Thermofit Molded Parts Part Number : 222F211thru285 Specification Control Drawing Description : Boot, 90 Deg., With Lip NOTES p r 1. All dimensions are in __inches COATING (SEE NOTE 3 { [millimeters] ( ) l - f yom 2. Dimensions appearing in table are as follows: | 1 | of t a As Supplied sJ a L b - After Unrestricted Recovery HW T 3. Coating is optional. As supplied H DIA dimensions appearing in table are TAN for uncoated parts. When coating Jo is added, entry diameters will be reduced by .06 max. 4. "S & T dimensions apply to a minimum of 240 of the circumference. AS SUPPLIED AFTER UNRESTRICTED RECOVERY TABLE OF DIMENSIONS PART H J P R JO HW JW S T NUMBER Min Max Min Max | 10% | 10% | 10% }+.06 -.03) +.03 }+.06 -.03) +.03 a b a b b b b b b b b 309F 011 94 -39 .68 .26 4.14 .73 3.45 .06 -06 .06 .05 [23,9] | [9,9] |[17,3] | [6,6] |[105,2]][18,8] |[87.6] |[1.52] |11,52] | [1,52] | [1,27] 220F271 1.07 52 -82 -30 4.88 -78 3.90 -06 -06 .06 -05 [27,2] | [13,2] [20,8] [7,6] [124,0] | [19,8] [99,1] [1,52] | ]1,52] [1,52] [1,27] 399932 1.22 73 .96 .35 5.76 .82 4.50 -07 -06 .07 .05 [31,0] |[18,5] | [24,4] | [89] |[146,3]][20,8] [114.3] |[1,78] |11,52] |[1,78] |[1,27] 200F242 1.40 .B7 1.13 -40 6.78 .86 5.22 07 -06 -O7 -05 [35,6] | [22,1] [28,7] | [10,2] |[172,2]|[21,8] |[132,6] |[1.78] | 1,52] [1,78] [1,27] 009953 1.53 1.11 1.24 43 7.29 .96 5.66 .07 .06 .O7 .O7 [38,9] | [28,2] |[31,5] | [10,9] | [185,2]][24,4] |[143,8] |[1.78] |31,52] |[1,78] | [1,78] 229F263 1.78 1.27 1.51 -50 8.41 1.08 6.66 07 -06 -O7 07 IF THIS DOCUMENT IS PRINTED IT [45,2] [32,3] [38,4] | [12,7] | [213.6] |[27,4] |[169,.2] |[1.78] | 1,52] [1,78] [1,78] BECOMES UNCONTROLLED. 200F 274 2.03 1.62 1.75 -59 8.84 | 1.16 6.82 .07 .O7 .O7 .O7 CHECK FOR THE LATEST REVISION. [51,6] | [41.1] | [44.5] | [15.0] | [224.5]}[29.5] |[173.2] |[1.78] |[1.78] |[1.78] | [1.78] 229F285 2.47 1.69 1.86 -69 8.95 1.31 6.62 .08 07 -07 -08 [62,7] [42,9] [47,2] | [17,5] [227,3]}[33,3] |[168,1] |[2,03] | [1,78] [1,78] [2,03] = TE Raychem TE Connectivit tal . . TE CONNECTIVITY. orive Revision : P1 Part Number : 222F 211 thru285 MENLO PARK, CALIFORNIA 94025 Date : 29MAR11 Description : Boot, 90 Deg., With Lip 2006,2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Pa e 4 OF ? Company. All Rights Reserved. g CAD FILE MP060168 Molded Parts Part Number: 222F211thru285 Specification Control Drawing Description : Boot, 90 Deg., With Lip COMPATABILITY CHART MATERIAL DASH NO.) MATERIAL DESCRIPTION RT SPEC COATING SLASH NO. COATING S NO. COATING DESCRIPTION 50 Flexible VPB RTI-1313 N/A -51 Flexible EPB RT-1321 /164 S-1124 Adhesive -7 Flexible Polyolefin RT-1316 /42,/86,/180 S-1017,5-1048,S1030) Adhesive -770 NBCCS RT770 TYPE Il ORDERING INFORMATION | 222F2XX XX XX /XXX -O Base part number Material dash number (See Compatability Chart) Modification number Adhesive slash number IF THIS DOCUMENT IS PRINTED IT BECOMES UNCONTROLLED. (If necessary, see Compatability Chart) CHECK FOR THE LATEST REVISION. Color Designator THIS DRAWING IS SUBJECT TO CHANGE WITHOUT NOTICE; CONSULT YOUR NEAREST FIELD REPRESENTATIVE FOR CURRENT REVISION SETE peychem TE Connectivity TE CONNECTIVITY Revision : P1 Part Number : 222F211thru2&5 MENLO PARK, CALIFORNIA 94025 Date : 20APR11 Description : Boot, 90 Deg., With Lip 2006,2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Page 2 OF 2 CAD FILE MPO060168 Company. All Rights Reserved.