66260 6 PIN GULL WING PROTON RADIATION TOLERANT OPTOCOUPLER OPTOELECTRONIC PRODUCTS DIVISION 10/04/2012 Features: Applications: High Reliability Base lead provided for conventional transistor biasing Rugged package Stability over wide temperature +1000V electrical isolation Eliminate ground loops Level shifting Line receiver Switching power supplies Motor control DESCRIPTION The 66260 is a single channel device electrically similar to the 4N48. This product has been designed to be more tolerant to proton radiation. The 66260 optocoupler is packaged in a hermetically sealed 6 pin gull wing package. This device can be supplied to customer specifications as well as tested and screened to the requirements of MIL-PRF-19500 up to space (JANS) level. ABSOLUTE MAXIMUM RATINGS Input to Output Voltage .......................................................................................................................................................... 1 kV Emitter-Base Voltage ............................................................................................................................................................... 7 V Collector-Emitter Voltage (Value applies to emitter-base open-circuited & the input-diode equal to zero) ........................ 60 V Collector-Base Voltage .......................................................................................................................................................... 60 V Reverse Input Voltage ............................................................................................................................................................ 7 V Input Diode Continuous Forward Current at (or below) 65C Free-Air Temperature (see note 1) .................................. 50 mA Peak Forward Input Current (Value applies for tw 1s, PRR < 300 pps) ............................................................................ 1 A Continuous Collector Current ............................................................................................................................................. 50 mA Continuous Transistor Power Dissipation at (or below) 25C Free-Air Temperature (see Note 2) ............................... 300 mW Storage Temperature......................................................................................................................................... -55C to +150C Operating Free-Air Temperature Range ............................................................................................................-55C to +100C Lead Solder Temperature (10 seconds max.) .................................................................................................................. 240C Notes: 1. Derate linearly to 100C free-air temperature at the rate of 0.80 mA/C above 65C. 2. Derate linearly to 100C free-air temperature at the rate of 3 mW/C above 25C. Package Dimensions Schematic Diagram 0.350 0.010 0.270 PIN 1 0.050 0.100 0.0150.002 0.015 6E A1 0.193 0.130 0.040 4C 0.046 0.010 5B K3 0.008 MAX 75 MIN. ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE NOTED. ALL TOLERANCES ARE 0.005 UNLESS OTHERWISE NOTED. A - ANODE B - BASE C - COLLECTOR E - EMITTER K - CATHODE MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION 725 E.Walnut St., Garland, TX 75040 (972)272-3571 Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 66260 6 PIN GULL WING PROTON RADIATION TOLERANT OPTOCOUPLER 10/04/2012 ELECTRICAL CHARACTERISTICS TA = 25C unless otherwise specified. PARAMETER SYMBOL Input Diode Static Reverse Current MIN TYP IR Input Diode Static Forward Voltage -55C Input Diode Static Forward Voltage Input Diode Static Forward Voltage VF 1.0 +25C VF 0.8 +100C VF 0.8 1.8 MAX UNITS TEST CONDITIONS 100 A VR = 3 V 2.2 V IF = 10 mA 2.0 V IF = 10 mA 2.2 V IF = 10 mA MAX NOTE OUTPUT TRANSISTOR TA = 25C unless otherwise specified. SYMBOL MIN UNITS TEST CONDITIONS Collector-Base Breakdown Voltage PARAMETER V(BR)CBO 45 V IC = 100 A, IB = 0, IF = 0 Collector-Emitter Breakdown Voltage V(BR)CEO 40 V IC = 1mA, IB = 0, IF = 0 Emitter-Base Breakdown Voltage V(BR)EBO 7 V IC = 0 mA, IE = 100 A, IF = 0 Off-State Collector Current +100C TYP ICEO 100 nA VCE = 20 V, IF = 0 mA, IB = 0 ICEO 100 A VCE = 20 V, IF = 0 mA, IB = 0 MAX NOTE COUPLED CHARACTERISTICS TA = 25C unless otherwise specified. PARAMETER SYMBOL MIN UNITS TEST CONDITIONS IC(ON) 1.0 mA VCE = 5 V, IF = 1mA, IB = 0 On State Collector Current TYP On State Collector Current +100C IC(ON) 1.0 mA VCE = 5.0 V, IF = 2 mA, IB = 0 On State Collector Current -55C IC(ON) 1.0 mA VCE = 5 V, IF = 2 mA, IB = 0 V IF = 2 mA, IC= 1 mA Collector-Emitter Saturation Voltage VCE(SAT) Input to Output Internal Resistance RIO 0.3 Input to Output Capacitance CIO 2.5 Rise Time-Phototransistor Operation tr Fall Time-Phototransistor Operation tf 11 NOTE VIN-OUT = 1000 V 1 5 pF f = 1MHz, VIN-OUT = 1000 V 1 5 10 s 5 10 s 10 VCC = 10 V, IF = 10 mA, RL = 100 , IB = 0 VCC = 10 V, IF = 10 mA, RL = 100 , IB = 0 NOTES: 1. These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together. 2. This parameter must be measured using pulse techniques (tW = 100 s duty cycle 1%). RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN Input Current, Low Level IFL 0 90 A Input Current, High Level IFH 1 10 mA Supply Voltage VCE 5 10 TA -55 100 Operating Temperature MAX UNITS V C SELECTION GUIDE PART NUMBER PART DESCRIPTION 66260-001 Commercial 66260-101 Screened to JAN Level 66260-103 Screened to JANTX Level 66260-105 Screened to JANTXV Level 66260-300 Screened to JANS Level MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION 725 E.Walnut St., Garland, TX 75040 (972)272-3571 Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM