SPECIFICATION CONTROL DRAWING MATERIALS 1. SEALING/STRAIN RELEIF SLEEVE: Heat-shrinkable, radiation cross-linked polyolefin with hot-melt adhesive liner. Color: black. 2. SOLDERSHIELD: INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. SHIELD: Solder impregnated, flux coated copper wire braid. SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROM1 per ANSI-J-STD-004. SEALING RINGS: Fluorocarbon-based thermoplastic. 3. SEALING SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. Qty: 2/kit MELTABLE RINGS: Fluorocarbon-based thermoplastic. 4. CRIMP SPLICE: Tin plated copper alloy. Color code: red. Qty: 2/kit BASE METAL: Copper Alloy 101 or 102 per ASTM B-75. PLATING: Tin per MIL-T-10727, Type 1. APPLICATION 1. This kit is one of four available from Raychem for making environment resistant in-line splices in tin-plated shields, 24 or 22 AWG tin-plated primaries and a temperature rating of at least 125C. Kit Number Primary Splice Style Cable Type D-150-0167 Mini-Seal Crimp Single Shielded 2. Splices will meet performance requirements of U. S. Air Force Specification Control Drawing 8340708 when installed in accordance with Raychem Process Standard RCPS-150-01. 307 Constitution Drive Menlo Park, CA 94025, USA Wire and Harnessing Products Unless otherwise specified dimensions are in millimeters. Inches dimensions are in between brackets. Tyco Electronics reserves the right to ANGLES: N/A TOLERANCES: amend this drawing at any time. Users 0.00 N/A should evaluate the suitability of the ROUGHNESS IN 0.0 N/A product for their application. MICRON 0 N/A TITLE : SOLDERSHIELD SPLICE KIT, SINGLE SHIELDED DATA BUS CABLE, MINI-SEAL CRIMP PRIMARY SPLICE DOCUMENT NO.: D-150-0167 DCR NUMBER: REPLACES: D010124 DRAWN BY: DATE: PROD. REV. DOC ISSUE: M. FORONDA 5/29/01 B 1 If this document is printed it becomes uncontrolled. Check for the latest revision. SCALE: None N/A SIZE: A SHEET: 1 of 1