AMCA72-2R860G-02F-T
• Wireless application - WiMax bands.
• User Equipments (UE), e.g. dongles, modems
• User Equipments applications covering 2860MHz WiMax bands.
• Alternative to larger PCB solution
FEATURES: APPLICATIONS:
Surface Mount WiMAX Antenna (2860MHz)
Pb
7.0x 2.0 x 1.0mm
• 2860MHz, Bandwidth ≥200MHz
• Suitable for RoHS compliant reflow
• Gain 2.6dBi (Peak) / 0.7dBi (Average)
• VSWR <2:1
• Small size – 7.0 x 2.0 x 1.0mm (0.275 x 0.078 x 0.039inch)
• Non Ground Mounting type.
• Power Handling 3W Max
• Matched to 50 Ohm
STANDARD SPECIFICATIONS
RoHS / RoHS II Compliant
Moisture Sensitivity Level (MSL) – MSL = 1
PART IDENTIFICATION:
Maximum Ratings
Electrical Characteristics
Item Spec
Frequency 2860MHz
Bandwidth ≥200MHz
Peak Gain 2.7 dBi typ.
Average Gain 1.0 dBi typ
VSWR <2:1
Impedance 50 Ohm
Power Capability 3W max
Item Value
Operating Temperature Range -40ºC to + 85ºC
Storage Temperature Range -10ºC ~ +40 and RH ºC 70% (Max.)
AMCA72-2R8600G-02F-T4
Packaging
Blank: Bulk or Cut Tape
T4 : T/R 4000pcs per reel
5101 Hidden Creek Lane Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sale visit:
www.abracon.com
ABRACON IS
ISO9001-2008
CERTIFIED
REVISED: 05.17.2017
AMCA72-2R860G-02F-T
Pb
7.0x 2.0 x 1.0mm
RoHS / RoHS II Compliant
OUTLINE DIMENSIONS:
REFLOW PROFILE:
Surface Mount WLAN Antenna (2860MHz)
(Dimensions: mm)
Recommended Land Pattern
•Preheat condition: 150 ~200 /60~120ºC sec.
•Allowed time above 217ºC: 60~90sec.
•Max temp: 260ºC
•Max time at max temp: 10sec.
•Solder paste: Sn/3.0Ag/0.5Cu
•Allowed Reflow time: 2x max
[Note: The reflow profile in the above table is only for qualification and is not meant to specify board assembly
profiles. Actual board assembly profiles must be based on the customer's specific board design, solder paste and
process, and should not exceed the parameters as the Reflow profile shows.]
Pre-heating Temperature: 120ºC, 60 ºC ~ 300 sec.
•Iron soldering power: Max.30W.
•Pre-heating: 150 / 60 sec. ºC.
•Soldering Tip temperature: 350 Max. ºC.
•Soldering time: 3 sec Max.
•Solder paste: Sn/3.0Ag/0.5Cu.
•Max 1 times for iron soldering.
•Soldering Temperature: 340ºC±5ºC, 5sec max per each terminal.
[Note: Take care not to apply the tip of the soldering iron to the terminal electrodes.]
MANUAL SOLDERING
Series
A
B
C
D
E
F
G
H
I
AMCA72
7.0±0.2
2.0±0.2
1.0±0.2
0.5±0.2
2.0±0.2
1.5±0.2
1.0±0.2
6.0±0.2
1.4±0.2
5101 Hidden Creek Lane Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sale visit:
www.abracon.com
ABRACON IS
ISO9001-2008
CERTIFIED
REVISED: 05.17.2017
AMCA72-2R860G-02F-T
Pb
7.0x 2.0 x 1.0mm
RoHS / RoHS II Compliant
TAPE & REEL:
Packaging: 4000 Units per reel
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
(Dimensions: mm)
Surface Mount WLAN Antenna (2860MHz)
Note: The sprocket holes are to the right as the tape is pulled toward the user.
Reel Dimensions
Mounting Direction of Tape on Reel
Type Spec Dimensions (mm)
A W C B
AMCA72 13"*16mm 330±1 16.5±0.2 100±0.5 2.3±0.2
W 16.0±0.10 D0
1.50 +0.10 / -
0.0
P1
8.0±0.10
P0
4.0±0.10
E
1.75±0.10
K0
1.40±0.10
F
7.50±0.15
A0
2.30±0.10
B0
7.50±0.10
t
0.3±0.05
5101 Hidden Creek Lane Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sale visit:
www.abracon.com
ABRACON IS
ISO9001-2008
CERTIFIED
REVISED: 05.17.2017
