Back PCB Relay G6S Surface Mount DPDT Relay Long terminals for ideal for soldering and mounting reliability. Space-saving inside-L terminal. High dielectric strength between coil and contacts (2,000 VAC), and between contacts of different polarity (1,500 VAC). High impulse withstand voltages between coil and contacts, and between contacts of different polarity (2,500 V, 2 x 10 s: Bellcore requirements). Low power consumption (140 mW). Bifurcated crossbar contact (Au-clad) and plastic sealed construction for high reliability. Applicable to IRS. High sealability after IRS. Ultra-miniature at 15 x 7.5 x 9.4 mm (L x W x H). Through-hole terminal is available EN60950/EN41003 Supplementary Insulation-certified type is available. Ordering Information Classification DPDT Note: Plastic as c l d sealed Single-side stable Single-winding latching Double-winding latching Single-side stable EN60950/EN41003 Through-hole terminal G6S-2 G6SU-2 G6SK-2 G6S-2-Y Su ace mount Surface ou t terminal i l Inside-L G6S-2G G6SU-2G G6SK-2G G6S-2G-Y Outside-L G6S-2F G6SU-2F G6SK-2F G6S-2F-Y 1. When ordering, add the rated coil voltage to the model number. Example: G6S-2F 12 VDC Rated coil voltage 2. When ordering tape packing, add "-TR" to the model number. Example: G6S-2F-TR 12 VDC Tape packing Be sure since "-TR" is not part of the relay model number, it is not marked on the relay case. Model Number Legend: G6Sj-jj-j j VDC 1 2 3 4 5 1. Relay Function None: Single-side stable U: Single-winding latching K: Double-winding latching 2. Contact Form 2: DPDT 3. Terminal Shape None: Through-hole terminal G: Inside-L surface mount terminal F: Outside-L surface mount terminal 4. Approved Standards None: UL/CSA Y: EN60950/EN41003 5. Rated Coil Voltage (Refer to "Coil Ratings") 1 G6S G6S Specifications Coil Ratings Single-side Stable Type (G6S-2, G6S-2F, G6S-2G) Rated voltage 4.5 VDC 5 VDC 12 VDC 24 VDC Rated current 31.0 mA 28.1 mA 11.7 mA 8.3 mA Coil resistance 145 178 1,028 2,880 Must operate voltage 75% max. of rated voltage Must release voltage 10% min. of rated voltage Max. voltage 200% of rated voltage at 23C, 130% at 85C 170% of rated voltage at 23C, 130% at 85C Power consumption Approx. 140 mW Approx. 200 mW Note: 1. The rated current and coil resistance are measured at a coil temperature of 23C with a tolerance of 10%. 2. Operating characteristics are measured at a coil temperature of 23C. Single-winding Latching Type (G6SU-2, G6SU-2F, G6SU-2G) Rated voltage 4.5 VDC 5 VDC 12 VDC 24 VDC Rated current 22.2 mA 20 mA 8.3 mA 6.3 mA 203 250 1,440 3,840 Armature OFF 0.27 0.36 2.12 5.80 Armature ON 0.14 0.18 1.14 3.79 Coil resistance Co inductance Coil duc a ce (H) (ref. ( f value) l ) Must set voltage 75% max. of rated voltage Must reset voltage 75% max. of rated voltage Max. voltage 180% of rated voltage at 23C, 140% at 85C Power consumption Approx. 100 mW Note: Approx. 150 mW 1. The rated current and coil resistance are measured at a coil temperature of 23C with a tolerance of 10%. 2. Operating characteristics are measured at a coil temperature of 23C. Double-winding Latching Type (G6SK-2, G6SK-2F, G6SK-2G) Rated voltage 4.5 VDC 5 VDC 12 VDC 24 VDC Rated current 44.4 mA 40 mA 16.7 mA 12.5 mA Coil resistance 101 125 720 1,920 Armature OFF 0.12 0.14 0.60 1.98 Armature ON 0.074 0.088 0.41 1.23 Armature OFF 0.082 0.098 0.46 1.34 Armature ON 0.14 0.16 0.54 2.23 Co Coil i d t inductance (H) (ref. value) Set Reset Must set voltage 75% max. of rated voltage Must reset voltage 75% max. of rated voltage Max. voltage 170% of rated voltage at 23C, 130% at 85C 140% of rated voltage at 23C, 110% at 70C Power consumption Approx. 200 mW Approx. 300 mW Note: 1. The rated current and coil resistance are measured at a coil temperature of 23C with a tolerance of 10%. 2. Operating characteristics are measured at a coil temperature of 23C. Single-side Stable EN60950/EN41003 Approved Type (G6S-2-Y, G6S-2F-Y, G6S-2G-Y) Rated voltage 5 VDC 12 VDC 24 VDC Rated current 40 mA 16.7 mA 9.6 mA Coil resistance 125 720 2,504 Must operate voltage 75% max. of rated voltage Must release voltage 10% min. of rated voltage Max. voltage 170% of rated voltage at 23C, 130% at 85C 170% of rated voltage at 23C, 110% at 70C Power consumption Approx. 200 mW Approx. 230 mW Note: 1. The rated current and coil resistance are measured at a coil temperature of 23C with a tolerance of 10%. 2. Operating characteristics are measured at a coil temperature of 23C. 2 G6S G6S Contact Ratings Load Resistive load (cos = 1) Rated load 0.5 A at 125 VAC; 2 A at 30 VDC Contact material Ag (Au-clad) Rated carry current 2A Max. switching voltage 250 VAC, 220 VDC Max. switching current 2A Max. switching capacity 62.5 VA, 60 W Min. permissible load 10 A at 10 mVDC Note: P level: 60 = 0.1 x 10-6/operation Characteristics Contact resistance 75 m max. Operate (set)time 4 ms max. (mean value: approx. 2.5 ms; latching type: approx. 2 ms) Release (reset) time 4 ms max. (mean value: approx. 1.5 ms; latching type: approx. 2 ms) Bounce time Operate: Approx. 0.5 ms Release: Approx. 0.5 ms Set/Reset: Approx. 0.5 ms Max. operating frequency Mechanical: 36,000 operations/hr Electrical: 1,800 operations/hr (under rated load) Insulation resistance 1,000 M min. (at 500 VDC) Dielectric strength 2,000 VAC, 50/60 Hz for 1 min between coil and contacts 1,000 VAC, 50/60 Hz for 1 min between coil and contacts (double-winding latching) 1,500 VAC, 50/60 Hz for 1 min between contacts of different polarity 1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity 500 VAC, 50/60 Hz for 1 min between set and reset coil (double-winding latching) Impulse withstand voltage 2,500 V, 2 x 10 s between coil and contacts 1,500 V, 10 x 160 s between coil and contacts (double-winding latching) 2,500 V, 2 x 10 s between contacts of different polarity 1,500 V, 10 x 160 s between contacts of same polarity (conforms to FCC Part 68) Vibration resistance Destruction: 10 to 55 Hz, 5-mm double amplitude Malfunction: 10 to 55 Hz, 3.3-mm double amplitude Shock resistance Destruction: 1,000 m/s2 (approx. 100G) Malfunction: 750 m/s2 (approx. 75G) Life expectance Mechanical:100,000,000 operations min. (at 36,000 operations/hr) Electrical: 100,000 operations min. (2 A at 30 VDC, resistive load: 1,200 operations/hr) 100,000 operations min. (0.5 A at 125 VAC, resistive load) Ambient temperature Operating: -40C to 85C (with no icing), -40C to 70C (double-winding latching, 24 VDC) Storage: -40C to 85C (with no icing) Ambient humidity Operating: 35% to 85% Weight Approx. 2 g Approved Standards UL1950 (File No. E41515)/CSA C22.2 No.950 (File No. LR24825) Model G6S-2, G6S-2F, G6S-2G Contact form DPDT Coil ratings 1.5 to 48 VDC G6SU-2, G6SK-2, G6SU-2F, G6SU-2G, G6SK-2F, G6SK-2G 1.5 to 24 VDC Contact ratings 2 A,, 30 VDC C 0 3 A, 0.3 A 110 VDC 0.5 A, 125 VAC EN60950/EN41003 Model G6S-2-Y, G6S-2G-Y, G6S-2F-Y Contact form DPDT Isolation category Supplementary Isolation Voltage 250 VAC 3 G6S G6S Engineering Data Max. Switching Capacity Ambient Temperature vs. Maximum Voltage Single-side Stable Single-winding Latching Double-winding Latching AC resistive load DC resistive load Switching voltage (V) Maximum voltage (%) Maximum voltage (%) Switching current (A) 12 VDC max. 24 VDC (G6S-Y, 12 VDC max.) 24 VDC (G6S-Y) Ambient temperature (C) Reference Data Ambient Temperature vs. Switching Current Single-winding Latching Double-winding Latching 12 VDC max. 24 VDC (G6S-Y) 24 VDC (G6S-Y, 12 VDC max.) G6SU 12 VDC max. Switching current (A) Switching current (A) Single-side Stable G6SU 24 VDC G6SK 12 VDC max. G6SK 24 VDC Ambient temperature (C) Ambient temperature (C) Recommended Soldering Time vs. Surface PCB Temperature (The temperature profile indicates the temperature on the surface of the PCB.) IRS Temperature ( C) Soldering Preheating Time (s) 4 G6SU G6SK 12 VDC max. G6SK 24 VDC Ambient temperature (C) G6S G6S Dimensions Note: All units are in millimeters unless otherwise indicated. Single-side Stable G6S-2, G6S-2-Y Tolerance: 0.3 Footprint (Bottom View) Tolerance: 0.1 Eight, 1-dia. holes Terminal Arrangement/ Internal Connections (Bottom View) Orientation mark G6S-2F, G6S-2F-Y Tolerance: 0.3 Footprint (Top View) Tolerance: 0.1 Terminal Arrangement/ Internal Connections (Top View) Orientation mark G6S-2G, G6S-2G-Y Tolerance: 0.3 Footprint (Top View) Tolerance: 0.1 Terminal Arrangement/ Internal Connections (Top View) Orientation mark 5 G6S G6S Single-winding Latching G6SU-2 Footprint (Bottom View) Tolerance: 0.3 Tolerance: 0.1 Eight, 1-dia. holes G6SU-2F Footprint (Top View) Tolerance: 0.3 7.30.2 Tolerance: 0.1 Terminal Arrangement/ Internal Connections (Bottom View) Orientation mark Terminal Arrangement/ Internal Connections (Top View) Orientation mark G6SU-2G Tolerance: 0.3 7.30.2 Footprint (Top View) Tolerance: 0.1 Terminal Arrangement/ Internal Connections (Top View) Orientation mark 6 G6S G6S Double-winding Latching G6SK-2 Tolerance: 0.3 Footprint (Bottom View) Tolerance: 0.1 Ten, 1-dia. holes Terminal Arrangement/ Internal Connections (Bottom View) Orientation mark G6SK-2F Tolerance: 0.3 Footprint (Top View) Tolerance: 0.1 Terminal Arrangement/ Internal Connections (Top View) Orientation mark G6SK-2G Tolerance: 0.3 7.30.2 Footprint (Top View) Tolerance: 0.1 Terminal Arrangement/ Internal Connections (Top View) Orientation mark 7 G6S G6S Tape Packing When ordering, add "-TR" before the rated coil voltage for tape packing. Tape type: TE2416R (Refer to EIAJ) Reel type: R24E (Refer to EIAJ) Relays per reel: 400 29.51.0 25.50.5 20.3 210.5 G6S-2F, G6SU-2F, G6SK-2F, G6S-2F-Y 330 80 R1.0 130.2 G6S-2G, G6SU-2G, G6SK-2G, G6S-2G-Y Cover tape Carrier tape Emboss tape Orientation mark Feed direction Precautions Use a DC power supply with 5% or less ripple factor to operate the coil. Do not use the G6S where subject to strong external magnetic fields. Do not use the G6S where subject to magnetic particles or excessive amounts of dust. Do not reverse the polarity of the coil (+, -). Latching types are delivered in the reset position. We recommend that a reset voltage be applied in advance to start operation. Do not drop the G6S or otherwise subject it to excessive shock. Remove the relay from the packing immediately prior to usage. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. K93-E1-2C 8