SIL06C Series 5 Vin and 12 Vin single output DC-DC CONVERTERS * * * * * * * * C Class Non-isolated 1 NEW Product 6 A current rating Input voltage range: 4.5 Vdc to 5.5 Vdc or 10.2 Vdc to 13.8 Vdc Output voltage range: 0.9 Vdc to 5.0 Vdc Industry leading value * Cost optimised design Excellent transient response Output Voltage adjustability * Pathway for future upgrades * Supports silicon voltage migration * Resulting in reduced design-in and qualification time Designed in reliability: MTBF of >7 million hrs per Telcordia SR-332 Available RoHS compliant The SIL06C series is a new high density open frame non-isolated converter for space sensitive applications. Each model has a wide input range (4.5 Vdc to 5.5 Vdc or 10.2 Vdc to 13.8 Vdc) and offer a wide 0.9 Vdc to 5 Vdc output voltage range with a 6 A load. An external resistor adjusts the output voltage from its pre-set value of 0.9 V to any value up to the 5 V maximum. Typical efficiencies for the models are 89% for the 5 V input version and 91% for the 12 V input version. The SIL06C series offers remote ON/OFF and overcurrent protection as standard. With full international safety approval including EN60950 and UL/cUL60950, the SIL06C reduces compliance costs and time to market. 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25 C unless otherwise stated OUTPUT SPECIFICATIONS Voltage adjustability (See Note 7) INPUT SPECIFICATIONS (CONTD.) 5 V input models 12 V input models Output setpoint accuracy With 1.0% trim resistors 0.9-3.3 Vdc 0.9-5.0 Vdc 2.5% Line regulation Low line to high line 0.2% max. Load regulation Full load to min. load 0.5% max. Min./max. load Overshoot (at turn on) 0 A/6 A 5 V input models 12 V input models Undershoot 3.0% max. 1.0% max. 100 mV max. Turn ON threshold 5 Vin 12 Vin 4.5 Vdc 9.0 Vdc Turn OFF threshold 5 Vin 12 Vin 4.3 Vdc 7.5 Vdc GENERAL SPECIFICATIONS Efficiency See Table Switching frequency Fixed Approvals and standards (See Note 4) Ripple and noise 5 Hz to 20 MHz (See Note 2) See table Material flammability Transient response (See Note 1) Deviation Weight 75 mV 150 s recovery to within regulation band TUV Product Services IEC60950, UL/cUL60950 UL94V-0 9.3 g (0.3 oz) MTBF Telcordia SR-332 7,562,142 hours ENVIRONMENTAL SPECIFICATIONS INPUT SPECIFICATIONS Input voltage range 5 V input model 12 V input model Input current No load Remote OFF Input current (max.) (See Note 9) 5 V input model 12 V input model 5.1 A @ Io max. 1.6 A @ Io max. Input reflected ripple (See Note 2) 5 V input model 12 V input model 52 mA (pk-pk) 56 mA (pk-pk) Remote ON/OFF Logic compatibility ON OFF Start-up time (See Note 3) 200 kHz 4.5-5.5 Vdc 10.2-13.8 Vdc 50 mA 5 mA Active high >2.4 Vdc <0.8 Vdc Power up Remote ON/OFF <20 ms <20 ms Thermal performance (See Note 8) Operating ambient, temperature Non-operating 0 C to +80 C -40 C to +125 C PROTECTION Short-circuit protection Hiccup, non-latching RECOMMENDED SYSTEM CAPACITANCE Input capacitance Output capacitance (See Note 11) (See Note 11) 270 F/20 m esr max. 680 F/10 m esr max. International Safety Standard Approvals UL/cUL CAN/CSA 22.2 No. E139421 UL60950 File No. E139421 TUV Product Service (EN60950) Certificate No. B 04 08 19870 228 CB report and certificate to IEC60950 File Name: sil06c.pdf Rev (02): 16 Dec 2005 SIL06C Series 5 Vin and 12 Vin single output DC-DC CONVERTERS C Class Non-isolated 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT POWER (MAX.) INPUT VOLTAGE OVP OUTPUT OUTPUT CURRENT VOLTAGE(12) (MIN.) 20 W 4.5-5.5 Vdc N/A 0.9-3.3 Vdc 30 W 10.2-13.8 Vdc N/A 0.9-5.0 Vdc Part Number System with Options NEW Product OUTPUT CURRENT (MAX.) EFFICIENCY (TYP.) LINE LOAD MODEL NUMBER (5,13,14,15) 0A 6A 89% 0.2% 0.5% SIL06C-05SADJ-VJ 0A 6A 91% 0.2% 0.5% SIL06C-12SADJ-VJ REGULATION SIL06C-12SADJ-VJ Packaging Options (14) J = Pb-free (RoHS 6/6 compliant) Product Family SIL = Single in Line Mounting Option V = Vertical Mount H = Horizontal Mount Rated Output Current 06 = 6 Amps Performance C = Cost Optimised Number of Outputs SADJ = Single Adjustable Output Input Voltage 05 = 4.5 Vdc to 5.5 Vdc 12 = 10.2 Vdc to 13.8 Vdc Output Voltage Adjustment of the SIL06C Series The ultra-wide output voltage trim range offers major advantages to users who select the SIL06C series. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SIL06C series converter leaves the factory the output has been adjusted to the default voltage of 0.9 V Notes Notes condt. 1 8 9 10 11 12 2 3 4 5 6 7 di/dt = 10 A/s, Vin = Nom, Tc = 25 C, load change = 0.5 lo max. to 0.75 lo max. and 0.75 lo max. to 0.5 lo max. Measured with external filter. See Application Note 131 for details. Power up is the time from application of dc input to Power Good enabled. Remote ON/OFF is from ON/OFF asserted high to Power Good enabled This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. The standard unit with the suffix '-V' is for vertical mounting. To order a unit with horizontal mounting, please add the suffix '-H' to the model number, e.g. SIL06C-05SADJ-HJ. Measured as per recommended set-up. Cin = 270 F (20 m esr max.). Cout = 680 F (10 m esr max.). Uses external resistor from trim to output ground. Minimum value 485 for 5 V model, 280 for 12 V model. See Applications Note 131 for details. Signal line assumed <3 m. External input fusing recommended. See Application Note 131 for operation above 50 C. See Application Note 131 for more details. These models have a wide trim output. 5 Vin has an output of 0.9 Vdc to 3.3 Vdc and 12 Vin has an output of 0.9 Vdc to 5 Vdc. An external resistor adjusts the output voltage. 13 To order a unit with a pin length of 0.150", please add suffix `P4' to the model number, e.g. SIL06C-05SADJ-HP4J. 14 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 15 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. Ripple and Noise Specification Output Voltage Pk - Pk RMS 5 V input models 0.9-2.5 Vdc 3.3 Vdc 30 mV 40 mV 15 mV 15 mV 12 V input models 0.9-2.5 Vdc 3.3-5 dcV 40 mV 50 mV 20 mV 20 mV Model File Name: sil06c.pdf Rev (02): 16 Dec 2005 SIL06C Series 5 Vin and 12 Vin single output C Class Non-isolated 3 NEW Product 0.120 (3.05) 9 Places 0.610 (15.49) 0.530 (15.01) 1.200 (30.48) 0.150 (3.81) Ref 0.062 (1.57) PCB Ref 0.315 (8.00) max For the most current data and application support visit www.artesyn.com/powergroup/products.htm 0.040 (1.02) DC-DC CONVERTERS 0.050 (1.27) 0.025 0.001 (0.64) Typ. 0.025 Pin 1 0.015 (0.38) 0.150 (3.80) 0.527 (13.38) Pin 8 5X 0.100 (2.54) FUNCTION 1 Vout 2 Trim 3 Ground 4 Power Good 5 Remote ON/OFF 6 Vin 7 Mechanical support 8 Mechanical support 9 Mechanical support on horizontal version only Mechanical Support Pin 0.025 0.001 (0.64) Typ. 0.025 All dimensions in INCHES (mm) General tolerance 0.01in (0.25mm) except where specified otherwise Figure 1: Mechanical Drawing - Horizontal Mount Version 0.315 (8.00) max. 0.610 (15.49) 0.070 (1.78) 1.200 (30.48) Pin 8 Pin 1 0.025 0.001 (0.64) Typ. 0.025 0.050 (1.27) 0.150 (3.81) 0.062 (1.57) Ref. 0.150 (3.81) 8 Places PIN NUMBER 0.950 (24.13) 0.040 (1.02) Ref. PIN CONNECTIONS 5X 0.100 (2.54) 0.050 (1.27) Typ. 0.025 0.001 (0.64) Typ. 0.025 0.950 (24.13) All dimensions in inches (mm) General tolerance 0.01in (0.25mm) except where specified otherwise Figure 2: Mechanical Drawing - Vertical Mount Version Datasheet (c) Artesyn Technologies(R) 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note Longform Data Sheet www.artesyn.com File Name: sil06c.pdf Rev (02): 16 Dec 2005