29 Journey • Aliso Viejo, CA 92656 • USA
(949) 448-7070 • FAX: (949) 448-8484
E-MAIL:abinfo@abracon.com • INTERNET ADDRESS: www.abracon.com
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
CORPORATION
ABRACON
®
ASXPT - Temperature - Overall Frequency Stability - Stand By - Packaging
ORDERING OPTIONS
ORDERING OPTIONS
5 Vdc or 3.3 Vdc • MINIATURE CERAMIC SURF ACE MOUNT • HCMOS OR TTL
PROGRAMMABLE CLOCK OSCILLATORS
ASLPand ASVP
APPLICATIONS:
• Clocks for a wide range of a applications.
FEATURES:
• Wide range of frequency up to 125 MHz using PLL Technology • Reflow soldering
• Quick delivery within one to five days. • Tristate E /D or Stand - By function .
• Ultra miniature low profile SMD package. • Hermetically seam welded.
STANDARD SPECIFICATIONS
STANDARD SPECIFICATIONS
Frequency Range (Fo)1.00 MHz - 125 MHz 1.00 MHz - 100 MHz
Operating Temperature
(TOPR) -20°C to + 70°C
( see option)
Storage Temperature (TSTO) -55°C to + 125°C
Frequency Stability (
D
F/Fo)
±100 ppm max. ( see option)
Supply Voltage (V
dd)5.0 Vdc ± 10%
+
3.3 Vdc ± 10%
Input Current
(I
dd) 45 mA max. 25 mA max.
Duty Cycle or Symmetry 45/55% max.at 1/2 VDD 45/55% max.at 1.4 VDC 45/55% max.at 1/2 VDD
Rise and Fall Times (TR/ TF) 4 ns max.
Output Load 15 pF max. 5TTL 15 pF max.
Output Voltage
(V
OH) 0.9 *
V
dd min. 2.4 V min. 0.7 *
V
dd min.
(V
OL) 0.4
V
max. 0.4 V max. 0.2 * Vdd max.
Start-up Time (TOSC) 10 ms max.
Tristate (OE) Funtion
VIH: 2.0V min. Oscillation VIH: 0.7*VDDmin.
VIL: 0.8V max. Hi Impedance VIH: 0.2*VDDmax.
Disable current (IDIS) 30mA max. 15mA max.
Stand - By current (ISTB) 50µA max. 20µA max.
Jilter
Peak to peak
RMS One sigma
PARAMETERS ASLP ASLPT ASVP
± 250ps max. for F<=40MHz, ±90ps typ.
± 100ps max. for F> 40MHz, ±50ps typ.
± 50ps max. for F<=40MHz, ±25ps typ.
± 30ps max. for F> 40MHz, ±15ps typ.
± 250ps max. for
F<=40MHz, ±90ps typ.
± 100ps max. for
F> 40MHz, ±50ps typ.
± 50ps max. for
F<=40MHz, ±25ps typ.
± 100ps max. for
F>40MHz, ±20ps typ.
L or V T or Blank -B T for Tape and Reel
( *) Pin 1 has internal pull-up resistor , which allow Pin 1 to be left floating ( enable high).
Connect a By-Pass capacitor 0.01
m
F between Vdd and GND. See page 60.Environmental and mechanical specifications
found on page 68, Group 2.
For test circuit, waveforms, please see page 67.
Tape and Reel, (1,000 pcs./reel) see pages 74-75. Marking, see page 78.
-C for ±50ppm max (*)-L for -40
°C to +85°C
* Standard temperature only. Please call us for other tighter spec.
