E30-01K - Cherry Electrical Products

GENERAL PURPOSE — SINGLE & DOUBLE POLE

E Series

Features

5 current ratings

Choice of actuator styles

3 terminal types (optional screw

terminals available — consult factory)

3 contact arrangements

Long-life coil spring mechanism

High-temperature 150°C and 200°C

available on select models (consult factory)

Specifications

Electrical

Temperature Rating: 105°C Std. (150°C and 200°C optional — E13, E14, E19, E20, G13)

85°C Std. (E28 and E29), 85°C Std. (150°C optional) E25

Flammability Rating: UL94HB

Materials

Case: General Purpose Phenolic

Actuating Button: Thermoplastic Nylon

Common Terminals: Brass (E13, E19, E19A, G13, G20), Silver-Plated Brass (E14, E20),

Silver-Plated Copper (E28, E29, E30)

NO and NC Terminals: Brass (E13, E19, E19A, G13, G20)

Copper (E14, E20, E28, E29, E30)

Moving Blade: Brass (E13, E19, E19A, G13, G20)

Silver-Plated Beryllium Copper (E14, E20, E28, E29, E30)

Spring: Stainless Steel

Auxiliary Actuators: Cold-Rolled Steel (Nickel-Plated)

Roller: Sintered Stainless Steel

Contacts: Gold Crosspoint (G13, G20, E19A)

Silver-Cadmium Oxide (E13, E14, E19, E19A, E20, E28, E29, E30)

Silver Alloy (E19A, E29, E30)

Electrical Ratings

Electrical Life at Rated Load

Switch According to VDE According to UL

Series EN61058 Rating UL1054 Rating (Min. Operations) (Min. Operations)

E13/E19 N/A 15A, 125/250VAC; 3/4HP, 125VAC N/A 6,000*

1-1/2HP, 250VAC; 2A, 48 VDC (E13 Only)**

E19A N/A 15A, 125/250VAC; 3/4HP, 125VAC; 1-1/2HP, 250VAC N/A 6,000

(mixed ratings) 0.1A, 125VAC

E14/E25 N/A 25A, 125/250VAC; 1HP, 125VAC N/A 6,000

2HP, 250VAC; 2A, 48VDC (E14 Only)**

E20 N/A 20A, 125/250VAC; 1HP, 125VAC N/A 6,000

2HP, 250VAC

E28/E29 N/A 30.1A, 125/250/277VAC N/A 6,000

(UL Approved Only — Resistive Load Only)

E30 N/A 30.1A, 125/250VAC; 1HP, 125VAC N/A 6,000

2HP, 250VAC (UL Only)

G13/G20 N/A 0.1A, 125VAC N/A 6,000*

0.1A, 30VDC (G13 Only)

*Indicates 100K life available.

**100K Hi-temp not available

Dimensions — Single Pole inches (mm) Actuators — Single Pole

Standard type integral hinged lever and

roller actuators are available in choice of

two mounting positions. Actuation lengths

are dimensioned from centerline of switch

mounting hole as shown.

“J” & “M” Type

Optional Hardware — Single Pole

Brass Hex Nut 0012-0023

Brass Knurled Nut 0012-0025

Brass Hex Nut 0012-0028

(Nickel-Plated)

Brass Knurled Nut 0012-0026

(Nickel-Plated)

Star Washer (Lockwasher) 0012-0073

Specifications subject to change without notice.

Ordering Information

Select the current rating you need.

Combine the corresponding Series/Prefix

number with the appropriate suffix number

for the switch you need.

Circuitry — Single Pole

Contact arrangement available in choice of

single pole double throw or single pole sin-

gle throw, either normally open or normally

closed. In general, normally open may be

specified by changing suffix number from

00 to 01 and normally closed by changing

suffix number to 02.

Example: E13-00E is double throw,

E13-01E is normally open, and E13-02E

is normally closed.

Mounting — Single Pole

Recommended mounting screw: #6-32

round head. Recommended torque on screw:

6 inch lbs. max. Recommended maximum

torque for ferrule: 20 inch pounds

Terminals — Single Pole

Standard 0.250″x 0.032″ (6.35mm x 0.81mm)

[Optional 0.187″x 0.032″ (4.75mm x 0.81mm)]

QC terminals can be furnished with angle

formed up or down. Forms include straight

30°, 45°, 85° up or down. Other forms can

be provided.

Actuator Specifications — Single Pole

Maximum Maximum Operating Minimum Max. Movement Actuation

Operating Pre-Travel Point* Over-Travel Differential Length**

Series/ Actuator Switch Force inches inches inches inches inches

Prefix Type Type (g) (mm) (mm) (mm) (mm) (mm)

E13/G13 –00E 425 0.050 0.285±0.0200.100 0.015 —

(1.27) (7.24±0.51) (2.54) (0.38)

E14/E29/E30 –00A 850 0.100 0.248±0.0260.050 0.015 —

(2.54) (6.30±0.66) (1.27) (0.38)

E13/G13 –00J 425 0.050 0.670±0.030 0.108 0.015 —

(1.27) (17.02±0.76) (2.74) (0.38)

E14/E29/E30 850 0.100 0.633±0.030 0.050 0.015 —

(2.54) (16.08±0.76) (1.27) (0.38)

E13/G13 –00M 425 0.050 0.812±0.030 0.218 0.015 —

(1.27) (20.63±0.76) (5.54) (0.38)

E14/E29/E30 850 0.100 0.775±0.030 0.168 0.015 —

(2.54) (19.69±0.76) (4.27) (0.38)

E13/G13 –00H 100 0.250 0.312±0.062 0.187 0.093 1.500

(6.35) (7.93±1.57) (4.75) (2.36) (38.10)

E14/E29/E30†285 0.312 0.468±0.062 0.105 *** 0.050 0.821

(7.93) (11.89±1.57) (2.67) (1.27) (20.85)

E13/G13 –50H 65 0.343 0.281±0.062 0.187 0.140 1.750

(8.71) (7.14±1.57) (4.75) (3.56) (44.45)

E14/E29/E30†170 0.525 0.437±0.062 0.218 0.080 1.071

(13.34) (11.10±1.57) (5.54) (2.03) (27.20)

E13/G13 –00K 100 0.250 0.718±0.062 0.187 0.093 1.391

(6.35) (18.24±1.57) (4.75) (2.36) (35.33)

E14/E29/E30†285 0.348 0.860±0.062 0.130 0.045 0.688

(8.84) (21.84±1.57) (3.30) (1.14) (17.47)

E13/G13 –50K 63 0.403 0.687±0.062 0.187 0.093 1.625

(10.24) (17.45±1.57) (4.75) (2.36) (41.28)

E14/E29/E30†211 0.483 0.828±0.062 0.218 0.073 0.943

(12.27) (21.03±1.57) (5.54) (1.85) (23.95)

* Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance ±0.031 inches (0.79mm).

†E14, E29 and E30 actuators are shorter and formed up 11° at the button.

*** E30 minimum over-travel is 0.150 (3.81). G13 and E30 have operating point tolerances of ± 0.30.

Dimensions — Double Pole inches (mm) Actuators — Double Pole

Standard type integral hinged lever and

roller actuators are available in choice of

two mounting positions. Actuation lengths

are dimensioned from centerline of switch

mounting hole as shown.

“J” & “M” Type

Optional Hardware — Double Pole

Brass Hex Nut 0012-0023

Brass Knurled Nut 0012-0025

Brass Hex Nut 0012-0028

(Nickel-Plated)

Brass Knurled Nut 0012-0026

(Nickel-Plated)

Star Washer (Lock Washer) 0012-0073

Specifications subject to change without notice.

Ordering Information

Select the current rating you need. Combine

the corresponding Series/Prefix number

with the appropriate suffix number for the

switch you need. Note: Consult factory for

part number when ordering E19A switches.

Mounting — Double Pole

Recommended mounting screw: #6-32

round head. Recommended torque on

screw: 6 inch lbs. max. Recommended

maximum torque for ferrule: 20 inch pounds.

Circuitry — Double Pole

Contact arrangement available in choice of

single pole double throw or single pole sin-

gle throw, either normally open or normally

closed. In general, normally open may be

specified by changing suffix number from

00 to 01 and normally closed by changing

suffix number to 02.

Example: E19-00A is double throw,

E19-01A is normally open, and E19-02A

is normally closed.

Terminals — Double Pole

Standard 0.250″x 0.032″ (6.35mm x 0.81mm)

[Optional 0.187″x 0.032″ (4.75mm x 0.81mm)]

QC terminals can be furnished with angle

formed up or down on common as well as

open or closed terminal. Forms include

straight 30°, 45°, 85° up or down. Other

forms can be provided.

Actuator Specifications — Double Pole

Each Pole

Maximum Maximum Operating Minimum Max. Movement Actuation

Operating Pretravel Point* Overtravel Differential Length

Series/ Actuator Switch Force inches inches inches inches inches

Prefix Type Type (g) (mm) (mm) (mm) (mm) (mm)

E19/G20 –00A 850 0.050 0.285±0.030 0.080 0.015 —

(1.27) (7.24±0.76) (2.03) (0.38)

E20/E28 1280 0.100 0.248±0.030 0.050 0.015 —

(2.54) (6.30±0.76) (1.27) (0.38)

E19/G20 –-00J 850 0.050 0.670±0.030 0.080 0.015 —

(1.27) (17.02±0.76) (2.03) (0.38)

E20/E28†1280 0.100 0.630±0.030 0.050 0.015 —

(2.54) (16.00±0.76) (1.27) (0.38)

E19/G20 –00M 850 0.050 0.812±0.030 0.218 0.015 —

(1.27) (20.62±0.76) (5.54) (.038)

E20/E28†1280 0.100 0.774±0.030 0.188 0.015 —

(2.54) (19.66±0.76) (4.78) (0.38)

E19/G20 –00H 205 0.275 0.312±0.062 0.187 0.093 1.500

(6.99) (7.92±1.57) (4.75) (2.36) (38.10)

E20/E28†425 0.330 0.468±0.062 0.156 0.050 0.821

(8.38) (11.89±1.57) (3.96) (1.27) (20.85)

E19/G20 –50H 130 0.400 0.281±0.062 0.187 0.140 1.750

(10.16) (7.14±1.57) (4.75) (3.56) (44.45)

E20/E28†285 0.600 0.437±0.062 0.156 0.080 1.071

(15.24) (11.10±1.57) (3.96) (2.03) (27.20)

E19/G20 –00K 212 0.250 0.718±0.062 0.187 0.093 1.391

(6.35) (18.24±1.57) (4.75) (2.36) (35.33)

E20/E28†425 0.348 0.860±0.062 0.156 0.045 0.688

(8.84) (21.84±1.57) (3.96) (1.14) (17.48)

E19/G20 –50K 150 0.312 0.687±0.062 0.187 0.140 1.625

(7.92) (17.45±1.57) (4.75) (3.56) (41.28)

E20/E28†312 0.525 0.828±0.062 0.146 0.075 0.943

(13.34) (21.03±1.57) (3.71) (1.91) (23.95)

* Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance ±.0.031 inches (0.79mm).

†E20 and E28 actuators are shorter and formed up 15° at the button.

Contact factory for E25 specifications.