38 Super Capacitors Vol.03
FR Series W ide Temperature R ange C apacitor [ –40˚C to +85˚C]
The FR series Super Capacitors are small-size electric double-layer capacitors that can operate in a temperature range
as wide as –40˚C to +85˚C.
These capacitors are ideal as long-time backup devices for minute current loads in industrial equipment such as measuring
instruments, control equipment, and communications equipment.
Features
• Wide operating temperature range: –40˚C to +85˚C
• High reliability (Ioad life of 85˚C, 5.5 V, 1000 hours guaranteed)
• Excellent voltage holding characteristics ideal for long-time current supply of 1
μ
A to several hundred
μ
A
Applications
Backup of CMOS microcomputers, static RAMs, and DTSs (digital tuning systems)
Part Number System
FR 0H 223 Z F
Environmental Impact Reduced Product
Capacitance tolerance:
Z: +80%, –20%
Nominal capacitance: 0.022 F
First two digits represent significant figures.
Third digit specifies number of zeros to follow.
Maximum rated voltage:
0H: 5.5 VDC
Super Capacitor: FR series
Super Capacitors Vol.03 39
Markings
Part Number
FR0H223ZF
FR0H473ZF
FR0H104ZF
FR0H224ZF
FR0H474ZF
FR0H105ZF
Max.
Rated Voltage
(V)
5.5
5.5
5.5
5.5
5.5
5.5
Charge System
(F)
0.022
0.047
0.10
0.22
0.47
1.0
Max. ESR
(at 1 kHz)
(Ω)
220
110
150
180
100
60
Max. Current at
30 minutes
(mA)
0.033
0.071
0.15
0.33
0.71
1.5
Voltage
Holding
Characteristic
Min. (V)
4.2
4.2
4.2
4.2
4.2
4.2
Dimensions
P±0.5
D±0.5
0.3 Min.
H Max.
L Min.
d1±0.1
d2±0.1
Insulation
sleeve
Lead
connected
to case
Negative polarity LEAD
φ
–
Sleeve
Lead connected
to case
NEGATIVE POLARITY
Negative polarity
identification mark
V0
5.5V
V0
001 FR
85˚C
0.022F
Date code
–
Marking of sleeve
5.5V
FR
85˚C
0.022F
Part No.
FR0H223ZF
FR0H473ZF
FR0H104ZF
FR0H224ZF
FR0H474ZF
FR0H105ZF
D
11.5
(0.453)
14.5
(0.571)
14.5
(0.571)
14.5
(0.571)
16.5
(0.650)
21.5
(0.850)
H
14.0
(0.551)
14.0
(0.551)
15.5
(0.610)
21.0
(0.827)
21.5
(0.846)
22.0
(0.866)
P
5.08
(0.200)
5.08
(0.200)
5.08
(0.200)
5.08
(0.200)
5.08
(0.200)
7.62
(0.300)
d1
0.4
(0.016)
0.4
(0.016)
0.4
(0.016)
0.4
(0.016)
0.4
(0.016)
0.6
(0.024)
d2
1.2
(0.047)
1.2
(0.047)
1.2
(0.047)
1.2
(0.047)
1.2
(0.047)
1.2
(0.047)
L
2.7
(0.106)
2.4
(0.095)
2.4
(0.095)
2.4
(0.095)
2.7
(0.106)
3.0
(0.118)
Dimensions mm (inch) Weight
g (oz)
2.3
(0.081)
3.9
(0.138)
4.3
(0.152)
5.3
(0.187)
7.5
(0.265)
13.3
(0.470)
Note: Weight is typical.
Discharge System
(F)
0.028
0.060
0.15
0.33
0.75
1.6
Nominal Capacitance
Standard Ratings
40 Super Capacitors Vol.03
Specifications: FR Series
Specifications
–40˚C to +85˚C
5.5 Vdc
Refer to standard ratings
+80 %, –20 %
Refer to standard ratings
Refer to standard ratings
Capacitance More than 90 % of initial requirement
Equivalent Series Resistance
Not to exceed 120 % of initial requirement
Current at 30 minutes
Not to exceed 120 % of initial requirement
Capacitance More than 50 % of initial value
Equivalent Series Resistance
Not to exceed 4 times initial value
Capacitance More than 30 % of initial value
Equivalent Series Resistance
Not to exceed 7 times initial value
Capacitance Not to exceed 200 % of initial value
Equivalent Series Resistance
Not to exceed initial requirement
Current at 30 minutes
Not to exceed 1.5 CV (mA)
Capacitance Within ±20 % of initial value
Equivalent Series Resistance
Not to exceed initial requirement
Current at 30 minutes
Not to exceed initial requirement
No loosening nor permanent damage of the leads
Capacitance Meet initial requirement
Equivalent Series Resistance
Meet initial requirement
Current at 30 minutes
Meet initial requirement
3/4 or more of the pin surface shoud be covered with new solder
Capacitance Meet initial requirement
Equivalent Series Resistance
Meet initial requirement
Current at 30 minutes
Meet initial requirement
Capacitance Meet initial requirement
Equivalent Series Resistance
Meet initial requirement
Current at 30 minutes
Meet initial requirement
Capacitance Within ±20% of initial value
Equivalent Series Resistance
Not to exceed120 % of initial requirement
Current at 30 minutes
Not to exceed120 % of initial requirement
Item
Operating Temperature Range
Maximun Working Voltage
Nominal Capacitance Range
Capacitance Allowance
Equivalent Series Resistance
Current (30-minute Value)
Surge Voltage
Phase 2
Phase 3
Phase 5
Phase 6
Lead Strength (Tensile)
Vibration Resietance
Solderability
Soldering Heat
Resistance
Temperature Cycle
Humidity Resistance
Test Conditions
Conforming to JIS C 5102-1994
Refer to characteristics measuring conditions
Refer to characteristics measuring conditions
Refer to characteristics measuring conditions
Conform to 7.14
Surge voltage 6.3 V
Temperature : 85±2˚C
Charge: 30 sec.
Discharge: 9 min. 30 sec.
1 000 cycles
Charge resistance:
0.022 F 560 Ω
0.047 F 300 Ω
0.10 F 150 Ω
0.22 F 56 Ω
0.47 F 30 Ω
1.0 F 15 Ω
Discharge resistance:
Not applicable (0 Ω)
Conform to 7.12
Phase 1: +25±2˚C
Phase 2: –25±2˚C
Phase 3: –40±2˚C
Phase 4: +25±2˚C
Phase 5: +85±2˚C
Phase 6: +25±2˚C
Conform to 8.1.2 (1)
0.022 to 0.47 F: 1 kg, 10 sec.
1 F: 2.5 kg, 10 sec.
Conform to 8.2.3
Frequency: 10 to 55 Hz
Test duration: 6 hours
Conform to 8.4
245 ±5˚C
5 ±0.5 sec. 1.6 mm from body
Conform to 8.5
260 ±10˚C, 10 ±1 sec.
Immersion depth:
1.6 mm from body
Conform to 9.5
40 ±2˚C, 90 to 95% RH
240 ± 8 hours
Temperature
Variation of
Characteristics
Conform to 9.3
Temperature condition:
–40°C → normal temperature
→ +85°C → normal temperature
Number of cycles: 5 cycles
Super Capacitors Vol.03 41
Specifications
Capacitance change Within ±30% of initial value
Equivalent Series Resistance
Not to exceed 200% of initial requirement
Current at 30 minutes
Not to exceed 200% of initial requirement
Voltage between terminal leads higher than 4.2V
Test Conditions
Conforming to JIS C 5102-1994
(1) Applied V oltage: 5.0 V
(2) Series Resistance: 0 Ω
(3) Charging time: 24 h
(1) Load: Nothing
(2) Temp.: Less than 25°C
(3) Humidity: Less than 70% RH
(4) Storage time: 24 h
Item
High
Temperature
Load
Voltage Holding
Characteristics
Charging
Storege
Conforms to 9.10
Temperature: 85 ± 2°C
Series resistance: 0 Ω
Applied voltage: 5.5 VDC
Time of test: 1000 hours
+48
–0
