Features Regulated Converters * * * * * * 2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 90% Six-Sided Continuous Shield Available as Power Module (RPM30-E) Description The RP30-E series DC/DC converters are certified to UL 60950-1 and cUL 60950-1. This makes them ideal for all telecom and industrial applications where approved safety standards are required. The industry standard 2" x 1.6" package meets military standards for thermal shock and vibration tolerance DC/DC Converter RP30-E 30 Watt Single & Dual Output 3Y EAR 3 wa rranty Selection Guide Part Number RP30-123.3SE(3,4) RP30-1205SE(3,4) RP30-1212SE(3,4) RP30-1215SE(3,4) RP30-243.3SE(3,4) RP30-2405SE(3,4) RP30-2412SE(3,4) RP30-2415SE(3,4) RP30-483.3SE(3,4) RP30-4805SE(3,4) RP30-4812SE(3,4) RP30-4815SE(3,4) RP30-1212DE(3,4) RP30-1215DE(3,4) RP30-2412DE(3,4) RP30-2415DE(3,4) RP30-4812DE(3,4) RP30-4815DE(3,4) Input Voltage Range [VDC] 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 36-75 36-75 36-75 36-75 9-18 9-18 18-36 18-36 36-75 36-75 Output Voltage [VDC] 3.3 5 12 15 3.3 5 12 15 3.3 5 12 15 12 15 12 15 12 15 Output Current [mA] 6000 6000 2500 2000 6000 6000 2500 2000 6000 6000 2500 2000 1250 1000 1250 1000 1250 1000 Input(1) Efficiency(1) Current typ. [mA] [%] 1941 85 2874 87 2841 88 2841 88 959 86 1420 88 1404 89 1404 89 474 87 702 89 694 90 694 90 2874 87 2874 87 1420 88 1420 88 710 88 710 88 Max. Capacitive Load(2) [F] 19500 10200 3240 1100 19500 10200 3240 1100 19500 10200 3240 1100 1020 675 1020 675 1020 675 Notes: Note1: Maximum value at nominal input voltage and full load of standard type. Note2: Test by minimum Vin and constant resistor load. E196683 UL60950-1 Certified Model Numbering RP30-__ __ _E/_ _ Input Voltage Output Voltage Package(4) Control Logic(3) Single or Dual Ordering Examples RP30-2405SE = 24V Input, 5V Output, Positive Logic CTRL pin. RP30-4812DE-HC = 48V Input, 12V Output, Positive Logic CTRL pin, Heat-sink fitted Notes: Note3: no suffix for CTRL function with Positive Logic (1=ON, 0=OFF) Note4: add suffix -HC for premounted Heat-sink and clips www.recom-power.com REV.: 1/2016 PD-1 RP30-E DC/DC Converter Series Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted BASIC CHARACTERISTICS Parameter Input Voltage Range Under Voltage Lockout (UVLO) Condition Min. Typ. Max. nom. Vin= 12V nom. Vin= 24V nom. Vin= 48V 9VDC 18VDC 36VDC 12VDC 24VDC 48VDC 18VDC 36VDC 75VDC Vin = 12V DC-DC ON DC-DC OFF 8VDC 9VDC Vin = 24V DC-DC ON DC-DC OFF 16VDC Vin = 48V DC-DC ON DC-DC OFF 33VDC 17.8VDC 36VDC Input Filter(5) L-C Type Input Reflected Ripple Current nominal Vin and full load Input Surge Voltage Vin= 12V, 100ms max. Vin= 24V, 100ms max. Vin= 48V, 100ms max. (6) 30mAp-p 36VDC 50VDC 100VDC Power up Remote ON/OFF Start-up time 25ms 25ms Operating Frequency Range 270kHz Minimum Load 330kHz 0% 3.3Vout, 5Vout measured by 20MHz bandwidth 12Vout, 15Vout with a 0.1F/50V MLCC Dual all Ripple and Noise Remote ON/OFF(7) Positive Logic 100mVp-p DC-DC ON DC-DC OFF Open or 3.0V < Vr < 12V Short or 0V < Vr < 1.2V 2.5mA DC-DC ON Notes: Note5: Note6: Note7: RP30-1205SE 50mVp-p 75mVp-p DC-DC OFF Input current of Remote pin (CTRL) -0.5mA 0.5mA An external filter capacitor is required for normal operation. The capacitor should be capable of handling 1A ripple current for 48V/24V models. RECOM suggest: Nippon chemi-con KY series, 220F/100V, ESR 90m . Simulated source impedance of 12H. 12H inductor in series with +Vin. The ON/OFF control pin voltage is referenced to -Vin pin Efficiency vs. Output Current Efficiency vs. Input Voltage 95 90 85 90 85 80 75 Efficiency [%] Efficiency [%] 300kHz 70 65 60 55 9Vin 12Vin 18Vin 50 45 40 10 20 30 40 50 60 70 80 90 80 75 70 65 60 100 Output Current [%] 9 10 11 12 13 14 15 16 17 18 Input Voltage [VDC] continued on next page PD-2 REV.: 1/2016 www.recom-power.com RP30-E DC/DC Converter Series Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted RP30-2405SE Efficiency vs. Output Current Efficiency vs. Input Voltage 95 95 90 90 80 85 Efficiency [%] Efficiency [%] 85 75 70 65 60 55 18Vin 24Vin 36Vin 50 45 40 10 20 30 40 50 60 70 80 90 80 75 70 65 60 100 18 20 22 Output Current [%] 24 26 28 30 32 34 36 72 75 Input Voltage [VDC] RP30-4805SE Efficiency vs. Output Current Efficiency vs. Input Voltage 95 95 90 90 80 85 Efficiency [%] Efficiency [%] 85 75 70 65 60 55 36Vin 48Vin 75Vin 50 45 40 10 20 30 40 50 60 70 80 90 80 75 70 65 60 100 36 Output Current [%] 40 44 48 52 56 60 64 68 Input Voltage [VDC] REGULATIONS Parameter Condition Output Voltage Accuracy 1% Voltage Adjustability Line Voltage Regulation Load Voltage Regulation Cross Regulation Transient Response recovery time Value 10% low line to high line at Single full load Dual 0.2% 0.5% Single Dual 0.5% 1.0% no load to full load asymmetrical 25%<>100% load 25% load step change 5% 300s typ. continued on next page www.recom-power.com REV.: 1/2016 PD-3 RP30-E DC/DC Converter Series Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted External Output Trimming Output Voltage Trimming Single output Powerline converters offer the feature of trimming the output voltage over a certain range around the nominal value by using external trim resistors. No general equation can be given for calculating the trim resistors, but the following trimtables give typical values for chosing these trimming resistors. If voltages between the given trim points are required, extrapolate between the two nearest given values to work out the resis tor required or use a variable resistor to set the output voltage. Output can be externally trimmed by using the method shown below. Trim up Trim down 7(7) 8(8) RU 8(8) RD 6(5) RP30-xx3.3SE Trim up 1 2 3 4 5 6 7 8 9 10 Vout = 3.333 3.366 3.399 3.432 3.465 3.498 3.531 3.564 3.597 3.63 Volts RU = 57.93 26.16 15.58 10.28 7.11 4.99 3.48 2.34 1.46 0.75 KOhms Trim down % 1 2 3 4 5 6 7 8 9 10 Vout = 3.267 3.234 3.201 3.168 3.135 3.102 3.069 3.036 3.003 2.97 % Volts RD = 69.47 31.23 18.49 12.12 8.29 5.74 3.92 2.56 1.50 0.65 KOhms 2 3 4 5 6 7 8 9 10 RP30-xx05SE Trim up 1 % Vout = 5.05 5.10 5.15 5.20 5.25 5.30 5.35 5.4 5.45 5.50 Volts RU = 36.57 16.58 9.92 6.58 4.59 3.25 2.30 1.59 1.03 0.59 KOhms 1 2 3 4 5 6 7 8 9 10 Trim down % Vout = 4.95 4.90 4.85 4.80 4.75 4.70 4.65 4.60 4.55 4.50 Volts RD = 45.53 20.61 12.31 8.15 5.66 4.00 2.81 1.92 1.23 0.68 KOhms 2 3 4 5 6 7 8 9 10 RP30-xx12SE Trim up 1 % Vout = 12.12 12.24 12.36 12.48 12.60 12.72 12.84 12.96 13.08 13.20 Volts RU = 367.91 165.95 98.64 64.98 44.78 31.32 21.70 14.49 8.88 4.39 KOhms 1 2 3 4 5 6 7 8 9 10 Trim down % Vout = 11.88 11.76 11.64 11.52 11.40 11.28 11.16 11.04 10.92 10.8 Volts RD = 460.99 207.95 123.60 81.42 56.12 39.25 27.20 18.16 11.13 5.51 KOhms RP30-xx15SE Trim up 1 2 3 4 5 6 7 8 9 10 Vout = 15.15 15.3 15.45 15.60 15.75 15.90 16.05 16.20 16.35 16.50 Volts RU = 404.18 180.59 106.06 68.80 46.44 31.53 20.88 12.90 6.69 1.72 KOhms Trim down % 1 2 3 4 5 6 7 8 9 10 Vout = 14.85 14.70 14.55 14.40 14.25 14.10 13.95 13.80 13.65 13.50 % Volts RD = 499.82 223.41 131.27 85.20 57.56 39.14 25.97 16.10 8.42 2.282 KOhms continued on next page PD-4 REV.: 1/2016 www.recom-power.com RP30-E DC/DC Converter Series Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted Dual Output Voltage Trim Tables RP30-xx12DE Trim up 1 2 3 4 5 6 7 8 9 10 Vout = 24.24 24.48 24.72 24.96 25.20 25.44 25.68 25.92 26.16 26.40 Volts RU = 218.21 98.10 58.07 38.05 26.04 18.03 12.32 8.03 4.69 2.02 KOhms Trim down % 1 2 3 4 5 6 7 8 9 10 Vout = 23.76 23.52 23.28 23.04 22.80 22.56 22.32 22.08 21.84 21.6 % Volts RD = 273.44 123.02 72.87 47.80 32.76 22.73 15.57 10.20 6.02 2.67 KOhms 2 3 4 5 6 7 8 9 10 RP30-xx15DE Trim up 1 % Vout = 30.30 30.60 30.90 31.20 31.50 31.80 32.10 32.40 32.70 33.00 Volts RU = 268.29 120.64 71.43 46.82 32.06 22.21 15.10 9.91 5.81 2.53 KOhms 1 2 3 4 5 6 7 8 9 10 Trim down % Vout = 29.70 29.40 29.10 28.80 28.50 28.20 27.90 27.60 27.30 27.00 Volts RD = 337.71 152.02 90.13 59.18 40.61 28.23 19.39 12.76 7.60 3.47 KOhms PROTECTIONS Parameter Condition Short Circuit Protection (SCP) Continuous, automatic recovery 3.3Vout 5Vout Zener Diode Clamp 12Vout 15Vout Over Voltage Protection (OVP) Over Load Protection (OLP) % of Iout rated Over Temperature Protection (OTP) Isolation Voltage Isolation Resistance Value 3.9VDC 6.2VDC 15VDC 18VDC 150% typ. 115C typ. I/P to O/P I/P to O/P to case 500VDC Isolation Capacitance 1.6kVDC/ 1 minute 1.6kVDC/ 1 minute 1G min. 1000pF max. Notes: Note8: This power module is not internally fused. An input line fuse must always be used. ENVIRONMENTAL Parameter Operating Temperature Range Condition without derating with derating Maximum Case Temperature -40C to +70C -40C to +100C +100C Temperature Coefficient Thermal Impedance Value 0.02%/C max. Natural convection (20LFM) Natural convection (20LFM) with Heat Sink Operating Humidity 10C/Watt 8.24C/Watt 5% - 95% RH Thermal Shock MIL-STD-810F Vibration MIL-STD-810F MTBF MIL-HDBK-217F Bellcore TR-NWT-000332(10) 1283 x 103 hours 1535 x 103 hours continued on next page www.recom-power.com REV.: 1/2016 PD-5 RP30-E DC/DC Converter Series Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted Derating Graph(11) RP30-483.3SE RP30-483.3SE with Heat-sink 80 80 Output Power [%] 100 Output Power [%] 100 60 40 20 0 -40 -20 0 20 40 60 70 80 60 40 20 0 -40 100 120 Ambient Temperature [C] -20 0 20 40 60 80 76 100 120 Ambient Temperature [C] Notes: Note10: BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40C (Ground fixed and controlled environment). Note11: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part number not shown here please contact our technical support service at techsupportAT@recom-power.com SAFETY AND CERTIFICATIONS Report / File Number UL General Safety Standard UL60950-1 1st. Ed.: 2003 C22.2 No. 60950 1st. Ed.: 2003 E196683 EMC Compliance Condition EMI Standard Standard / Criterion with external filter (12) ESD Radiated Immunity Fast Transient(13) Surge(13) Conducted Immunity EN55022, Class A, Class B Air 8kV and Contact 6kC 10 V/m 2kV 1kV 10 Vr.m.s Fuse C3 +VOUT +VIN Input C1 EN61000-4-2, Criteria B EN61000-4-3, Criteria A EN61000-4-4, Criteria B EN61000-4-5, Criteria B EN61000-4-6, Criteria A DC C2 Notes: DC Note10: The standard modues meet EMI Class A or Class B with external components, see filter suggestions below. -V -VIN Note11: An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Recom suggests: Nippon chemi-con KY series, 220F/100V LOAD Certificate Type (Safety) OUT C4 EMI Filtering Class A C3 C3 Fuse Input DC C2 +VOUT +VIN C1 LOAD C1 Input LOAD +VOUT +VIN DC C2 COM DC DC -VOUT -VOUT LOAD Fuse -VIN -VIN C4 C4 continued on next page C3 PD-6 REV.: 1/2016 Fuse +VOUT +VIN DC OAD Input www.recom-power.com RP30-E DC/DC Converter Series Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted C1 C2 C3/C4 RP30-12xxSE RP30-12xxDE 6.8F/50V 1812 MLCC N/A 1000pF/2kV 1808 MLCC RP30-24xxSE RP30-24xxDE 6.8F/50V 1812 MLCC Fuse N/A RP30-48xxSE RP30-48xxDE L1 Input 2.2F/100V 1812 MLCC N/A C1 C5 1000pF/2kV 1808 MLCC +VIN +VOUT DC 1000pF/2kV C4 C3 1808 MLCC C2 LOAD MODEL DC -VOUT -VIN EMI Filtering Class B C6 C5 C5 C2 C3 C4 DC C1 LOAD C1 +VOUT +VIN Input DC LOAD Input L1 Fuse +VOUT +VIN C2 C3 C4 COM DC LOAD L1 Fuse DC -VOUT -VOUT -VIN -VIN C6 C6 C5 Input RP30-12xxSE C1 C2 C1 4.7F/50V 1812 MLCC C3 RP30-24xxSE 6.8F/50V 1812 MLCC RP30-48xxSE 2.2F/100V 1812 MLCC C2 C3 +VOUT +VIN N/ADC C4 C4 C5/C6 L1 N/A 1000pF/2kV 1808 MLCC CMC: 450H ref.: WE 7448227005 ref.: CMC-05 6.8F/50V 1812 MLCC N/A 1000pF/2kV 1808 MLCC CMC: 450H ref.: WE 7448227005 ref.: CMC-05 2.2F/100V 1812 MLCC 2.2F/100V 1812 MLCC 1000pF/2kV 1808 MLCC CMC: 450H ref.: WE 7448227005 ref.: CMC-05 4.7F/50V 1812 MLCC LOAD L1 Fuse COM DC -VIN N/A -VOUT C6 2.2F/100V 1812 MLCC LOAD MODEL DIMENSIONS and PHYSICAL CHARACTERISTICS Parameter Type Value Material Case Base Potting Nickel coated copper FR4 PCB Epoxy (UL94-V0) Package Dimensions (LxWxH) Package Weight without Heat-sink with Heat-sink 50.8 x 40.6 x 10.2mm 56.8 x 40.6 x 17.0mm without Heat-sink with Heat-sink 48g 65.78 continued on next page www.recom-power.com REV.: 1/2016 PD-7 RP30-E DC/DC Converter Series Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted Dimension Drawing (mm) 40.6 5.60 10.2 50.8 O1.00 45.70 10.20 12.70 6 1 Bottom View 15.20 2 7 4 10.20 17.80 5.10 17.80 5 Pin Connections Pin # 8 1 Dimension Drawing (mm) with Heat-sink Single Dual +Vin +Vin 2 -Vin -Vin 4 CTRL CTRL 5 No Pin +Vout 6 +Vout Com 7 -Vout -Vout 8 Trim Trim Pin Pitch Tolerance 0.25mm Pin Dimension Tolerance 0.1mm Tolerance: X.X 0.5mm X.XX 0.25mm 50.00 1.40 37.25 Top View Heat-sink 1.60 40.6 10.2 17.0 5.85 1.40 56.8 PD-8 5.60 o1.00 REV.: 1/2016 www.recom-power.com RP30-E DC/DC Converter Series Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted PACKAGING INFORMATION Parameter Packaging Quantity Type without Heat-sink Tube with Heat-sink Tray Storage Temperature Range Value 5pcs. 15pcs. -55C to +125C Storage Humidity 5% - 95% RH The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM's explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 1/2016 PD-9 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: RECOM: RP30-1205SE RP30-1205SE-HC RP30-1212DE RP30-1212DE-HC RP30-1212SE RP30-1212SE-HC RP301215DE RP30-1215DE-HC RP30-1215SE RP30-1215SE-HC RP30-123.3SE RP30-123.3SE-HC RP30-2405SE RP30-2405SE-HC RP30-2412DE RP30-2412DE-HC RP30-2412SE RP30-2412SE-HC RP30-2415DE RP302415DE-HC RP30-2415SE RP30-2415SE-HC RP30-243.3SE RP30-243.3SE-HC RP30-4805SE RP30-4805SE-HC RP30-4812DE RP30-4812DE-HC RP30-4812SE RP30-4812SE-HC RP30-4815DE RP30-4815DE-HC RP304815SE RP30-4815SE-HC RP30-483.3SE RP30-483.3SE-HC