E-Series Surface Mount Mixer
5 – 1000 MHz MAMXES0115
V4
1 North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
India Tel: +91.80.4155721 China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and prod uct information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Features
LO Power +7 dBm
Up to +1 dBm RF
Surface Mount
Low Profile
RoHS* Compliant version of the ELCM-2
Tape and reel packagi ng available
Description
M/A-COM’s MAMXES0115 is a RoHS compliant de-
vice that is equivalent to the ELCM-2 mixer. This
device is a Low Cost, Broadband, high performance
Double Balanced Mixer designed for use in high
volume wireless applications. The device has been
optimised by careful selection of the Schottky Diode
and Balun Transformer for excellent performance.
The MAMXES0115 mixer is offered in an SM-89
surface mount package and is designed to be util-
ized in both standard reflow and high temperature
soldering reflow profiles.
Ordering Information
Part Number Package
MAMXES0115 Tape and Reel (900 pieces/ Reel)
Outline Drawing — SM-89
Electrical Specifications: @ +25°C, Z0 = 50 Ohms, LO = +7dBm
Parameter Test Conditions Frequency Units Min Typ Max
RF Frequency 5 - 1000 MHz
LO Frequency 5 - 1000 MHz
IF Frequency DC - 1000 MHz
Conversion Loss 10 - 500 MHz
5 - 1000 MHz dB
dB
6.5
7.0 8.0
9.5
Isolation (LO - RF) 5 - 50 MHz
50 - 500 MHz
500 - 1000 MHz
dB
dB
dB
40
20
18
50
40
25
Isolation (LO - IF) 5 - 50 MHz
50 - 500 MHz
500 - 1000 MHz
dB
dB
dB
45
20
12
55
30
20
RF Input for 1 dB Com-
pression dBm +1
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
E-Series Surface Mount Mixer
5 – 1000 MHz MAMXES0115
V4
2 North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
India Tel: +91.80.4155721 China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and prod uct information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Pin Configuration
Pin No. Function
1 LO
2 Ground
3 Ground
4 RF
5 IF
6 Ground
Absolute Maximum Ratings 1
1. Operation of this device above any one of these parameters
may cause permanent damage.
Parameter Absolute Maximum
Max RF Power 50 mW
Peak IF Current 40 mA
Operating Temperature -55°C to +100°C
Storage Temperature -65°C to +125°C
Pin Temperature (10 sec-
onds) 260° C
L-R Isolation
Typical Performance Curves
Conversion Loss
L-I Isolation
0
10
20
30
40
50
60
5 200 400 600 800 1000
Frequency (MHz)
dB
6
6.5
7
7.5
8
8.5
9
5 200 400 600 800 1000
Frequency (MHz)
dB
0
10
20
30
40
50
60
5 200 400 600 800 1000
Frequency (MHz)
dB