www.carlingtech.com 23
M-Series Rocker UL Recognized – Ordering Scheme
020 0.020
025 0.025
030 0.030
035 0.035
040 0.040
045 0.045
050 0.050
055 0.055
060 0.060
065 0.065
070 0.070
075 0.075
080 0.080
085 0.085
090 0.090
095 0.095
210 0.100
215 0.150
220 0.200
225 0.250
230 0.300
235 0.350
240 0.400
245 0.450
250 0.500
255 0.550
260 0.600
265 0.650
270 0.700
275 0.750
280 0.800
285 0.850
290 0.900
295 0.950
410 1.000
512 1.250
415 1.500
517 1.750
420 2.000
522 2.250
425 2.500
527 2.750
430 3.000
435 3.500
440 4.000
445 4.500
450 5.000
455 5.500
460 6.000
465 6.500
470 7.000
475 7.500
480 8.000
485 8.500
490 9.000
495 9.500
610 10.000
710 10.500
611 11.000
711 11.500
612 12.000
712 12.500
613 13.000
614 14.000
615 15.000
616 16.000
617 17.000
717 17.500
618 18.000
619 19.000
620 20.000
622 22.000
624 24.000
625 25.000
63012 30.000
6 CURRENT RATING (AMPERES)10
10
Legend
8
Illumination
10 LEGEND11
1No Legend
2ON - OFF Vertical
3ON - OFF Horizontal
4I - O Vertical
5I - O Horizontal
6Dual Vertical
7Dual Horizontal
3 POLES
1One 2Two
1 SERIES
M
6
Current Rating
4
Circuit
3
Poles
2
Actuator 9
Actuator
Color
M
7
Terminal
5
Frequency
& Delay
1
Series
G 2 B 34 620 1 H C 6
12
Agency
Approval
11
Bezel
Color
7 C
8 ROCKER ILLUMINATION
Non-illuminated
A
Neon
5
Neon Green Glow8
without resistor, 120VAC/250VAC BC
LED
7, 8
Red Green Amber
without resistor DG K
with resistor, 4-8 VDC EH L
with resistor, 9-16 VDC FJ M
9 ACTUATOR & LEGEND COLOR
Solid Color
Actuator Legend
1White Black
2Black White
3Red White
4Green White
5Blue White
6Yellow Black
7Gray Black
8Orange Black
Visi-Rocker
6
Visi & Legend (remainder of rocker same color as bezel)
1White
2Black
3Red
4Green
5Blue
6Yellow
7Gray
8Orange
Illuminated
8
Actuator Legend
AClear White
BRed Transparent White
CGreen Transparent White
DAmber Transparent White
ESmoke Gray Transparent White
FWhite Translucent Black
11 BEZEL COLOR / STYLE9
Color without Rockerguard with Rockerguard
White A1
Black B2
Gray G7
12 AGENCY APPROVAL10
CUL Recognized & CSA Accepted
DVDE Certified, UL Recognized & CSA Accepted
ETUV Certified, UL Recognized & CSA Accepted
5 FREQUENCY & DELAY
03 DC 50/60Hz, Switch Only
10 DC Instantaneous
12 DC Short
14 DC Medium
20 50/60Hz Instantaneous
22 50/60Hz Short
24 50/60Hz Medium
30 DC, 50/60Hz Instantaneous
32 DC, 50/60Hz Short
34 DC, 50/60Hz Medium
62 50/60Hz Short, Hi-Inrush
64 50/60Hz Medium, Hi-Inrush
72 DC, Short, Hi-Inrush
74 DC,Medium, Hi-Inrush
92 DC, 50/60Hz Short, Hi-Inrush
94 DC, 50/60Hz, Medium, Hi-Inrush
7 TERMINAL10
1Push-On 0.250 Tab (Q.C.)
2 13 Screw 8-32 w/upturned lugs
3 13 Screw 8-32 (Bus Type)
A14 Push-In Stud
P15 Printed Circuit Board
Notes:
1 One actuator is located in the center of each multi-pole breaker.
2 For Switch Only circuits, select Current Coil Rating from the following chart:
3 One Auxiliary Switch is supplied per breaker. On two-pole breakers, standard Auxiliary Switch
mounting is in pole one. Auxiliary Switch option limited to Series Trip & Switch Only circuits, & is not
available in single pole illuminated breakers, or Back Connected Screw or Push-in Stud terminals.
4 Mates with AMP .058" diameter pin receptacles: 60983-1 (gold plated) & 60983-2 (tin plated).
5 For neon bulb applications at 120VAC @ 47K, 1/4 WATT and for 250VAC applications @ 150K,
1/4 WATT, external resistors must be supplied by customer.
6 On Visi-Rocker breakers, Visi portion of rocker cannot be the same color as the bezel.
7 For LED (DC or rectified AC) applications, LED is mounted in the center of the rocker actuator with
electrical characteristics: 100 millicandela at 20mA; Maximum power dissipation = 75mW at 25°C;
Maximum forward current = 25mA; Typical forward voltage = 2.1V at 20mA; Typical reverse current
= 100uA at 3V. Customer supplies the proper external resistor limiting current to these values.
8 Rocker color for LED’s and green neon lamp must be clear, smoke gray, white translucent or
match color of LED or neon lamp.
9 Other colors available. Consult factory.
10 TUV and VDE Certified to 25 amps. UL Recognized and CSA Accepted to 30 amps. Screw
Terminals or Push-in Stud recommended above 20 amps.
11 TUV or VDE Certified must have I-O or Dual Legends. Legend required on Visi-Rocker breakers.
12 30 amp rating not available with delay’s 30, 32, 34, 92 or 94.
13 Screw Terminals are VDE certified only with use of ring terminal attached to wire.
14 Terminal code A available with circuit codes A & B only.
15 Printed circuit board available with UL recognized approval only.
16 Auxiliary switch (flat Q.C.) available with UL recognized approvals only.
2 ACTUATOR 1
Non-Illuminated
single color
AAngled
BFlat
Two Color
Visi-Rocker
DIndicate ON
EIndicate OFF
llluminated
single color
FAngled
GFlat
4 CIRCUIT 2
without Auxiliary Switch
ASwitch Only (No Coil), Maintained Contacts
BSeries Trip (Current)
with Auxiliary Switch, Silver Contacts Terminal Type:
P3 Switch Only, Maintained Contacts .060 Dia, Round Solder Turret
Q3, 4 Switch Only, Maintained Contacts .058 Dia, Round Q.C.
R3, 16 Switch Only, Maintained Contacts .080 Dia x .020 Flat Q.C.
S3Series Trip (Current) .060 Dia, Round Solder Turret
T3, 4 Series Trip (Current) .058 Dia, Round Q.C.
U3, 16 Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C.
with Auxiliary Switch, Gold Contacts
23, 4 Switch Only, Maintained Contacts .058 Dia, Round Q.C.
33, 16 Switch Only, Maintained Contacts .080 Dia x .020 Flat Q.C.
43,4 Series Trip (Current) .058 Dia, Round Q.C.
53, 16 Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C.
––––––