Data brief
For further information contact your local STMicroelectronics sales office.
March 2011 Doc ID 018498 Rev 1 1/3
3
STM3220G-EVAL
STM3220G-EVAL evaluation board
Features
■16 Mbit SRAM
■1 Gbyte or more MicroSD card
■Boot from user Flash, system memory or
SRAM
■Both ISO/IEC 14443 type A and B smartcard
support
■I2C compatible serial interface 64 Kbit
EEPROM, MEMS and I/O expander
■IEEE 802.3-2002 compliant ethernet connector
■Two CAN 2.0 A/B channels on the same DB
connector
■RS-232 communication
■IrDA transceiver
■USB OTG (HS and FS) with Micro-AB
connector
■Inductor motor control connector
■I2S Audio DAC, stereo audio jack for headset
■3.2" 240x320 TFT color LCD with touch screen
■4 color LEDs
■Camera module and extension connector for
ST camera plug-in
■Joystick with 4-direction control and selector
■Reset, wakeup, tamper and user button
■RTC with backup battery
■Extension connector for daughterboard or
wrapping board
■JTAG, SW and trace debug support
■Embedded ST-LINK/V2
■Five 5V power supply options: Power jack,
USB FS connector, USB HS connector,
ST-LINK/V2 or daughterboard
Description
The STM3220G-EVAL evaluation board is a
complete demonstration and development
platform for the STM32 F-2 series and includes
an embedded STM32F207IGH6 high-
performance ARM®Cortex™-M3 32-bit
microcontroller.
The full range of hardware features on the board
is provided to help you evaluate all peripherals
(USB OTG HS, USB OTG FS, ethernet, motor
control, CAN, MicroSD card, smartcard, USART,
Audio DAC, RS-232, IrDA, SRAM, MEMS,
EEPROM… etc.) and develop your own
applications.
The in-circuit ST-LINK/V2 tool can be easily used
for JTAG and SWD interface debugging and
programming.
www.st.com
Demonstration software STM3220G-EVAL
2/3 Doc ID 018498 Rev 1
1 Demonstration software
Demonstration software is preloaded in the board's Flash memory for easy demonstration of
the device peripherals in standalone mode. For more information and to download the latest
version available, please refer to STM3220G-EVAL demonstration software available on
web: www.st.com/mcu.
2 Ordering information
3 Revision history
Table 1. Device summary
Order code Reference
STM3220G-EVAL STM3220G-EVAL evaluation board
Table 2. Document revision history
Date Revision Changes
24-Mar-2011 1 Initial release.
STM3220G-EVAL
Doc ID 018498 Rev 1 3/3
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2011 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
