TB62003,004,006009P/F/FW
2001-07-04
1
TOSHIBA BiCMOS INTEGRATED CIRCUIT SILICON MONOLITHIC
TB62003P,TB62003F,TB62003FW,TB62004P,TB62004F,TB62004FW,TB62006P
TB62006F,TB62006FW,TB62007P,TB62007F,TB62007FW,TB62008P,TB62008F
TB62008FW,TB62009P,TB62009F,TB62009FW
8CH DMOS TRANSISTOR ARRAY WITH GATE
TB62003P, TB62003F, TB62003FW
INVERTER & DMOS DRIVER
TB62004P, TB62004F, TB62004FW
THROUGH & DMOS DRIVER
TB62006P, TB62006F, TB62006FW
NAND & DMOS DRIVER
TB62007P, TB62007F, TB62007FW
AND & DMOS DRIVER
TB62008P, TB62008F, TB62008FW
NOR & DMOS DRIVER
TB62009P, TB62009F, TB62009FW
OR & DMOS DRIVER
The TB62003 Series are highvoltage, highcurrent arrays
comprised of eight Nch DMOS pairs.
FEATURES
Package : TypeP DIP20 pin
TypeF SOP20 pin (200 mil)
TypeFW SOL20 pin (300 mil)
Output rating : 35 V (Min.) / 200 mA (Max.)
Low power
Weight
DIP20P3002.54 A : 2.25 g (Typ.)
SOP20P3001.27 : 0.25 g (Typ.)
SOL20P3001.27 : 0.48 g (Typ.)
TB62003,004,006009P/F/FW
2001-07-04
2
PIN CONNECTION (TOP VIEW)
TB62003P / F / FW TB62004P / F / FW
TB62003P / F / FW TB62007P / F / FW
TB62008P / F / FW TB62009P / F / FW
TB62003,004,006009P/F/FW
2001-07-04
3
TRUTH TABLE
TB62006P / F / FW
INPUT OUTPUT
I1~4 I5~8 CONT1~4 CONT5~8 O3~4 O5~8
H X H X OFF NOT FIX
H X L X ON NOT FIX
L X H X ON NOT FIX
L X L X ON NOT FIX
X H X H NOT FIX OFF
X H X L NOT FIX ON
X L X H NOT FIX ON
X L X L NOT FIX ON
X: Don’t Care
TB62007P / F / FW
INPUT OUTPUT
I1~4 I5~8 CONT1~4 CONT5~8 O3~4 O5~8
H X H X ON NOT FIX
H X L X OFF NOT FIX
L X H X OFF NOT FIX
L X L X OFF NOT FIX
X H X H NOT FIX ON
X H X L NOT FIX OFF
X L X H NOT FIX OFF
X L X L NOT FIX OFF
X: Don’t Care
TB62003,004,006009P/F/FW
2001-07-04
4
TB62008P / F / FW
INPUT OUTPUT
I1~4 I5~8 CONT1~4 CONT5~8 O3~4 O5~8
H X H X OFF NOT FIX
H X L X OFF NOT FIX
L X H X OFF NOT FIX
L X L X ON NOT FIX
X H X H NOT FIX OFF
X H X L NOT FIX OFF
X L X H NOT FIX OFF
X L X L NOT FIX ON
X: Don’t Care
TB62009P / F / FW
INPUT OUTPUT
I1~4 I5~8 CONT1~4 CONT5~8 O3~ 4 O5~8
H X H X ON NOT FIX
H X L X ON NOT FIX
L X H X ON NOT FIX
L X L X OFF NOT FIX
X H X H NOT FIX ON
X H X L NOT FIX ON
X L X H NOT FIX ON
X L X L NOT FIX OFF
X: Don’t Care
TB62003,004,006009P/F/FW
2001-07-04
5
MAXIMUM RATINGS (Ta = 25°C)
CHARACTERISTIC SYMBOL RATING UNIT
Supply Voltage VDD 7 V
DC Output Voltage VDS 0.5~35 V
DC Output Current IDS 200 mA / ch
DC Input Voltage VIN 0.4+VDD+0.4 V
DC Input Current IIN ±5 mA
Input Diode Current IID ±5 mA
Output Diode Current IOK 5 mA
P 1.47
F 0.96 (Note 1)
Power Dissipation
FW
PD
1.00 (Note 2)
W
Operating Temperature Topr 40~85 °C
Storage Temperature Tstg 55~150 °C
Note 1: On Glass Epoxy PCB (50 × 50 × 1.6 mm Cu 40%)
Note 2: Delated above 25°C in the proportion of 7.7 mW / °C (F Type), 8.0 mW / °C (FW Type).
RECOMMENDED OPERATING CONDITION (Ta = 40~85°C)
CHARACTERISTIC SYMBOL CONDITION MIN TYP. MAX UNIT
Supply Voltage Range VDD 4.5 5.5 V
DC Output Voltage VDS 30 V
P 170
F 90
FW
Duty 80%
140
P 150
F 80
DC Output Current
FW
IDS
Duty 100%
8ch On
VDD = 5.0 V
120
mA /
ch
DC Input Voltage VIN GND V
DD V
TB62003,004,006009P/F/FW
2001-07-04
6
ELECTRICAL CHARACTERISTICS (Ta = 25°C, VDD = 5.0 V)
CHARACTERISTIC SYMBOL
TEST
CIR
CUIT
TEST CONDITION MIN TYP. MAX UNIT
Output Leakage Current IOZ V
DS = 35 V 50 µA
VDS I
DS = 150 mA 0.70 0.8
LowLevel Output Voltage I
DS = 200 mA 0.94 1.2
V
Output Resistance RON I
DS = 200 mA 4.7 6.0
DC Input Current IIN V
IN = GND, VIN = VDD ±1.0 µA
VIN (H) 3.5 VDD
+0.4 V
HighLevel Input Voltage
VIN (L) 0.4 1.5
Operating Supply Current IDDopr 8ch On, Output open
fIN = 1MHz 2 µA
Output Diode Forward Voltage VFK I
OK = 5 mA 0.6 V
TurnOn Delay tON I
OUT = 170 mA 300
TurnOff Delay tOFF 300
ns
Supply Current IDD 10 µA
Input Capacitance CIN 15 pF
PRECAUTIONS for USING
This IC does not integrate protection circuits such as overcurrent and overvoltage protectors.
Thus, if excess current or voltage is applied to the IC, the IC may be damaged. Please design the IC so that
excess current or voltage will not be applied to the IC.
Utmost care is necessary in the design of the output line, VCC (VDD) and GND line since IC may be destroyed
due to shortcircuit between outputs, air contamination fault, or fault by improper grounding.
TB62003,004,006009P/F/FW
2001-07-04
7
PACKAGE DIMENSIONS
DIP20P3002.54A Unit: mm
Weight: 2.25 g (Typ.)
TB62003,004,006009P/F/FW
2001-07-04
8
PACKAGE DIMENSIONS
SOP20P3001.27 Unit: mm
Weight: 0.25 g (Typ.)
TB62003,004,006009P/F/FW
2001-07-04
9
PACKAGE DIMENSIONS
SOL20P3001.27 Unit: mm
Weight: 0.48 g (Typ.)
TB62003,004,006009P/F/FW
2001-07-04
10
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
The products described in this document are subject to the foreign exchange and foreign trade laws.
The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.
The information contained herein is subject to change without notice.
000707EB
A
RESTRICTIONS ON PRODUCT USE