Spec Sheet
http://www.ty-top.com
The data is reference only. Electrical characteristics vary depending on environment or measurement condition.
TAIYO YUDEN reserves the right to make change to the data at any time without notice.
Before making final selection, please check product specification.
Medium-High Voltage Multilayer Ceramic Capacitors
HMK325B7104MF-T
Features
Item Summary
0.1uF±20%, 100V,
X7R, 1210/3225 (EIA/JIS)
Lifecycle Stage
Mass Production
Standard packaging quantity (minimum)
Taping Embossed 2000pcs
Products characteristics table
Capacitance 0.1 uF ± 20 %
Case Size (EIA/JIS) 1210/3225
Rated Voltage 100 V
tanδ (max) 3.5 %
Temperature Characteristic (EIA) X7R
Operating Temp. Range (EIA) -55 to +125 ℃
High Temperature Loading 200 %
(% Rated Voltage)
Insulation Resistance (min) 100 MΩ·μF
RoHS Compliance (10 subst.) Yes
REACH Compliance (197 subst.) Yes
Halogen Free Yes
Soldering Reflow
External Dimensions
Dimension L 3.2 ±0.30 mm
Dimension W 2.5 ±0.20 mm
Dimension T 1.15 ±0.10 mm
Dimension e 0.60 ±0.30 mm
2019.07.12
Powered by TCPDF (www.tcpdf.org) 1 / 1
Multi Layer Ceramic Capacitor -Electrical Characteristics Data- 16QA02
RoHS compliance product
HMK325B7104MF
100V 3225 X7R 0.1uF +/- 20% t=1.25mmMAX
100V 1210 X7R 0.1uF +/- 20% t=0.049inchMAX
0.01
0.1
1
10
100
0.001 0.01 0.1 1 10 100 1000 10000
Capacitance[uF]
Frequency[MHz]
HMK325B7104MF
Capacitance Freq.
-30
-20
-10
0
10
dC/C[%]
HMK325B7104MF
DC Bias Char.
01
1
10
100
1000
10000
Z
,ESR[OHM]
HMK325B7104MF
Impedance,ESR Freq.
ESR
Z
部品特性は設置環境、測定条件等により変化する場合があります。本データをご使用される際は実際の製品特性に対する参考
データとしてご活用ください。また、本データは予告無く追加・削除及び変更を行う場合があります。ご注文の際は、納入仕様書の
ご確認をお願いします。
The data is reference only. Electrical characteristics vary depending on environment or measurement condition.
TAIYO YUDEN reserves the right to make change to the data at any time without notice.
Before making final selection, please check product specification.
-50
-40
-30
-
20
0 20406080100
dC/
C
DC Bias Volta ge[V]
0.001
0.01
0.1
1
0.001 0.01 0.1 1 10 100 1000 10000
Z,ESR[
O
Frequency[MHz]
-30
-20
-10
0
10
-55 -35 -15 5 25 45 65 85 105 125
dC/C[%]
Temperature[degreeC]
HMK325B7104MF
Capacitance Temp.
1
10
100
00.511.522.533.5
dTemp.[degreeC]
Ripple Current[Arms]
HMK325B7104MF
Ripple Current
10kHz
100kHz
1MHz
Notice for TAIYO YUDEN Products
Please read this notice before using the TAIYO YUDEN products.
Please conduct validation and verification of our products in actual condition of mounting and operating environment before using our
products.
The product listed in this spec sheet is intended for use in general electronic equipment (e.g., AV equipment, OA equipment, home electric
appliances, office equipment, information and communication equipment including, without limitation, mobile phone, and PC) and medical
equipment classified as Class I or II by IMDRF. Please be sure to contact TAIYO YUDEN for further information before using the products for any
equipment which may directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation,
automotive powertrain control system, train control system, and ship control system, traffic signal equipment, disaster prevention equipment,
medical equipment classified as Class III by IMDRF, highly public information network equipment including, without limitation, telephone
exchange, and base station).
Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g., aerospace equipment,
aviation equipment*, medical equipment classified as Class IV by IMDRF, nuclear control equipment, undersea equipment, military
equipment).
*Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g., in-flight
entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN. Please be sure to
contact TAIYO YUDEN for further information before using our products for such aviation equipment.
When our products are used even for high safety and/or reliability-required devices or circuits of general electronic equipment, it is strongly
recommended to perform a thorough safety evaluation prior to use of our products and to install a protection circuit as necessary.
Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way responsible for any damages
incurred by you or third parties arising from use of the product listed in this spec sheet for any equipment requiring inquiry to TAIYO YUDEN or
prohibited for use by TAIYO YUDEN as described above.
Information contained in this spec sheet is intended to convey examples of typical performances and/or applications of our products and is not
intended to make any warranty with respect to the intellectual property rights or any other related rights of TAIYO YUDEN or any third parties
nor grant any license under such rights.
Please note that the scope of warranty for our products is limited to the delivered our products themselves and TAIYO YUDEN shall not be in
any way responsible for any damages resulting from a fault or defect in our products. Notwithstanding the foregoing, if there is a written
agreement (e.g., supply and purchase agreement, quality assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will
warrant our products in accordance with such agreement.
The contents of this spec sheet are applicable to our products which are purchased from our sales offices or authorized distributors
(hereinafter “TAIYO YUDEN’s official sales channel”). Please note that the contents of this spec sheet are not applicable to our products
purchased from any seller other than TAIYO YUDEN’s official sales channel.
Caution for Export
The product listed in this spec sheet may require specific procedures for export according to “U.S. Export Administration Regulations”, “Foreign
Exchange and Foreign Trade Control Law” of Japan, and other applicable regulations. Should you have any questions on this matter, please
contact our sales staff.
REMINDERS