HLMP-7000, -7019, -7040
T-13/4 (5 mm), T-1 (3 mm), Low
Current LED Lamps
Technical Data
Features
• Low Power
• High Efficiency
• CMOS-MOS Compatible
• TTL Compatible
• Wide Viewing Angle
• Choice of Package Styles
• Choice of Colors
Applications
• Low Power DC Circuits
• Telecommunications
Indicators
• Portable Equipment
• Keyboard Indicators
Description
These tinted diffused LED lamps
are designed and optimized
specifically for low DC current
operation. Luminous intensity and
forward voltage are tested at
2 mA to assure consistent bright-
ness at TTL output current levels.
Package Dimensions
HLMP-4700, -4719, -4740
HLMP-1700, -1719, -1790
AB
HLMP-1700, -1719, -1790HLMP-4700, -4719, -4740
2
Note:
1. θ1/2 is the typical off-axis angle at which the luminous intensity is half the axial luminous intensity.
Selection Guide
Luminous Intensity Iv (mcd)
at 2 mA Package
Package Description Color Device HLMP- Min. Typ. Max. 2θ1/2 Outline
T-1 3/4 Tinted Diffused Red 4700 1.5 2.3 – 50 A
4700-C00xx 1.5 2.3 –
4700-CD0xx 1.3 2.3 4.2
Yellow 4719 0.9 2.1 –
4719-A00xx 0.9 2.1 –
4719-BC0xx 1.4 2.5 4.4
4719-BCBxx 1.4 2.5 4.4
Green 4740 1.0 2.3 –
4740-A00xx 1.0 2.3 –
4740-AB0xx 1.0 2.3 3.2
T-1 Tinted Diffused Red 1700 0.8 2.1 – 50 B
1700-B0000 0.8 2.1 –
1700-CD000 1.3 2.3 4.2
Yellow 1719 0.9 2.1 –
1719-A0000 0.9 2.1 –
1719-AB000 0.9 2.1 2.8
1719-ABB00 0.9 2.1 2.8
Green 1790 1.0 2.3 –
1790-A0000 1.0 2.3 –
1790-AB000 1.0 2.4 3.2
3
Part Numbering System
HLMP-X 7 XX X X X XX
Mechanical Option
00: Bulk
01: Tape & Reel, Crimped Leads
02, BH: Tape & Reel, Straight Leads
A1, B1: Right Angle Housing, Uneven Leads
A2, B2: Right Angle Housing, Even Leads
R1: Tape & Reel, Crimped Leads, Counter Clockwise
Color Bin Options
0: Full color bin distribution
B: Color bins 2 & 3 only
Maximum Iv Bin Options
0: Open (No. max. limit)
Others: Please refer to the Iv bin Table
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Color Option
00: GaP HER
19: GaP Yellow
40: GaP Green
Package Options
4: T-13/4 (5 mm)
1: T-1 (3 mm)
4
Electrical/Optical Characteristics at TA = 25°C
Test
Symbol Description T-13/4T-1 Min. Typ. Max. Units Conditions
VFForward Voltage 4700 1700 1.7 2.0 V 2 mA
4719 1719 1.8 2.5
4740 1790 1.9 2.2
VRReverse Breakdown 4700 1700 5.0 V IR = 50 µA
Voltage 4719 1719 5.0
4740 1790 5.0
λdDominant 4700 1700 626 nm Note 1
Wavelength 4719 1719 585
4740 1790 569
∆λ1/2 Spectral Line 4700 1700 40 nm
Halfwidth 4719 1719 36
4740 1790 28
τSSpeed of Response 4700 1700 90 ns
4719 1719 90
4740 1790 500
C Capacitance 4700 1700 11 pF VF = 0,
4719 1719 15 f = 1 MHz
4740 1790 18
RθJ-PIN Thermal 4700 1700 260[3] °C/W Junction to
Resistance 4719 1719 290[4] Cathode Lead
4740 1790
λPEAK Peak Wavelength 4700 1700 635 nm Measurement
4719 1719 583 at peak
4740 1790 565
ηVLuminous Efficacy 4700 1700 145 lumens Note 2
4719 1719 500 watt
4740 1790 595
Notes:
1. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
color of the device.
2. The radiant intensity, Ie, in watts per steradian, may be found from the equation Ie = IV/ηV, where IV is the luminous intensity in
candelas and ηV is luminous efficacy in lumens/watt.
3. T-13/4.
4. T-1.
5
Absolute Maximum Ratings
Parameter Maximum Rating Units
Power Dissipation Red 24 mW
(Derate linearly from 92°C at 1.0 mA/°C) Yellow 36
Green 24
DC and Peak Forward Current 7 mA
Transient Forward Current (10 µs Pulse)[1] 500 mA
Reverse Voltage (IR = 50 µA) 5.0 V
Operating Temperature Range Red/Yellow -55°C to 100°C
Green -20°C to 100°C
Storage Temperature Range -55°C to +100°C
Lead Soldering Temperature 260°C for 5 seconds
[1.6 mm (0.063 in.) from body]
Note:
1. The transient peak current is the maximum non-recurring peak current the devices can withstand without damaging the LED die and
wire bonds. It is not recommended that the device be operated at peak currents beyond the Absolute Maximum Peak Forward Current.
Figure 2. Forward Current vs. Forward Voltage. Figure 3. Relative Luminous Intensity vs. Forward Current.
Figure 1. Relative Intensity vs. Wavelength.
DC CURRENT – mA
0
0
VOLTAGE – V
1.5
6
0.5 1.0 2.5
2
4
8
10
2.0
RED
YELLOW
GREEN
6
Figure 5. Relative Luminous Intensity vs. Angular
Displacement for T-1 Lamp.
Figure 4. Relative Luminous Intensity vs. Angular
Displacement for T-13/4 Lamp.
Intensity Bin Limits
Intensity Range (mcd)
Color Bin Min. Max.
Red B 0.9 1.5
C 1.5 2.4
D 2.4 3.8
E 3.8 6.1
F 6.1 9.7
G 9.7 15.5
H 15.5 24.8
I 24.8 39.6
J 39.6 63.4
K 63.4 101.5
L 101.5 162.4
M 162.4 234.6
N 234.6 340.0
O 340.0 540.0
P 540.0 850.0
Q 850.0 1200.0
R 1200.0 1700.0
S 1700.0 2400.0
T 2400.0 3400.0
U 3400.0 4900.0
V 4900.0 7100.0
W 7100.0 10200.0
X 10200.0 14800.0
Y 14800.0 21400.0
Z 21400.0 30900.0
Maximum tolerance for each bin limit is ±18%.
7
Intensity Bin Limits, continued
Intensity Range (mcd)
Color Bin Min. Max.
Yellow A 1.0 1.6
B 1.6 2.5
C 2.5 4.0
D 4.0 6.5
E 6.5 10.3
F 10.3 16.6
G 16.6 26.5
H 26.5 42.3
I 42.3 67.7
J 67.7 108.2
K 108.2 173.2
L 173.2 250.0
M 250.0 360.0
N 360.0 510.0
O 510.0 800.0
P 800.0 1250.0
Q 1250.0 1800.0
R 1800.0 2900.0
S 2900.0 4700.0
T 4700.0 7200.0
U 7200.0 11700.0
V 11700.0 18000.0
W 18000.0 27000.0
Maximum tolerance for each bin limit is ±18%.
8
Intensity Bin Limits, continued
Intensity Range (mcd)
Color Bin Min. Max.
Green A 1.1 1.8
B 1.8 2.9
C 2.9 4.7
D 4.7 7.6
E 7.6 12.0
F 12.0 19.1
G 19.1 30.7
H 30.7 49.1
I 49.1 78.5
J 78.5 125.7
K 125.7 201.1
L 201.1 289.0
M 289.0 417.0
N 417.0 680.0
O 680.0 1100.0
P 1100.0 1800.0
Q 1800.0 2700.0
R 2700.0 4300.0
S 4300.0 6800.0
T 6800.0 10800.0
U 10800.0 16000.0
V 16000.0 25000.0
W 25000.0 40000.0
Maximum tolerance for each bin limit is ±18%.
9
Color Categories
Lambda (nm)
Color Category # Min. Max.
6 561.5 564.5
5 564.5 567.5
Green 4 567.5 570.5
3 570.5 573.5
2 573.5 576.5
1 582.0 584.5
3 584.5 587.0
Yellow 2 587.0 589.5
4 589.5 592.0
5 592.0 593.0
Tolerance for each bin limit is ±0.5 nm.
Note:
All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent
representative for further clarification/information.
Mechanical Option Matrix
Mechanical Option Code Definition
00 Bulk Packaging, minimum increment 500 pcs/bag
01 Tape & Reel, crimped leads, min. increment 1300 pcs/bag for T-1 3/4, 1800
pcs/bag for T-1
02 Tape & Reel, straight leads, min. increment 1300 pcs/bag for T-1 3/4, 1800
pcs/bag for T-1
A1 T-1, Right Angle Housing, uneven leads, minimum increment 500 pcs/bag
A2 T-1, Right Angle Housing, even leads, minimum increment 500 pcs/bag
B1 Right Angle Housing, uneven leads, minimum increment 500 pcs/bag
B2 Right Angle Housing, even leads, minimum increment 500 pcs/bag
BH T-1, Tape & Reel, straight leads, minimum increment 2000 pcs/bag
R1 Tape & Reel, crimped leads, reeled counter clockwise, cathode lead leaving
the reel first
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(408) 654-8675
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 271 2451
India, Australia, New Zealand: (+65) 271 2394
Japan: (+81 3) 3335-8152(Domestic/International),
or 0120-61-1280(Domestic Only)
Korea: (+65) 271 2194
Malaysia, Singapore: (+65) 271 2054
Taiwan: (+65) 271 2654
Data subject to change.
Copyright © 2002 Agilent Technologies, Inc.
Obsoletes 5988-2227EN
January 17, 2002
5988-4940EN
