Low IQ, Low Dropout 300mA Fixed Voltage Regulator
Copyright ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
APL5308/9
www.anpec.com.tw1
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise
customers to obtain the latest version of relevant information to verify before placing orders.
SOT-23-3 (Top View)
APL5309
GND
1 2
3
VOUT VIN
APL5309
SOT-89 (Top View)
GND VINVOUT
1 2 3
TAB is GND
Features
The APL5308/9 series are micropower, low dropout lin-
ear regulators, which operate from 2.7V to 6V input volt-
age and deliver up to 300mA. Typical dropout voltage
is only 400mV at 300mA loading. Designed for use in
battery-powered system, the low 60µA quiescent cur-
rent makes it an ideal choice. Design with an internal P-
channel MOSFET pass transistor, the APL5308/9 maintain
a low supply current, independent of the load current and
dropout voltage. Other features include thermal-shut-
down protection current limit protection to ensure
specified output current and controlled short-circuit
current. The APL5308/9 regulators come in a minia-
ture SOT-23-3, SOT-23-5, and SOT-89 packages.
Applications
Low Quiescent Current : 60µA (No load)
Low Dropout Voltage : 400mV (@300mA)
Fixed Output Voltage : 1.5V ~ 4.5V by Step 0.1V
Increment
Stable with Aluminum, Tantalum, or Ceramic
Capacitors
No Protection Diodes Needed
Built-in Thermal Protection
Built-in Current-Limit Protection
Controlled Short Circuit Current : 50mA
Fast Transient Response
Short Setting Time
SOT-23-3, SOT-23-5, and SOT-89 Packages
Lead Free and Green Devices Available
(RoHS Compliant) Pin Configuration
SOT-23-3 (Top View)
GND
1 2
3
VOUT
VIN
APL5308
General Description
VIN GND
VOUT NC
NC
1 2 3
45
SOT-23-5 (Top View)
APL5309
APL5308
SOT-89 (Top View)
GND VIN VOUT
1 2 3
TAB is VIN
VINGND VOUT
NCNC
1 2 3
45
SOT-23-5 (Top View)
APL5308
5V to 3.3~4.5V Linear Regulators
3.3V to 1.5~2.5V Linear Regulators
CD-ROM, CD-R/W, and DVD Player
Networking System, LAN Card, ADSL/Cable
Modem, Cable Set-Top Box
PC Peripherals
Copyright ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
APL5308/9
www.anpec.com.tw2
Ordering and Marking Information
Product Name Marking Product Name Marking
APL5308-15A/B 389X APL5309-15A/B 399X
APL5308-16A/B 38AX APL5309-16A/B 39AX
APL5308-17A/B 38BX APL5309-17A/B 39BX
APL5308-18A/B 38CX APL5309-18A/B 39CX
APL5308-19A/B 38DX APL5309-19A/B 39DX
APL5308-20A/B 38EX APL5309-20A/B 39EX
APL5308-21A/B 38FX APL5309-21A/B 39FX
APL5308-22A/B 38GX APL5309-22A/B 39GX
APL5308-23A/B 38HX APL5309-23A/B 39HX
APL5308-24A/B 38IX APL5309-24A/B 39IX
APL5308-25A/B 38JX APL5309-25A/B 39JX
APL5308-26A/B 38KX APL5309-26A/B 39KX
APL5308-27A/B 38LX APL5309-27A/B 39LX
APL5308-28A/B 38MX APL5309-28A/B 39MX
APL5308-29A/B 38NX APL5309-29A/B 39NX
APL5308-30A/B 38OX APL5309-30A/B 39OX
APL5308-31A/B 38PX APL5309-31A/B 39PX
APL5308-32A/B 38QX APL5309-32A/B 39QX
APL5308-33A/B 38RX APL5309-33A/B 39RX
APL5308-34A/B 38SX APL5309-34A/B 39SX
APL5308-35A/B 38TX APL5309-35A/B 39TX
APL5308-43A/B 38UX APL5309-43A/B 39UX
APL5308-45A/B 38VX APL5309-45A/B 39VX
Marking Information
SOT-23-3 and SOT-23-5 packages
The last character X in the marking is for data code.
Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which
are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020C for
MSL classification at lead-free peak reflow temperature. ANPEC defines Greento mean lead-free (RoHS compliant) and halogen
free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by
weight).
Package Code
A : SOT-23-3 B : SOT-23-5 D : SOT-89
Operating Ambient Temperature Range
I : -40 to 85 oCC : 0 to 70 oC
Handling Code
TR : Tape & Reel
Voltage Code :
15 : 1.5V ~ 45 : 4.5V
Assembly Material
G : Halogen and Lead Free Device
APL5308/9
Handling Code
Temperature Range
Package Code
Voltage Code
APL5308/9
XXXXX 15 XXXXX - Date Code ; 15 - 1.5V
APL5308/9 15 D :
Assembly Material
Copyright ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
APL5308/9
www.anpec.com.tw3
Electrical Characteristics
APL5308/9
Symbol
Parameter Test Conditions Min. Typ. Max.
Unit
VIN Input Voltage 2.7 - 6 V
VOUT Output Voltage VOUT+1.0V< VCC<6.0V, 0mA< IOUT < IMAX VOUT -2%
VOUT VOUT +2%
V
ILIMIT Circuit Current Limit VIN = VOUT+1V - 650 - mA
ISHORT Short Current VOUT = 0V - 50 - mA
IOUT Load Current VIN = VOUT+1V 300 - - mA
REGLINE
Line Regulation VOUT+1V< VCC<6.0V, IOUT = 1mA - 1 10 mV
REGLOAD
Load Regulation VIN = VOUT+1V, 0mA< IOUT < IMAX - 10 25 mV
Load Transient VIN= VOUT+1V, IOUT = 1mA-300mA in 1µs
- 150 250 mV
1.5VVOUT<2.0V
- 1 1.2
2.0VVOUT<2.5V
- 0.8 0.9
2.5VVOUT<3V - 0.6 0.7
VDROP Dropout Voltage(Note3) IOUT =300mA
3VVOUT 3.5V - 0.4 0.5
V
PSRR Ripple Rejection F1kHz, 1Vpp at VIN = VOUT+1.0V 45 55 - dB
No load - 60 100
IQ Quiescent Current IOUT = 300mA - 450 500 µA
Absolute Maximum Ratings (Note 1, 2)
Symbol Parameter Rating Unit
VIN, VOUT Input Voltage or Out Voltage 6.5 V
RTH,JA
Thermal Resistance Junction to Ambient SOT-23-3
SOT-23-5
SOT-89
260
260
180
°C/W
RTH,JC
Thermal Resistance Junction to Case SOT-23-3
SOT-23-5
SOT-89
130
130
60
°C/W
PD Power Dissipation Internally Limited W
TJMAX Junction Temperature 150 °C
TSTG Storage Temperature Range -65 to +150 °C
TL Lead Temperature, 10 Seconds 260 °C
Note 1: Stresses beyond the absolute maximum rating may damage the device and operating in the absolute maximum rating
conditions may affect device reliability.
Note 2: The maximum allowable power dissipation at any TA (ambient temperature) is calculated using: PD (max) = (TJ - TA) / θJA;
TJ = 125oC. Exceeding the maximum allowable power dissipation will result in excessive die temperature.
Unless otherwise noted these specifications apply over full temperature, CIN = 1µF, COUT = 4.7µF, TA= -40 to 85°C. Typical values refer
to TA = 25°C.
Copyright ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
APL5308/9
www.anpec.com.tw4
Electrical Characteristics (Cont.)
APL5308/9
Symbol
Parameter Test Conditions Min.
Typ. Max.
Unit
OTS Over Temperature Shutdown - 150 - °C
Over Temperature Shutdown Hysteresis
Hysteresis - 30 - °C
TC Output Voltage Temperature Coefficient
- 50 - ppm/°C
TJ Junction Temperature 0 - 125 °C
COUT Output Capacitor - 2.2 - µF
ESR 0.01 0.1 1 Ohm
Note 3 : Dropout voltage definition : VIN-VOUT when VOUT is 2% below the value of VOUT for VIN = VOUT+1V.
Unless otherwise noted these specifications apply over full temperature, CIN = 1µF, COUT = 4.7µF, TA= -40 to 85°C. Typical values refer
to TA = 25°C.
Copyright ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
APL5308/9
www.anpec.com.tw5
APL5308/9-33
APL5308/9-33
0
50
100
150
200
250
300
350
400
450
0123456
0
0.5
1
1.5
2
2.5
3
3.5
0 1 2 3 4 5
0
50
100
150
200
250
300
350
400
450
0 100 200 300 400 500
Typical Operating Characteristics
Quiescent Current vs. Input Voltage
Input Voltage (V)
Quiescent Current (µA)
Quiescent Current vs. Output Current
Quiescent Current (µA)
Output Current (mA)
Output Voltage vs. Input Voltage
Input Voltage (V)
Output Voltage (V)
3.28
3.28
3.29
3.29
3.30
3.30
3.31
3.31
-40 -20 020 40 60 80 100 120 140
Output Voltage vs. Temperature
Temperature (°C )
Output Voltage (V)
IOUT=0mA
VIN=5V
IOUT=0mA
VOUT=3.3V
VOUT=2.5V
VOUT=1.8V
APL5308/9-33
Copyright ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
APL5308/9
www.anpec.com.tw6
1.77
1.78
1.79
1.80
1.81
1.82
1.83
1.84
-40 -20 020 40 60 80 100 120 140
0
100
200
300
400
500
600
700
050 100 150 200 250 300
PSRR vs. Frequency
Frequency (HZ)
PSRR (dB)
Output Current (mA)
Dropout Voltage (mV)
Dropout Voltage vs. Output Current
Temperature (°C)Temperature (°C)
Output Voltage (V)
Output Voltage (V)
Output Voltage vs. TemperatureOutput Voltage vs. Temperature
APL5308/9-2.5 APL5308/9-1.8
VOUT=1.9V
VOUT=2.5V
VOUT=3.3V
VOUT=2.8V
APL5308/9-33
2.45
2.46
2.47
2.48
2.49
2.50
2.51
2.52
2.53
2.54
2.55
-40 -20 0 20 40 60 80 100 120 140
Typical Operating Characteristics (Cont.)
-80
+0
-70
-60
-50
-40
-30
-20
-10
20 200k
50 100 200 500 1k2k5k10k 20k 50k 100k
VIN =5V
IOUT =50mA
Copyright ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
APL5308/9
www.anpec.com.tw7
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
025 50 75 100 125
Recommended Minimum Footprint
Load-Transient Response
Output Voltage (100mV/div)
Time (100µs/div)Time (200µs/div)
Line-Transient Response
Output Voltage (10mV/div)
Power Dissipation (W)
Ambient Temperature (°C)
Power Dissipation vs. Ambient Temperature
SOT-89
SOT-25
APL5308/9-33
APL5308/9-33
VOUT
VIN=5V
COUT=1µF
IOUT=1mA~300mA
VIN=4.5V~5.5V
COUT=1µF
IOUT=10mA
VOUT
Typical Operating Characteristics (Cont.)
Copyright ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
APL5308/9
www.anpec.com.tw8
Pin Description
PIN
NO. NAME I/O FUNCTION
1 VIN I Supply voltage input.
2 GND Ground pins of the circuitry, and all ground pins must be soldered
To PCB with proper power dissipation.
3 VOUT O Output pin of the regulator.
Typical Application Circuit
VOUTVIN
GND
VOUT
CIN
1µF
APL5308/9
INPUT
2.7V to 6V
COUT
2.2µF
Copyright ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
APL5308/9
www.anpec.com.tw9
Package Information
SOT-23-3
0
L
VIEW A
0.25
GAUGE PLANE
SEATING PLANE
A
A2
A1
e
D
E
E1
SEE
VIEW A
bc
e1
MAX.
0.057
0.051
0.024
0.006
0.009
0.0200.012
L0.30
0
e
e1
E1
E
D
c
b
0.08
0.30
0.60 0.012
0.95 BSC
1.90 BSC
0.22
0.50
0.037 BSC
0.075 BSC
0.003
MIN.
MILLIMETERS
S
Y
M
B
O
L
A1
A2
A
0.00
0.90
SOT-23-3
MAX.
1.45
0.15
1.30
MIN.
0.000
0.035
INCHES
°
8
°
0
°
8
°
0
1.40
2.60
1.80
3.00
2.70 3.10 0.122
0.071
0.1180.102
0.055
0.106
Note : Dimension D and E1 do not include mold flash, protrusions or gate
burrs. Mold flash, protrusion or gate burrs shall not exceed 10 mil
per side.
Copyright ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
APL5308/9
www.anpec.com.tw10
Package Information
SOT-23-5
MAX.
0.057
0.051
0.024
0.006
0.009
0.0200.012
L0.30
0
e
e1
E1
E
D
c
b
0.08
0.30
0.60 0.012
0.95 BSC
1.90 BSC
0.22
0.50
0.037 BSC
0.075 BSC
0.003
MIN.
MILLIMETERS
S
Y
M
B
O
L
A1
A2
A
0.00
0.90
SOT-23-5
MAX.
1.45
0.15
1.30
MIN.
0.000
0.035
INCHES
°
8
°
0
°
8
°
0
bc
e1
0
L
VIEW A
0.25
GAUGE PLANE
SEATING PLANE
A
A2A1
e
D
E
E1
SEE
VIEW A
1.40
2.60
1.80
3.00
2.70 3.10 0.122
0.071
0.1180.102
0.055
0.106
Note : 1. Follow JEDEC TO-178 AA.
2. Dimension D and E1 do not include mold flash, protrusions or gate
burrs. Mold flash, protrusion or gate burrs shall not exceed 10 mil
per side.
Copyright ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
APL5308/9
www.anpec.com.tw11
Package Information
SOT-89
S
Y
M
B
OMIN. MAX.
MILLIMETERS
SOT-89
MIN. MAX.
INCHES
A
C
e1
e
B
B1
D
D1
H
EL
E1
1.60
0.44
0.35 0.44
4.40 4.60
1.62 1.83
0.56
2.13
A
B
C
D
D1
E
E1
e
e1
B1 0.36 0.48
3.00 BSC
3.94 4.25
2.29 2.60
2.29
0.118 BSC
0.063
0.017
0.014 0.019
0.014 0.017
0.173 0.181
0.064 0.072
0.084
0.155 0.167
0.090 0.102
0.090
0.022
L0.89 0.035
H
1.50 BSC 0.059 BSC
1.40
1.20 0.047
0.055
L
Note : Follow JEDEC TO-243 AA.
Copyright ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
APL5308/9
www.anpec.com.tw12
Application
A H T1 C d D W E1 F
178.0±2.00
50 MIN.
8.4+2.00
-0.00
13.0+0.50
-0.20
1.5 MIN.
20.2 MIN.
8.0±0.30
1.75±0.10
3.5±0.05
P0 P1 P2 D0 D1 T A0 B0 K0
SOT-23-3
4.0±0.10
4.0±0.10
2.0±0.05
1.5+0.10
-0.00
1.0 MIN.
0.6+0.00
-0.40
3.20±0.20
3.10±0.20
1.50±0.20
Application
A H T1 C d D W E1 F
178.0±2.00
50 MIN.
8.4+2.00
-0.00
13.0+0.50
-0.20
1.5 MIN.
20.2 MIN.
8.0±0.30
1.75±0.10
3.5±0.05
P0 P1 P2 D0 D1 T A0 B0 K0
SOT-23-5
4.0±0.10
4.0±0.10
2.0±0.05
1.5+0.10
-0.00
1.0 MIN.
0.6+0.00
-0.40
3.20±0.20
3.10±0.20
1.50±0.20
Application
A H T1 C d D W E1 F
178.0±2.00
50 MIN.
12.4+2.00
-0.00
13.0+0.50
-0.20
1.5 MIN.
20.2 MIN.
12.0±0.30
1.75±0.10
5.50±0.05
P0 P1 P2 D0 D1 T A0 B0 K0
SOT-89
4.0±0.10
8.0±0.10
2.0±0.05
1.5+0.10
-0.00
1.5 MIN.
0.6+0.00
-0.40
4.80±0.20
4.50±0.20
1.80±0.20
Carrier Tape & Reel Dimensions
A
E1
A
B
W
F
T
P0
OD0
BA0
P2
K0
B0
SECTION B-B
SECTION A-A
OD1
P1
H
T1
A
d
Copyright ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
APL5308/9
www.anpec.com.tw13
Package Type Unit Quantity
SOT 23-3 Tape & Reel 3000
SOT 23-5 Tape & Reel 3000
SOT-89 Tape & Reel 1000
Devices Per Unit
Taping Direction Information
SOT-89
SOT-23-3
SOT-23-5
USER DIRECTION OF FEED
USER DIRECTION OF FEED
USER DIRECTION OF FEED
Copyright ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
APL5308/9
www.anpec.com.tw14
Reflow Condition (IR/Convection or VPR Reflow)
t 25 C to Peak
tp
Ramp-up
tL
Ramp-down
ts
Preheat
Tsmax
Tsmin
TL
TP
25
Temperature
Time
Critical Zone
TL to TP
°
Test item Method Description
SOLDERABILITY MIL-STD-883D-2003 245°C, 5 sec
HOLT MIL-STD-883D-1005.7 1000 Hrs Bias @125°C
PCT JESD-22-B,A102 168 Hrs, 100%RH, 121°C
TST MIL-STD-883D-1011.9 -65°C~150°C, 200 Cycles
ESD MIL-STD-883D-3015.7 VHBM > 2KV, VMM > 200V
Latch-Up JESD 78 10ms, 1tr > 100mA
Reliability Test Program
Profile Feature Sn-Pb Eutectic Assembly Pb-Free Assembly
Average ramp-up rate
(TL to TP) 3°C/second max. 3°C/second max.
Preheat
- Temperature Min (Tsmin)
- Temperature Max (Tsmax)
- Time (min to max) (ts)
100°C
150°C
60-120 seconds
150°C
200°C
60-180 seconds
Time maintained above:
- Temperature (TL)
- Time (tL)
183°C
60-150 seconds 217°C
60-150 seconds
Peak/Classification Temperature (Tp)
See table 1 See table 2
Time within 5°C of actual
Peak Temperature (tp) 10-30 seconds 20-40 seconds
Ramp-down Rate 6°C/second max. 6°C/second max.
Time 25°C to Peak Temperature 6 minutes max. 8 minutes max.
Notes: All temperatures refer to topside of the package. Measured on the body surface.
Classification Reflow Profiles
Copyright ANPEC Electronics Corp.
Rev. A.10 - Dec., 2008
APL5308/9
www.anpec.com.tw15
Table 1. SnPb Eutectic Process Package Peak Reflow Temperatures
Package Thickness Volume mm3
<350 Volume mm3
350
<2.5 mm 240 +0/-5°C 225 +0/-5°C
2.5 mm 225 +0/-5°C 225 +0/-5°C
Table 2. Pb-free Process Package Classification Reflow Temperatures
Package Thickness Volume mm3
<350 Volume mm3
350-2000 Volume mm3
>2000
<1.6 mm 260 +0°C* 260 +0°C* 260 +0°C*
1.6 mm 2.5 mm 260 +0°C* 250 +0°C* 245 +0°C*
2.5 mm 250 +0°C* 245 +0°C* 245 +0°C*
*Tolerance: The device manufacturer/supplier shall assure process compatibility up to and including the stated
classification temperature (this means Peak reflow temperature +0°C. For example 260°C+0°C) at the rated MSL
level.
Customer Service
Anpec Electronics Corp.
Head Office :
No.6, Dusing 1st Road, SBIP,
Hsin-Chu, Taiwan, R.O.C.
Tel : 886-3-5642000
Fax : 886-3-5642050
Taipei Branch :
2F, No. 11, Lane 218, Sec 2 Jhongsing Rd.,
Sindian City, Taipei County 23146, Taiwan, R. O. C.
Tel : 886-2-2910-3838
Fax : 886-2-2917-3838
Classification Reflow Profiles (Cont.)