +100C +60C +25C 5 0C -25C -55C 1 0.5 20 15 IF = 5 mA 10 5 IF = 2 mA IF = 1 mA 0.1 0.8 0.9 1.0 1.1 1.2 1.3 1.4 0 1.5 2 4 6 10 8 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 10 10 000 IF = 10 mA 1 000 VCE = 70 V 100 VCE = 24 V 10 1 0 25 50 75 100 IF = 5 mA Collector Current IC (mA) Collector to Emitter Dark Current ICEO (nA) 125 25 10 0.05 0.7 100 COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 100 Forward Current IF (mA) 75 Ambient Temperature TA (C) FORWARD CURRENT vs. FORWARD VOLTAGE 50 50 IF = 2 mA 1 0.1 0 Ambient Temperature TA (C) Remark IF = 1 mA 0.2 0.4 0.6 0.8 1.0 Collector Saturation Voltage VCE (sat) (V) The graphs indicate nominal characteristics. Data Sheet PN10222EJ06V0DS 7 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 CURRENT TRANSFER RATIO vs. FORWARD CURRENT 300 1.4 Current Transfer Ratio CTR (%) Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE 1.2 1.0 0.8 0.6 Normalized to 1.0 at TA = 25C, IF = 5 mA, VCE = 5 V CTR:130% CTR:270% 0.4 0.2 0 -50 -25 0 25 50 75 250 VCE = 5 V, n=2 200 Sample A B 150 100 50 0 0.01 100 Ambient Temperature TA (C) 1 10 100 Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE SWITCHING TIME vs. LOAD RESISTANCE 1 000 100 IC = 2 mA, VCC = 10 V, CTR = 216% IF = 5 mA, VCC = 5 V, CTR = 216% tf tr Switching Time t ( s) Switching Time t ( s) 0.1 10 td ts 1 tf 100 ts 10 tr 0.1 10 100 1 000 td 1 1 10 000 Load Resistance RL () 10 100 Load Resistance RL (k) FREQUENCY RESPONSE LONG TERM CTR DEGRADATION 5 1.2 0 1.0 -5 100 -10 300 -15 -20 RL = 1 k CTR (Relative Value) Normalized Gain GV IF = 5 mA (TYP.) 0.8 25C TA = 25C 0.6 0.2 IF = 5 mA, VCE = 5 V -25 0.1 1 10 100 1 000 0 10 Frequency f (kHz) Remark 8 60C TA = 60C 0.4 102 103 Time (Hr) The graphs indicate nominal characteristics. Data Sheet PN10222EJ06V0DS 104 105 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 TAPING SPECIFICATIONS (UNIT : mm) 1.550.1 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 5.30.1 8.00.1 0.4 Tape Direction PS2561AL-1-E3 PS2561AL-1-E4 Outline and Dimensions (Reel) 2.00.5 21.00.8 80.01.0 R 1.0 2542.0 2.00.5 13.00.2 17.51.0 21.51.0 Packing: 1 000 pcs/reel Data Sheet PN10222EJ06V0DS 15.9 to 19.4 Outer edge of flange 9 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 1.550.1 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 5.30.1 8.00.1 0.4 Tape Direction PS2561AL-1-F3 PS2561AL-1-F4 Outline and Dimensions (Reel) 2.00.5 21.00.8 1001.0 R 1.0 3302.0 2.00.5 13.00.2 17.51.0 21.51.0 Packing: 2 000 pcs/reel 10 Data Sheet PN10222EJ06V0DS 15.9 to 19.4 Outer edge of flange PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 2.050.1 4.40.2 12.350.15 11.50.1 1.550.1 24.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 0.38 6.60.2 12.00.1 Tape Direction PS2561AL2-1-E3 PS2561AL2-1-E4 Outline and Dimensions (Reel) R 1.0 21.00.8 1001.0 2.00.5 13.00.2 3302.0 2.00.5 25.51.0 29.51.0 Packing: 1 000 pcs/reel Data Sheet PN10222EJ06V0DS 23.9 to 27.4 Outer edge of flange 11 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature 260C or below (package surface temperature) * Time of peak reflow temperature 10 seconds or less * Time of temperature higher than 220C 60 seconds or less * Time to preheat temperature from 120 to 180C 12030 s * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature 260C or below (molten solder temperature) * Time 10 seconds or less * Preheating conditions 120C or below (package surface temperature) * Number of times One (Allowed to be dipped in solder including plastic mold portion.) * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron * Peak temperature (lead part temperature) 350C or below * Time (each pins) 3 seconds or less * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100C. 12 Data Sheet PN10222EJ06V0DS PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler Check the setting values before use, since the forward current conditions at CTR measurement differ according to product. When using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially below IF = 1 mA. Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10222EJ06V0DS 13 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 <R> SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Symbol Climatic test class (IEC 60068-1/DIN EN 60068-1) Spec. Unit 55/100/21 Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.5 x UIORM, Pd < 5 pC Test voltage (partial discharge test, procedure b for all devices) UIORM Upr 890 1 335 Vpeak Vpeak Upr 1 669 Vpeak UTR 8 000 Vpeak Upr = 1.875 x UIORM, Pd < 5 pC Highest permissible overvoltage Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) 2 Clearance distance >7.0 mm Creepage distance >7.0 mm Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11)) CTI Material group (DIN EN 60664-1 VDE0110 Part 1) 175 III a Storage temperature range Tstg -55 to +150 C Operating temperature range TA -55 to +100 C Ris MIN. Ris MIN. 10 11 10 Package temperature Tsi 175 C Current (input current IF, Psi = 0) Isi 400 mA Power (output or total power dissipation) Psi 700 mW Ris MIN. 10 Isolation resistance, minimum value VIO = 500 V dc at TA = 25C VIO = 500 V dc at TA MAX. at least 100C 12 Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Isolation resistance VIO = 500 V dc at TA = Tsi 14 Data Sheet PN10222EJ06V0DS 9 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 * The information in this document is current as of December, 2008. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1 Data Sheet PN10222EJ06V0DS 15 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth.