MBRB1645-E3/31 - Vishay [Semiconductors]

MBR(F,B)1635 thru MBR(F,B)1660

www.vishay.com Vishay General Semiconductor

Revision: 14-Jun-12 1Document Number: 88671

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Schottky Barrier Rectifier

FEATURES

• Guardring for overvoltage protection

• Low power loss, high efficiency

• Low forward voltage drop

• High forward surge capability

• High frequency operation

• Meets MSL level 1, per J-STD-020, LF maximum peak of

245 °C (for TO-263AB package)

• Solder bath temperature 275 °C maximum, 10 s, per

JESD 22-B106 (for TO-220AC and ITO-220AC package)

• AEC-Q101 qualified

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS

For use in low voltage, high frequency rectifier of switching

mode power supplies, freewheeling diodes, DC/DC

converters and polarity protection application.

MECHANICAL DATA

Case: TO-220AC, ITO-220AC, TO-263AB

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3 - RoHS-compliant, commercial grade

Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified

Terminals: Matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix

meets JESD 201 class 2 whisker test

Polarity: As marked

Mounting Torque: 10 in-lbs maximum

PRIMARY CHARACTERISTICS

IF(AV) 16 A

VRRM 35 V to 60 V

IFSM 150 A

VF 0.57 V, 0.65 V

TJ max. 150 °C

CASE

PIN 2

PIN 1

TO-220AC

MBR16xx

ITO-220AC

MBRF16xx

MBRB16xx

PIN 1

PIN 2

HEATSINK

PIN 2

PIN 1

TO-263AB

MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)

PARAMETER SYMBOL MBR1635 MBR1645 MBR1650 MBR1660 UNIT

Maximum repetitive peak reverse voltage VRRM 35 45 50 60

VWorking peak reverse voltage VRWM 35 45 50 60

Maximum DC blocking voltage VDC 35 45 50 60

Maximum average forward rectified current

at TC = 125 °C IF(AV) 16

Peak forward surge current 8.3 ms single half

sine-wave superimposed on rated load IFSM 150

Peak repetitive reverse current at tp = 2.0 µs, 1 kHz IRRM 1.0 0.5

Voltage rate of change (rated VR) dV/dt 10 000 V/μs

Operating junction temperature range TJ- 65 to + 150 °C

Storage temperature range TSTG - 65 to + 175

Isolation voltage (ITO-220AC only)

from terminal to heatsink t = 1 min VAC 1500 V

MBR(F,B)1635 thru MBR(F,B)1660

www.vishay.com Vishay General Semiconductor

Revision: 14-Jun-12 2Document Number: 88671

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

(1) Pulse test: 300 μs pulse width, 1 % duty cycle

(2) Pulse test: Pulse width  40 ms

Note

(1) AEC-Q101 qualified

ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)

PARAMETER SYMBOL TEST CONDITIONS MBR1635 MBR1645 MBR1650 MBR1660 UNIT

Maximum instantaneous forward voltage VF (1) IF = 16 A TC = 25 °C 0.63 0.75 V

IF = 16 A TC = 125 °C 0.57 0.65

Maximum instantaneous reverse current

at DC blocking voltage IR (1) Rated VR

TC = 25 °C 0.2 1.0 mA

TC = 125 °C 40 50

THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)

PARAMETER SYMBOL MBR MBRF MBRB UNIT

Typical thermal resistance from junction to case RJC 1.5 3.0 1.5 °C/W

ORDERING INFORMATION (Example)

PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE

TO-220AC MBR1645-E3/45 1.80 45 50/tube Tube

ITO-220AC MBRF1645-E3/45 1.94 45 50/tube Tube

TO-263AB MBRB1645-E3/45 1.33 45 50/tube Tube

TO-263AB MBRB1645-E3/81 1.33 81 800/reel Tape and reel

TO-220AC MBR1645HE3/45 (1) 1.80 45 50/tube Tube

ITO-220AC MBRF1645HE3/45 (1) 1.94 45 50/tube Tube

TO-263AB MBRB1645HE3/45 (1) 1.33 45 50/tube Tube

TO-263AB MBRB1645HE3/81 (1) 1.33 81 800/reel Tape and reel

MBR(F,B)1635 thru MBR(F,B)1660

www.vishay.com Vishay General Semiconductor

Revision: 14-Jun-12 3Document Number: 88671

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

RATINGS AND CHARACTERISTICS CURVES

(TA = 25 °C unless otherwise noted)

Fig. 1 - Forward Current Derating Curve

Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current

Fig. 3 - Typical Instantaneous Forward Characteristics

Fig. 4 - Typical Reverse Characteristics

Fig. 5 - Typical Junction Capacitance

Fig. 6 - Typical Transient Thermal Impedance

050 100 150

Resistive or Inductive Load

Average Forward Current (A)

Case Temperature (°C)

110 100

100

125

150

= T

Max.

8.3 ms Single Half Sine-Wave

Number of Cycles at 60 Hz

Peak Forward Surge Current (A)

00.2 0.4 0.6 0.81.0 1.2

0.01

0.1

100

MBR1635 - MBR1645

MBR1650 - MBR1660

= 150 °C

= 25 °C

Instantaneous Forward Voltage (V)

Instantaneous Forward Current (A)

Pulse Width = 300 µs

1 % Duty Cycle

020 40 60 80100

0.001

0.01

0.1

100

TJ = 125 °C

TJ = 75 °C

TJ = 25 °C

MBR1635 - MBR1645

MBR1650 - MBR1660

Percent of Rated Peak Reverse Voltage (%)

Instantaneous Reverse Current (mA)

0.1 110 100

100

1000

10 000

MBR1635 - MBR1645

MBR1650 - MBR1660

TJ = 25 °C

f = 1.0 MHz

Vsig = 50 mVp-p

Reverse Voltage (V)

Junction Capacitance (pF)

0.01 0.1 110 100

0.1

100

t - Pulse Duration (s)

Transient Thermal Impedance (°C/W)

MBR(F,B)1635 thru MBR(F,B)1660

www.vishay.com Vishay General Semiconductor

Revision: 14-Jun-12 4Document Number: 88671

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

TO-220AC

CASE

PIN2

PIN1

0.635 (16.13)

0.625 (15.87)

0.415 (10.54) MAX.

0.154 (3.91) DIA.

0.148 (3.74) DIA.

0.113 (2.87)

0.103 (2.62)

0.370 (9.40)

0.360 (9.14)

0.160 (4.06)

0.140 (3.56)

0.057 (1.45)

0.045 (1.14)

0.105 (2.67)

0.095 (2.41) 0.037 (0.94)

0.027 (0.68)

0.205 (5.20)

0.195 (4.95)

0.022 (0.56)

0.014 (0.36)

1.148 (29.16)

1.118 (28.40)

0.560 (14.22)

0.530 (13.46)

0.110 (2.79)

0.100 (2.54)

0.350 (8.89)

0.330 (8.38)

0.145 (3.68)

0.135 (3.43)

0.603 (15.32)

0.573 (14.55)

0.055 (1.39)

0.045 (1.14)

0.185 (4.70)

0.175 (4.44)

ITO-220AC

0.025 (0.64)

0.015 (0.38)

0.404 (10.26)

0.384 (9.75)

0.076 (1.93) REF.

45° REF.

0.600 (15.24)

0.580 (14.73)

0.560 (14.22)

0.530 (13.46)

0.035 (0.89)

0.025 (0.64)

0.205 (5.21)

0.195 (4.95)

0.191 (4.85)

0.171 (4.35)

0.057 (1.45)

0.045 (1.14)

0.671 (17.04)

0.651 (16.54)

0.028 (0.71)

0.020 (0.51)

0.110 (2.79)

0.100 (2.54)

7° REF.

0.350 (8.89)

0.330 (8.38)

0.140 (3.56) DIA.

0.125 (3.17) DIA.

0.135 (3.43) DIA.

0.122 (3.08) DIA.

0.110 (2.79)

0.100 (2.54)

0.190 (4.83)

0.170 (4.32)

TO-263AB

Mounting Pad Layout

0.670 (17.02)

0.591 (15.00)

0.105 (2.67)

0.095 (2.41)

0.08 (2.032) MIN.

0.15 (3.81) MIN.

0.33 (8.38) MIN.

0.42 (10.66) MIN.

0.140 (3.56)

0.110 (2.79)

0.021 (0.53)

0.014 (0.36)

0.110 (2.79)

0.090 (2.29)

0 to 0.01 (0 to 0.254)

0.055 (1.40)

0.047 (1.19)

0.055 (1.40)

0.045 (1.14)

0.190 (4.83)

0.160 (4.06)

0.205 (5.20)

0.195 (4.95)

0.624 (15.85)

0.591 (15.00)

0.037 (0.940)

0.027 (0.686)

0.105 (2.67)

0.095 (2.41)

0.360 (9.14)

0.320 (8.13)

0.411 (10.45)

0.380 (9.65)

0.245 (6.22)

MIN.

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 12-Mar-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.