3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Connectors
.050” Metal Junction Shell for Flat Cable 103 Series
• Metal junction shell for flat cable
• Rugged two piece metal junction shells for high
performance pleated foil cable assemblies
(compatible with 101XX-6000EC plug)
• Kit includes conductive gasket for superior cable
shield to shell continuity
• Accepts 3M 50 Ohm PFC cables
• Positions 26, 36 and 40
• RoHS* compliant. See the Regulatory Information
Appendix (RIA) in the “RoHS compliance” section
of www.3Mconnector.com for compliance
information (RIA E1 & C1 apply)
Date Modied: March 10, 2010 TS-0655-B
Sheet 1 of 2
Physical
Shell
Material: Zinc, .020” [ 0.5 mm ] Thick
Plating: Nickel
Gasket Material: Conductive, Silicone Elastomer
Marketing: 3M Logo and Part Identification Number
*RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
“RoHS compliant” means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any
homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium,
polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information
represents 3M’s knowledge and belief based upon information provided by third party suppliers to 3M.
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Connectors
.050” Metal Junction Shell for Flat Cable 103 Series
TS-0655-B
Sheet 2 of 2
‘
Top Shell
A
1.423
[36.15]
.15
[3.8]
B
.18
[4.5]
.12
[3.0]
E.191
[4.86]
C
.16 ± .03
[4.1]
.40 ± .02
[10.2]
D
.050
[1.27]
.25
[6.4]
Bottom Shell
Elastomer Gasket
Assembled Junction Shell
Shim
Ordering Information
103XX - 1230 - 00
Inch
[mm]
Tolerance Unless Noted
.0 .00 .000
Inch ±.1 ±.01 ±.005
[ ] Dimensions for
Reference only
Notes:
1. Accepts 3M Part Number 101XX-6000 Connector and 90201/XX Pleated Foil Cable.
2. Use Pozidriv® screwdriver point size 1. Pozidriv® is a registered trademark of Phillips Screw Company.
Contact Quantity (See Table)
Contact
Quantity
Dimensions
A B C D E
26 1.309 [33.26] 1.159 [29.44] 0.994 [25.25] 0.714 [18.14] 0.820 [20.80]
36 1.559 [39.61] 1.409 [35.79] 1.244 [31.60] 0.964 [24.49] 1.07 [27.10]
40 1.659 [42.15] 1.509 [38.33] 1.344 [34.14] 1.064 [27.03] 1.17 [29.70]
Package Contents:
4 ea - M2.5 Pozidriv® flat head self-tapping screws
2 ea - Metal shell halves
2 ea - Metal latches
2 ea - Elastomer gasket
1 ea - Shim (Aluminum)
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
Please recycle. Printed in USA.
© 3M 2010. All rights reserved.
RIA-2217B-E
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnector.com 3M is a trademark of 3M Company.
