LRAT-1000 - FLUKE NETWORKS - Product.Network

Key features include:

Verification of Ethernet on copper or

fiber up to 1 GB/s

TruePower™ over Ethernet (PoE)

testing up to 802.3at (25.5W)

Cable testing and fault identification

IPv4/IPv6 ready

Powers up in 3 seconds

Stores up to 50 reports

Datasheet: LinkRunner™ AT

Network Auto-Tester

Network technicians and desktop support professionals are under ever-increasing pressure to

deploy new infrastructure and ensure user satisfaction.

To address these challenges, LinkRunner™ AT Network Auto-Tester provides the fastest way to

solve network connectivity problems. Powering up in under three seconds, its one-button

AutoTest performs your required set of connectivity tests in seconds, enabling you to quickly and

accurately identify and solve network problems.

Overview

LinkRunner AT provides the answers you need to quickly troubleshoot connectivity problems:

Where does this cable or jack go?

How is this switch port provisioned?

Can I negotiate a Gigabit link?

Are there 802.1x security conflicts?

Are the DHCP and DNS servers working?

Can I get enough power from this port?

Can I connect to servers and the Internet with IPv4 and IPv6?

Can I connect over copper or fiber links?

Is this patch cable good?

1 of 8

In seconds, the LinkRunner AutoTest provides these answers and more on a brightly colored display that's easy to read under desks or outdoors.

You can document your test results with two quick keystrokes to prove the job's done right. With a six hour battery life and rugged design,

LinkRunner can work wherever and whenever you need it.

LinkRunner AT Features

Instant-on operation — ready to run your first test in less than three seconds.

Get answers fast — user-defined AutoTest performs your required set of connectivity tests in seconds, enabling you to accurately and quickly

identify and solve network problems.

Verify connection at 10/100/1G over copper or 100/1G over fiber — connect using copper or fiber, turn it on to see link status, connection

type, signal strength and traffic.

Nearest switch and VLAN information — uses IEEE Link Layer Discovery Protocol (LLDP) plus the Cisco® and Extreme Discovery Protocols

(CDP and EDP) to display the VLAN and nearest switch model, slot and port.

TruePower™ PoE testing — quickly validate PoE performance by drawing actual power up to the 802.3at standard 25.5W. Load the circuit to

stress switches, cabling and patch panels, all while measuring the voltage and pairs being used. The ability to validate the TruePower delivery

before installing cameras, AP's and phones ensures smooth deployment.

802.1x authentication — verify access to secure networks using 802.1x and MAC Access Control Lists (ACL). The included LinkRunner

Manager software configures 802.1x EAP type, downloads certificates and enters passwords.

Cable verification and toning — check patch cables using the built-in wiremap port including pin-to-pin connection, or installed wiring for length,

shorts, opens or split pairs. The optional office locator kit allows identification of up to six unique ports for documenting cable plants.

IPv4/IPv6 ready — supports both IPv4 and IPv6.

Key device and application availability — instead of a ping, which is often blocked or disabled, LinkRunner performs a TCP port open test to

verify application connectivity using IPv4 and IPv6. Router, DNS and DHCP servers are reported.

Document results — store up to 50 complete test results and download to your PC with the push of a button.

Designed for field use — six-hour Li-ion battery life, one-handed operation and a rugged design.

Easy upgrades — the mini-USB port allows software upgrades in the field in minutes.

2 of 8

LinkRunner AT Functions

Graphical Cable Wiremap and Cable Details

Finds opens, shorts, mis-wires and split pairs on non-terminated cable with a WireView Cable

Identifier and built-in wiremap port.

Cable Tests

Locate cable runs with toning, port advertisement, link blinking and wiremapping with up to six

cable identifiers. Toning supports both analog and digital IntelliTone™ modes.

A mis-wired cable with pairs 1,2 and 7,8 swapped

using cable identifier #4

Switch Information

LinkRunner AT displays critical nearest switch information including:

Switch name and model

IP address

Port, slot and VLAN

Duplex and speed (actual and advertised)

Signal strength

Connection MDI or MDI/X

PoE voltage and power (actual and test limits)

Graphical representation of power on pairs

100 Mbps link on copper with PoE on port 23

1 Gig link on fiber

3 of 8

TruePower™ PoE Loading

Verify you are receiving the required current and voltage up to 25.5W to power your PoE

enabled devices. The LinkRunner TruePower PoE loading draws actual power to verify that

your PoE enabled devices will have the required power to function.

AutoTest

Verify enterprise connectivity in seconds with AutoTest. Standardize your set of critical

network tests in profiles to run every time. Tests include:

PoE (copper only) class

Link speed and duplex(actual and advertised)

RX pair and polarity

802.1x authentication

Switch name, port, VLAN, model and IP

DHCP auto-negotiation with subnet and DHCP server addresses

IPv4 and IPv6 availability

Ping and TCP port connectivity with lost and min, max and average speed

Ping and TCP Port Connectivity

Verify connectivity to key devices with ping and TCP connectivity testing. Devices

automatically include a router, DNS server and DHCP server. Configure 10 additional devices

to meet your requirements by URL or IPv4/ IPv6 address and optional application port

number.

Reflector

The LinkRunner packet reflector mode allows it to be used as a remote device during

throughput tests to validate LAN and WAN throughput capabilities. LinkRunner AT supports

packet reflection for:

OptiView XG Network Analysis Tablet

OneTouch™ AT Network Assistant

EtherScope™ Network Assistant

MetroScope™ Service Provider Assistant

4 of 8

LinkRunner Manager Software

Included with LinkRunner, the LinkRunner Manager software gives you the ability to manage LinkRunner profiles and manage recorded sessions.

Profiles

The Profiles feature allows you to standardize your critical tests into one or more profiles making it easy for staff to produce consistent test results.

For example, use one profile to verify connectivity to key devices or applications and another to verify connectivity to other locations. You can also

name and transfer up to 10 profiles between LinkRunner and your PC.

The Profiles feature also allows you to configure, manage and control the use of your LinkRunner—or an entire fleet of them—with the following

settings:

Enable IPv6 addressing

IP configuration including DHCP or static addresses

VLAN and connection configuration including 802.1x security, speed/duplex settings and VLAN ID and priority

AutoTest configuration for 10 devices

PoE configuration and loading

Reflector mode configuration

Record Test Results

Document what LinkRunner is seeing to share or archive. Creating reports allows you to quickly close trouble tickets or provide documentation for

problem escalation. Press one key to record all the collected details for:

AutoTest results

Switch results

Cable results

Transfer sessions to a PC and easily view or store them using LinkRunner Manager.

5 of 8

Multiple language support

LinkRunner AT fully supports multiple languages including English, French, German, Spanish, Portuguese, Russian, Japanese and Simplified

Chinese. Multi-language support includes LinkRunner AT user interface, getting started guide, user manual and supporting LinkRunner Manager

software, help files and user reports.

Gold Support

Sign up for the Gold Support plan and enjoy unrivaled privileges that support and protect your investment. These include unlimited tech

assistance seven days a week, 24 hours a day via phone or our website support center; free software upgrades; unlimited web-based training;

discounted pricing on instructor-led and custom onsite training; access to our extensive Knowledgebase library that includes operation and

applicationrelated technical articles; and Gold "members only" special pricing and promotions. Some benefits are not available in all countries.

See www.flukenetworks.com/goldsupport for more information.

LinkRunner AT 1000 LinkRunner AT 2000

AutoTest ✓ ✓

10/100/1G Copper ✓ ✓

Color Display ✓ ✓

Key Devices & TCP Connectivity ✓ ✓

Verify 802.1x Settings ✓ ✓

Identify Switch Ports and VLANs ✓ ✓

PoE Voltages ✓ ✓

IPv4 Support ✓ ✓

Graphical, Color Wiremap and Cable Details ✓ ✓

3-hour Battery Life (AA Battery Pack) ✓Optional

6-hour Battery Life (Li-Ion Battery) Optional ✓

WireView Cable Identifier #1 Optional ✓

Reports 10 50

100/1G Fiber ✓

IPv6 Support ✓

TruePower PoE Loading ✓

Reflector Option ✓

6 of 8

Technical Specifications

Enviromental

Operating Temperature and Relative Humidity

32ºF to 113ºF (0ºC to +45ºC)

Note: The Li-ion battery will not charge if the internal temperature of the tester is above 113ºF

(45ºC)

Operating Relative Humidity (% RH without condensation) 90% (50ºF to 95ºF; 10ºC to 35ºC)

75% (95ºF to 113ºF; 35ºC to 45ºC)

Storage Temperature -4ºF to 140ºF (-20ºC to +60ºC)

Shock and Vibration Random, 2 g, 5 Hz-500 Hz (Class 2) 1 m drop

Safety EN 61010-1 2nd edition

Safety(LR-AT 2000 only) EN/IEC 60825-1:2007, EN/IEC 60825-2:2004+ A1:2007 (LRAT- 2000 only)

Altitude 4,000 m; Storage: 12,000 m

EMC FCC Part 15 Class A, EN 61326-1

Certifications and Compliance

Conforms to relevant European Union directives

Conforms to relevant Australian standards

Listed by the Canadian Standards Association

General

Media Access; Copper RJ-45: 10BASE-T, 100BASE-TX, 1000BASE-T and PoE (IEEE 802.3af and 802.3at)

Media Access; Fiber SFP Adapter Port supports 100BASE-FX and 1000BASE-LX/SX/ZX (LRAT-2000 Only)

Cable Tests Pair lengths, opens, shorts, splits, crossed, straight through and cable ID

Tone Generator IntelliTone digital tone: [500 KHz]; analog tones: [400 Hz, 1 KHz]

Dimensions 3.5 in x 7.8 in x 1.9 in (8.9 cm x 19.8 cm x 4.8 cm)

Weight 18 oz (0.5 kg)

Li-ion Battery Removable, rechargeable li-ion battery pack (18.5 Watt-hrs). Typical operating life is 6 hours;

Typical charge time is 3 hours

AA Battery Removable AA battery pack. Typical operating life is 3 hours

External AC Adapter/Charger AC input 90 to 264 Vac 48 to 62 Hz input power DC output 15 Vdc at 2 amps (li-ion battery

pack only)

Display 2.8 in color LCD (320 x 240 pixels)

Keypad 12-key elastomeric

LEDs 2 LEDs (Link and Receive/Transmit indicators)

Host Interface USB 5-pin mini-B

7 of 8

LinkRunner Manager Software

Supported Operating System Windows® Vista, Windows® XP, Windows® 7

Processor 400 MHz Pentium processor or equivalent (minimum); 1 GHz Pentium processor or equivalent

(recommended)

RAM 96 MB (minimum); 256 MB (recommended)

Hard Disk Up to 500 MB of available space may be required

Display 1024 x 768 high color, 32-bit (recommended)

Ordering Guide

Item Name Description

LRAT-2000 Includes LinkRunner AT 2000 with Li-ion battery, Wireview Cable ID #1, LinkRunner Manager software CD, USB cable,

RJ45 coupler, Getting Started Guide and soft case.

ACK-LRAT2000

Includes AirCheck™ tester, LinkRunner AT 2000 tester, AirCheck external directional antenna, spare Li-ion battery for

either AirCheck or LinkRunner, IntelliTone Pro 200 probe, WireView 2-6 cable ids, LinkRunner AT holster, AirCheck holster

and deluxe carrying case.

LRAT-2000-FTK Includes LinkRunner AT 2000, SimpliFiber® Pro optical power meter, 850/1300 multimode source, VisiFault™ VFL, FT120

FiberViewer™, FindFiber™ Remote ID source, carrying case and SC, ST, and LC power meter adapters.

LRAT-2000-KIT Includes LinkRunner AT 2000, IntelliTone™ Pro 200 Probe, WireView Cable IDs #1-6 and deluxe carrying case.

LRAT2-CIQ-GSV LinkRunner AT 2000/CableIQ Gigabit Service Kit Includes: LinkRunner AT 2000, CableIQ Qualification Tester, IntelliTone

Pro 200 Probe, CableIQ Remote Identifiers #1-7 and deluxe carrying case

LRAT-2000-5PK Includes 5 LRAT-2000s and 5 WireView 2-6 cable id sets.

Note: Available only in the US, Canada and Europe.

LRAT-2000-10PK Includes 11 LRAT-2000s and 11 WireView 2-6 cable id sets.

Note: Available only in the US, Canada and Europe.

CIQ-GSV2 Includes CableIQ™ Qualification Tester, LinkRunner AT 1000, IntelliTone Pro 200 Probe, CableIQ Remote Identifiers #1-7

and deluxe carrying case

LRAT-1000 Includes LinkRunner AT 1000 tester with AA battery pack, 4 AA batteries, LinkRunner Manager software CD, USB cable,

Getting Started Guide and soft case.

GLD-LRAT LinkRunner Gold Support Services, 1 yr.

For a complete listing of LinkRunner AT models and accessories, visit www.flukenetworks.com/LinkRunnerAT

Fluke Networks operates in more than 50 countries worldwide.

To find your local office contact details, go to www.flukenetworks.com/contact.

8 of 8