12
Solder-In Style High Temp EMI Filters
YS/YR Series – .165 Dia. – Circuits Available – C & L
The YS series provides increased filtering
in the MICROWAVE frequency spectrum
from 1 MHz through 10 GHz. Previously
unavailable in the industry as a solder-in
device, this unique design offers higher
values of capacitance than were previ-
ously available. Designed to be soldered
into a package, bracket or bulkhead (and
maintain hermeticity), it is ideal for high
impedance circuits where large capaci-
tance values are not practical. In the “L”
section version an internal ferrite bead
element provides both inductance and
series resistance (lossy characteristic)
which improves insertion loss and pro-
vides superior transient performance.
Alternate lead lengths or special capaci-
tance values may be ordered.
Custom packages or bracket assemblies
utilizing this feedthru can be furnished to
your specifications.
• Meets or exceeds the applicable portions
of MIL-F-28861/15. See QPL listings.
• High temperature construction with-
stands 300°C installation temperatures.
• Features rugged monolithic discoidal
capacitor construction.
• Glass hermetic seal on one end with
epoxy seal on the opposite end.
• High purity gold plating provides excel-
lent solderability or compatibility with
thermal and ultrasonic wire bonding.
1. Plating: Gold standard – Silver available
2. Material:
Case: Cold rolled steel
Leads: Alloy 52 steel
3. Operating Temperature Range:
-55°C to +125°C
4. Insulation Resistance:
At 25°C: 1,000 megohm-microfarad
min., or 100,000 megohms
min., whichever is less
At 125°C: 100 megohm-microfarad
min., or 10,000 megohms
min., whichever is less
5. Dielectric Withstanding Voltage (DWV):
R-level designs:
2.0 times rated DC voltage
Class B, Class S designs:
2.5 times rated DC voltage
6. DC Resistance (DCR): .01 ohm,
maximum
7. Dissipation Factor (DF): 3% maximum
8. Rated DC Current: 5 Amps, maximum
9. Maximum Installation Temperature:
300°C
10. Supplied with 60/40 solder preform for
easy installation
11. Insertion Loss for the “C” and “L” circuits
are equivalent due to the saturation
characteristic of the ferrite bead element
at full rated current. At lower currents the
“L” becomes much more effective.
SPECIFICATIONS
.165
±.005
.025
±.005
A
.25
±.03
(2 PLC)
B
GLASS SEAL
.200
±.005
.032
±.002
0.05 (.002) 4.19 (.165)
0.13 (.005) 5.08 (.200)
0.64 (.025) 6.35 (.250)
0.8 (.03) 16.51 (.650)
0.81 (.032) 19.05 (.750)
3.81 (.150) — —
Notes:
1. Outline drawing shows stan-
dard YS configuration. Also
available with glass seal at
the opposite end, YR reverse
configuration.
2. MIL-F-28861/15 style A
equivalent to standard YS
configuration. Style B is
reverse YR configuration.
3. For YS2 or YR2 L-Section
Filters inductor always posi-
tioned at epoxy-filled end.
4. Metric equivalent dimensions
given for information only.
millimeters (inches)
C
YS1, YR1
CIRCUIT DIAGRAMS
STANDARD CONFIGURATION
YS2 (See Note 3)
GLASS
SEAL
END
FLANGE
END
YR2
GLASS
SEAL
END
FLANGE
END
CHARACTERISTICS
APPLICATIONS
Dimensions
Circuit A B
Diagram ±.005 Ref.
L.250 .750
C.150 .650
Dash No. Config.
001 through 004 A
005 through 008 B
MIL-F-28861/15 (See Note 2)
(See Note 4)
13
Solder-In Style High Temp EMI Filters
YS/YR Series – .165 Dia. – Circuits Available – C & L
Insertion Loss2Per MIL-STD-220, +25°C
AVX Current DC CAP1500 1 10 100 1000 10
P/N AMP CKT Voltage Min. KHz MHz MHz MHz MHz GHz
YS1C2-152H 5 C 50 1500 – – 5 21 42 55
YS1C2-502H 5 C 50 5000 – – 15 34 50 60
YS1C2-103H 5 C 50 .010 – 4 20 35 53 60
YS1C2-153H 5 C 50 .015 – 7 25 40 55 60
YS1C2-203H 5 C 50 .020 – 8 27 41 60 65
YS1C2-273H 5 C 50 .027 4 10 30 42 65 70
YS1C2-503H 5 C 50 .050 9 15 35 44 70 70
YS1C2-753H 5 C 50 .075 12 18 37 46 70 70
YS1C2-104H 5 C 50 .1 14 20 38 48 70 70
YS2C2-152H 5 L 50 1500 – – 6 22 48 55
YS2C2-502H 5 L 50 5000 – – 15 35 55 60
YS2C2-103H 5 L 50 .010 – 4 20 36 57 60
YS2C2-153H 5 L 50 .015 – 7 25 45 60 60
YS2C2-203H 5 L 50 .020 – 8 27 46 62 65
YS2C2-273H 5 L 50 .027 4 10 30 48 65 70
YS2C2-503H 5 L 50 .050 9 15 36 50 70 70
YS2C2-753H 5 L 50 .075 12 18 37 51 70 70
YS2C2-104H 5 L 50 .1 14 20 39 52 70 70
YS1A2-152H 5 C 100 1500 – – 5 21 42 55
YS1A2-502H 5 C 100 5000 – – 15 34 50 60
YS1A2-103H 5 C 100 .010 – 4 20 35 53 60
YS1A2-153H 5 C 100 .015 – 7 25 40 55 60
YS1A2-203H 5 C 100 .020 – 8 27 41 60 65
YS1A2-273H 5 C 100 .027 – 10 30 42 65 70
YS1A2-503H 5 C 100 .050 9 15 35 44 70 70
YS1A2-753H 5 C 100 .075 12 18 37 46 70 70
YS2A2-152H 5 L 100 1500 – – 6 22 48 55
YS2A2-502H 5 L 100 5000 – – 15 35 55 60
YS2A2-103H 5 L 100 .010 – 4 20 36 57 60
YS2A2-153H 5 L 100 .015 – 7 25 45 60 60
YS2A2-203H 5 L 100 .020 – 8 27 46 62 65
YS2A2-273H 5 L 100 .027 – 10 30 48 65 70
YS2A2-503H 5 L 100 .050 9 15 36 50 70 70
YS2A2-753H 5 L 100 .075 12 18 37 51 70 70
continued
1Decimal point values indicate capacitance in microfarads.
Non-decimal point values indicate capacitance in picofarads.
2Insertion loss limits are based on theoretical values.
Actual measurements may vary due to internal capacitor
resonances and other design constraints.
NOTE: AVX Filters' Standard configurations (e.g. ZS, YS, XS, WS) have the hermetic glass seal
opposite the flange end. All parts are capable of the reverse configuration with the glass
seal at the flange end. All parameters are otherwise identical. The part number changes
from “S” to “R” (e.g., standard = ZS1C2-153H; reverse = ZR1C2-153H).
For special multi-unit assemblies see Multi-Component Filter Brackets section.
SPECIFICATIONS
14
Solder-In Style High Temp EMI Filters
YS/YR Series – .165 Dia. – Circuits Available – C & L
Insertion Loss2Per MIL-STD-220, +25°C
AVX Current DC CAP1500 1 10 100 1000 10
P/N AMP CKT Voltage Min. KHz MHz MHz MHz MHz GHz
YS1B2-152H 5 C 200 1500 – – 5 21 42 55
YS1B2-502H 5 C 200 5000 – – 15 34 50 60
YS1B2-103H 5 C 200 .010 – 4 20 35 53 60
YS1B2-153H 5 C 200 .015 – 7 25 40 55 60
YS1B2-203H 5 C 200 .020 – 8 27 41 60 65
YS1B2-273H 5 C 200 .027 4 10 30 42 65 70
YS2B2-152H 5 L 200 1500 – – 6 22 48 55
YS2B2-502H 5 L 200 5000 – – 15 35 55 60
YS2B2-103H 5 L 200 .010 – 4 20 36 57 60
YS2B2-153H 5 L 200 .015 – 7 25 45 60 60
YS2B2-203H 5 L 200 .020 – 8 27 46 62 65
YS2B2-273H 5 L 200 .027 4 10 30 48 65 70
1Decimal point values indicate capacitance in microfarads.
Non-decimal point values indicate capacitance in picofarads.
2Insertion loss limits are based on theoretical values.
Actual measurements may vary due to internal capacitor
resonances and other design constraints.
NOTE: AVX Filters' Standard configurations (e.g. ZS, YS, XS, WS) have the hermetic glass seal
opposite the flange end. All parts are capable of the reverse configuration with the glass
seal at the flange end. All parameters are otherwise identical. The part number changes
from “S” to “R” (e.g., standard = ZS1C2-153H; reverse = ZR1C2-153H).
For special multi-unit assemblies see Multi-Component Filter Brackets section.
SPECIFICATIONS
