This is information on a product in full production.
April 2015 DocID026323 Rev 2 1/19
STGIPS15C60T-H
SLLIMM™ small low-loss intelligent molded module
IPM, 3-phase inverter - 15 A, 600 V short-circuit rugged IGBT
Datasheet
-
production data
Features
•IPM 15 A, 600 V 3-phase IGBT inverter bridge
including control ICs for gate driving and free-
wheeling diodes
•Short-circuit rugged IGBTs
•3.3 V, 5 V, 15 V CMOS/TTL inputs
comparators with hysteresis and pull-down /
pull-up resistors
•Undervoltage lockout
•Internal bootstrap diode
•Interlocking function
•Shutdown function
•4.7 kΩ NTC for temperature control
•DBC leading to low thermal resistance
•Isolation rating of 2500 V
rms
/min
•UL recognized: UL1557 file E81734
Applications
•3-phase inverters for motor drives
•Home appliance, air conditioners
Description
This intelligent power module provides a
compact, high performance AC motor drive in a
simple, rugged design. Combining ST proprietary
control ICs with the most advanced short-circuit-
rugged IGBT system technology, this device is
ideal for 3-phase inverters in applications such as
motor drives and air conditioners. SLLIMM™ is a
trademark of STMicroelectronics.
SDIP-25L
Table 1. Device summary
Order code Marking Package Packing
STGIPS15C60T-H GIPS15C60T-H SDIP-25L Tube
www.st.com
Contents STGIPS15C60T-H
2/19 DocID026323 Rev 2
Contents
1 Internal block diagram and pin configuration . . . . . . . . . . . . . . . . . . . . 3
2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2 Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3.1 Control part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.1.1 NTC thermistor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.2 Waveform definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4 Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.1 Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5.1 SDIP-25L p ackage information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5.2 Packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
DocID026323 Rev 2 3/19
STGIPS15C60T-H Internal b lock diagra m and pin configuration
19
1 Internal block diagram and pin configuration
Figure 1. Internal block diagram
AM09320v2
Internal block diagram and pin configuration STGIPS15C60T-H
4/19 DocID026323 Rev 2
Figure 2. Pin layout (bottom view)
Table 2. Pin description
Pin n° Symbol Description
1OUT
U
High-side reference output for U phase
2V
bootU
Bootstrap voltage for U phase
3LIN
U
Low-side logic input for U phase
4HIN
U
High-side logic input for U phase
5V
CC
Low voltage power supply
6OUT
V
High-side reference output for V phase
7V
boot V
Bootstrap voltage for V phase
8 GND Ground
9LIN
V
Low-side logic input for V phase
10 HIN
V
High-si de log ic input for V phase
11 OUT
W
High-side reference output for W phase
12 V
boot W
Bootstrap voltage for W phase
13 LIN
W
Low-side logic input for W phase
14 HIN
W
High-side logic input for W phase
15 SD Shutdown logic input (active low)
16 T1 NTC thermistor terminal
17 N
W
Negative DC input for W phase
18 W W phase output
19 P Positive D C input
20 N
V
Negative DC input for V phase
21 V V phase output
22 P Positive D C input
23 N
U
Negative DC input for U phase
24 U U phase output
25 P Positive D C input
0$5.,1*$5($
DocID026323 Rev 2 5/19
STGIPS15C60T-H Electrical ratings
19
2 Electrical ratings
2.1 Absolute maximum ratings
Table 3. Inverter part
Symbol Parameter Value Unit
V
PN
Supply voltage applied between P - N
U
, N
V
, N
W
450 V
V
PN(surge)
Supply voltage (surge) applied between P - N
U
,
N
V
, N
W
500 V
V
CES
Each IGBT collector emitter voltage (V
IN(1)
= 0 V)
1. Applied between HIN
i
, LIN
i and
GND
for i = U , V, W
600 V
± I
C
Each IGBT continuous collector current
at T
C
= 25°C 15 A
± I
CP (2)
2. Pulse width limited by max junction temperature
Each IGBT pulsed collector current 30 A
P
TOT
Each IGBT total dissipation at T
C
= 25°C 42 W
t
scw
Short circuit withstand time, V
CE
= 0.5 V
(BR)CES
T
J
= 125 °C, V
CC
= V
boot
= 15 V, V
IN (1)
= 0 - 5 V 5µs
Table 4. Control part
Symbol Parameter Value Unit
V
OUT
Out put voltage appl ied between
OUT
U,
OUT
V,
OUT
W
- GND V
boot
- 21 to V
boot
+ 0.3 V
V
CC
Low voltage power supply - 0.3 to +21 V
V
boot
Bootstrap voltage applied between
V
boot i
- OUT
i
for i = U, V, W - 0.3 to 620 V
V
IN
Logic in put vol tage a pplied b etween HIN, LIN and
GND - 0.3 to 15 V
V
SD
Open drain voltage - 0.3 to 15 V
dV
OUT
/dt Allowed outp ut sle w rate 50 V/ns
Table 5. Total system
Symbol Parameter Value Unit
V
ISO
Isolation withstand voltage applied between each
pin and heatsink plate (AC voltage, t = 60 s) 2500 V
T
j
Power chips operating junction temperature - 40 to 150 °C
T
C
Module case operation temperature - 40 to 125 °C
Electrical ratings STGIPS15C60T-H
6/19 DocID026323 Rev 2
2.2 Thermal data
Table 6. Thermal data
Symbol Parameter Value Unit
R
thJC
Thermal resis t an ce jun cti on -cas e si ngl e IGBT 3 ° C/W
Thermal resis t an ce jun cti on -cas e si ngl e diod e 5.5 °C/W
DocID026323 Rev 2 7/19
STGIPS1 5C60 T -H Electri cal character istics
19
3 Electrical characteristics
T
J
= 25 °C unless otherwise specified.
Note: tON and tOFF include the propagation delay time of the internal drive. tC(ON) and tC(OFF)
are the switching time of IGBT itself under the internally given gate driving condition.
Table 7. Inverter p art
Symbol Parameter Test condition s Value Unit
Min. Typ. Max.
V
CE(sat)
Collector-emitter
saturati on vol t age
V
CC
= V
boot
= 15 V, V
IN(1)
= 0 - 5 V,
I
C
= 15 A -1.6 2 V
V
CC
= V
boot
= 15 V, V
IN(1)
= 0 - 5 V,
I
C
= 15 A, T
J
= 125 °C -1.7
I
CES
Collector-cut off current
(V
IN(1)
= 0 “logic state”) V
CE
= 550 V, V
CC
= V
Boot
= 15 V - 100 µA
V
F
Diode forward voltage V
IN(1)
= 0 “logic state”, I
C
= 15 A - 2.3 V
Inductive load switching time and energy
t
on
Turn-on time
V
PN
= 300 V,
V
CC
= V
boot
= 15 V,
V
IN(1)
= 0 - 5 V,
I
C
= 15 A
(see Figure 3)
-330 -
ns
t
c(on)
Crossover time (on) - 150 -
t
off
Turn-off time - 925 -
t
c(off)
Crossover time (off) - 135 -
t
rr
Rever se r ec ove ry tim e - 190 -
E
on
Turn-on switching losses - 385 - µJ
E
off
Turn-off switching losses - 294 -
1. Applied between HIN
i
, LIN
i and
GND
for i = U, V, W.
Electrical characteristics STGIPS15C60T-H
8/19 DocID026323 Rev 2
Figure 3. Switching time test circuit
Figure 4. Switching time definition
Note: Figure 4 “Switching time definition" refers to HIN, LIN inputs (active high).
AM17138v1
VBOOT>VCC
RSD L
IC
VCE
+5V
VCC
INPUT
01
BUS
Lin
/SD
Hin
Vcc
DT LVG
HVG
OUT
BOOT
CP+GND
V
CE
I
C
I
C
V
IN
t
ON
t
C(ON)
VIN(ON) 10% IC 90% IC 10% VCE
(a) turn-on (b) turn-off
t
rr
100% IC 100% IC
V
IN
V
CE
t
OFF
t
C(OFF)
VIN(OFF) 10% VCE 10% IC
AM09223V1
DocID026323 Rev 2 9/19
STGIPS1 5C60 T -H Electri cal character istics
19
3.1 Control part
Table 8. Low voltage power supply (V
CC
= 15 V unless otherwise specified)
Symbol Parameter Test conditions Min. Typ. Max. Unit
V
CC_hys
V
CC
UV hysteresis 1.2 1.5 1.8 V
V
CC_thON
V
CC
UV turn ON threshold 11.5 12 12.5 V
V
CC_thOFF
V
CC
UV turn OFF threshold 10 10.5 11 V
I
qccu
Undervoltage quiescent
supply current V
CC
= 10 V
SD = 5 V; LIN = HIN = 0 450 µA
I
qcc
Quiescent current V
CC
= 15 V
SD = 5 V; LIN = HIN = 0 3.5 mA
Table 9. Bootstrapped voltage (V
CC
= 15 V unless otherwise specified)
Symbol Parameter Test conditions Min. Ty p. Max. Unit
V
BS_hys
V
BS
UV
hysteresis 1.2 1.5 1.8 V
V
BS_thON
V
BS
UV
turn ON threshold 11.1 11.5 12.1 V
V
BS_thOFF
V
BS
UV
turn OFF threshold 9.8 10 10.6 V
I
QBSU
Undervoltage V
BS
quiescent
current V
BS
< 9 V
SD = 5 V; LIN = 0; HIN = 5 V 70 110 µA
I
QBS
V
BS
quiescent curr ent V
BS
= 15 V
SD = 5 V; LIN = 0; HIN = 5 V 200 300 µA
R
DS(on)
Bootstrap driver on resistance LIN= 5 V; HIN= 0 V 120
Ω
Table 10. Logic inputs (V
CC
= 15 V unless otherwise specified)
Symbol Parameter Test conditions Min. Ty p. Max. Unit
V
il
Low level logic threshold
voltage 0.8 1.1 V
V
ih
High level logic th reshold
voltage 1.9 2.25 V
I
HINh
HIN logic “1” input bias current HIN = 15 V 20 40 100 µA
I
HINI
HIN logic “0” input bias current HIN = 0 V 1 µA
I
LINh
LIN logic “1” input bias current LIN = 15 V 20 40 100 µA
I
LINI
LIN logic “0” input bias current LIN = 0V 1 µA
I
SDh
SD logic “0” input bias current SD = 15 V 30 120 300 µA
I
SDl
SD logic “1” input bias current SD = 0 V 3 µA
Dt Dead time s ee Figure 7 and Table 14 1.2 µs
Electrical characteristics STGIPS15C60T-H
10/19 DocID026323 Rev 2
Note: X: don’t care
Table 11. Shutdown characteristics (V
CC
= 15 V unless otherwise specified)
Symbol Parameter Test conditions Min. Ty p. Max. Unit
t
sd
Shut down to high / low side
driver propagation delay V
OUT
= 0, V
boot
= V
CC
,
VIN
= 0 to 3.3 V 50 125 200 ns
Table 12. Truth table
Condition Logic input (V
I
) Output
SD/OD LIN HIN LVG HVG
Shutdown enable
half-brid ge tri-s tate LXXLL
Interlocking
half-brid ge tri-s tate HHHLL
0 ‘’logic state”
half-brid ge tri-s tate HLLLL
1 “logic state”
low side direct driving HHLHL
1 “logic state”
high side direct driving HLHLH
DocID026323 Rev 2 11/19
STGIPS1 5C60 T -H Electri cal character istics
19
3.1.1 NTC thermistor
Equation 1: resistance variation vs. temperature
Where T are temperatures in Kelvins
Figure 5. NTC resistance vs. temperature
Figure 6. NTC resistance vs. temperature (zoom)
Table 13. NTC thermistor
Symbol Parameter Test conditions Min. Typ. Max. Unit.
R
25
Resistance T
= 25°C 4.7 kΩ
R
125
Resistance T
= 125°C 160 Ω
B B-constant T
= 25°C to 85°C 3950 K
T Operating temperature -40 150 °C
RT() R
25
e
B1
T
--- 1
298
----------–
⋅=
AM16299v1
0
20
40
60
80
100
120
140
160
180
-40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 (°C)
NTC [kΩ]
MIN.
MAX.
CENTER
AM17098v1
(°C)
NTC [kΩ
]
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145
MIN.
MAX.
CENTER
Electrical characteristics STGIPS15C60T-H
12/19 DocID026323 Rev 2
3.2 Waveform definitions
Figure 7. Dead time and interlocking waveforms definition
INTERLOCKING
INTERLOCKING
INTERLOCKING
INTERLOCKING
G
DocID026323 Rev 2 13/19
STGIPS15C60T-H Application information
19
4 Application information
Figure 8. Typical application circuit
AM09321v2
Application information STGIPS15C60T-H
14/19 DocID026323 Rev 2
4.1 Recommendations
•Input signals HIN, LIN are active high logic. A 375 kΩ (typ.) pull down resistor is built-in
for each input. If an external RC filter is used, for noise immunity, pay attention to the
variation of the input signal level.
•To prevent the input signals oscillation, the wiring of each input should be as short as
possible.
•By integrating an application specific type HVIC inside the module, direct coupling to MCU
terminals without any opto-coupler is possible.
•Each capacitor should be located as nearby the pins of IPM as possible.
•Low inductance shunt resistors should be used for phase leg current sensing.
•Electrolytic bus capacitors should be mounted as close to the module bus terminals as
possible. Additional high frequency ceramic capacitor mounted close to the module pins
will further improve performance.
•The SD signal should be pulled up to 5 V / 3.3 V with an external resistor.
Note: For further details refer to AN3338.
Table 14. Recommended operating conditions
Symbol Parameter Conditions Value Unit
Min. Typ. Max.
V
PN
Supply Voltage Applied between P-Nu,Nv,Nw 300 400 V
V
CC
Control supply voltage Applied between V
CC
-GND 13.5 15 18 V
V
BS
High side bias voltage Applied between V
BOOTi
-OUT
i
for
i=U,V,W 13 18 V
t
dead
Blanking time to
prevent Arm-short For each input signal 1.5 µs
f
PWM
PWM input signal -40°C < T
c
< 100°C
-40°C < T
j
< 125°C 20 kHz
T
C
Case operation
temperature 100 °C
DocID026323 Rev 2 15/19
STGIPS15C60T-H Package information
19
5 Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK
®
is an ST trademark.
Please refer to dedicated technical note TN0107 for mounting instructions.
5.1 SDIP-25L package information
Figure 9. SDIP-25L package outline
B
Package information STGIPS15C60T-H
16/19 DocID026323 Rev 2
Table 15. SDIP-25L mechanical data
Dim. mm
Min. Typ. Max.
A 43.90 44.40 44.90
A1 1.15 1.35 1.55
A2 1.40 1.60 1.80
A3 38.90 39.40 39.90
B 21.50 22.00 22.50
B1 11.25 11.85 12.45
B2 24.83 25.23 25.63
C 5.00 5.40 6.00
C1 6.50 7.00 7.50
C2 11.20 11.70 12.20
C3 2.90 3.00 3.10
e 2.15 2.35 2.55
e1 3.40 3.60 3.80
e2 4.50 4.70 4.90
e3 6.30 6.50 6.70
D 33.30
D1 5.55
E11.20
E1 1.40
F 0.85 1.00 1.15
F1 0.35 0.50 0.65
R 1.55 1.75 1.95
T 0.45 0.55 0.65
V0° 6°
DocID026323 Rev 2 17/19
STGIPS15C60T-H Package information
19
5.2 Packing information
Figure 10. SDIP-25L packing information
AM10488v1
Base quantity: 11 pcs
Bulk quantity: 132 pcs
8123127_E
Revision history STGIPS15C60T-H
18/19 DocID026323 Rev 2
6 Revision history
Table 16. Document revision histor y
Date Revision Changes
19-May-2014 1Initial rele as e.
09-Apr-2015 2 Text edits and formatting changes throughout document
Updated Figure 2: Pin layout (bottom view)
Updated Section 5: Package information
DocID026323 Rev 2 19/19
STGIPS15C60T-H
19
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, correc tions, enhanc ements, modifications, and
improveme nts to ST product s and/o r to this do cument at any time without not ice. Purcha sers should o bta in the latest relevant in format ion on
ST products before placing orders. ST produc ts are sold pursuant to ST ’s terms and conditions of sale in place at t he time of order
acknowledgement.
Purchase rs are s olely r espon si ble for t he cho ic e, selec tion, a nd use of ST pro duc ts and ST assume s no l i abil ity f or applic ation as sist anc e or
the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST pr oducts with provis ions different fro m the information set forth herein sha ll void any warranty gra nted by ST for suc h product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document su persedes and replac es information previously supplied in any prior versions of this document.
© 2015 STMicroelectronics – All rights reserved
