NLP150L-96T536 - Artesyn Embedded Technologies

The NLP150L series of 150 Watt ac-dc open-frame power supplies

are available with single, triple or quad outputs. The quad output

versions described in this datasheet are housed in a 3.8 x 7.8 x

1.26 inch package. All NLP150L series power supplies are

harmonic current corrected to meet the EN61000-3-2 standard,

and support current sharing. The power supplies are designed for

use in 1U shelves or boxes, and are primarily intended for

networking applications that have a heavy logic content, such as

access concentrators, midrange routers, LAN switches and shared

media hubs.

Embedded Power for

Business-Critical Continuity

NLP150L Series

Quad output

Special Features

• 90 VAC to 264 VAC

universal input range

• Provides low voltage

outputs (3.3 V)

• EN61000-3-2 compliant

• Overvoltage and

short circuit protection

• Power fail detection

• Current sharing

(on VA and VB)

• 3.8 x 7.8 x 1.26 inches

• UL, CSA and VDE

safety approvals and

CE-marked to LVD

• Compliance to EN55022-B

conducted noise standard

• Compliance to EN55022-A

radiated noise standard

• Meets all applicable and

relevant immunity standards

EN61000-4-2, -3, -4, -5 and -6

• Available RoHS compliant

• 2 year warranty

Total Power: 110-150W

Input Voltage: 90 - 264VAC

# of Outputs: Quad

Safety

VDE 0805/EN60950/IEC950

File No. 10401-3336-0162/47587

Licence No. 123897

UL1950 File No. E136005

CSA C22.2 No. 950

File No. LR41062C

Rev.02.20.07

NLP150L Series

1 of 5

Rev.02.20.07

NLP150L Series

2 of 5

Embedded Power for

Business-Critical Continuity

All specifications are typical at nominal input, full load at 25°C unless otherwise stated

Specifications

EMC CHARACTERISTICS (continued) (10)

Surge EN61000-4-5 Level 3

Fast transients EN61000-4-4 Level 3

Radiated immunity EN61000-4-3 Level 3

Conducted immunity EN61000-4-6 Level 3

GENERAL SPECIFICATIONS

Hold-up time 120 Vac @ 60 Hz 20 ms @ 150 W

Efficiency 120 Vac @ 150 W 73% typical

Isolation voltage Input/output 3000 Vac

Input/chassis 1500 Vac

Approvals and EN60950, VDE0805, IEC950

standards pending UL1950, CSA C22.2 No. 950

Weight 540 g (19 oz)

MTBF (@ 25°C) MIL-HDBK-217F 350,000 hours min.

Bellcore 800,000 hours min.

ENVIRONMENTAL SPECIFICATIONS (8)

Thermal performance Operating ambient, 0 °C to +50 °C

(See derating curve)

Non-operating -40 °C to +85 °C

50 °C to 70 °C ambient, Derate to

convection cooled 50% load

0 °C to 50 °C ambient, 110 W

convection cooled

0 °C to 50 °C ambient, 150 W

300 LFM forced air

Peak (0 °C to +50 °C)

Relative humidity Non-condensing 5% to 95% RH

Altitude Operating 10,000 feet max.

Non-operating 30,000 feet max.

Vibration (See Note 6) 5-500 Hz 2.4 G rms peak

Shock per MIL-STD-810E 516.4 Part IV

OUTPUT SPECIFICATIONS

Total regulation Main output ±2.0%

(Line and load) Auxiliary outputs ±5.0%

Rise time At turn-on 1.5 s, max.

Transient response Main output 5.0% or 250 mV

75% to 100% max. dev., 1 ms max.

step at 0.1 A/μs recovery to 1%

Temperature coefficient ±0.02%/°C

Overvoltage protection Main outputs 125%, ±10%

Short circuit protection Cyclic operation Continuous

Minimum output current Single and multiple See table

INPUT SPECIFICATIONS

Input voltage range Universal input 90-264 Vac

Input frequency range 47-63 Hz

Input surge current 264 Vac (cold start) 40 A max.

Safety ground 264 Vac, 60Hz 0.99 mA

leakage current

Input current 120 Vac @ 150 W 1.95 A rms

230 Vac @ 150 W 1.10 A rms

Input fuse UL/IEC127 F3.15A H, 250 Vac

EMC CHARACTERISTICS (10)

Conducted emissions EN55022, FCC part 15 Level B

Radiated emissions EN55022, FCC part 15 Level A

Harmonic current EN61000-3-2 Compliant

emission correction

ESD air EN61000-4-2 Level 3

ESD contact EN61000-4-2 Level 3

Rev.02.20.07

NLP150L Series

3 of 5

Embedded Power for

Business-Critical Continuity

Specifications Contd.

Notes

1Free air convection.

Multiple output units: maximum continuous output power not to exceed 110

W and the output current not to exceed: IA+IB+2(IC+ID)≤23 A.

2300 LFM forced air cooling from the longer side.

Multiple output units: maximum continuous output power not to exceed 150

W and the output current not to exceed: IA+IB+2(IC+ID)≤32 A.

3Peak output current lasting less than 30 seconds with duty cycle less than 5%.

During peak loading, output voltage may exceed total regulation limits.

4Figure is peak-to-peak for room temperature rating. Output noise

measurements are made across a 20 MHz bandwidth using a 6 inch twisted

pair, terminated with a 10 μF electrolytic capacitor and a 0.1 μF ceramic

capacitor.

5Minimum load required for correct start-up and operation on single outputs

and on main output of multiple versions. Failure to observe minimum load on

main output will not allow the supply to start-up correctly. Some electronic test

loads have a large delay time before they start drawing current even though the

voltage from the supply is present. During this time delay, there is no load on

the output and as a result, the supply may not be able to start-up properly and

maintain its correct output voltage. In these instances, a dummy resistive load

across the output may be necessary to load the output of the supply until the

test load can function correctly and draw the intended minimum load.

Minimum load required on auxiliary outputs to maintain regulation.

6Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G rms 5

Hz to 500 Hz.

7For optimum reliability no part of the heatsink should exceed 110 °C and no

semi-conductor case temperature should exceed 120 °C.

8CAUTION: Allow a minimum of 1 second after disconnecting line power when

making thermal measurements.

9This product is only for inclusion by professional installers within other

equipment and must not be operated as a stand alone product.

10 Conducted EMI specifications reference measurements made with the power

supply mounted on a grounded metal sheet extending 1 inch beyond each

edge, using an unshielded cable. No external filtering required during

conducted emissions testing but some applications may require additional

filtering to achieve system compliance. Compliance with Radiated EMI

specifications may require mounting in a suitable enclosure.

11 All models require a minimum mounting stand-off of 6.35 mm (0.25 inches) in

the end use product.

12 The ‘Y’ suffix indicates that these parts are non Pb-free (RoHS 5/6) compliant.

RoHS 6/6 (Pb-free) compliant versions are also available by replacing the suffix

‘Y’ with the suffix ‘J’ e.g. NLP150L-96Q5366J.

13 NOTICE: Some models do not support all options. Please contact your local

Artesyn representative or use the on-line model number search tool at

http://www.artesyn.com/powergroup/products.htm to find a suitable

alternative.

DERATING CURVE

Output Power (Watts)

0°C 10°C 20°C 30°C 40°C 50°C 60°C 70°C

55W

110W

150W 300 LFM FORCED

AIR COOLING

75W

NATURAL

CONVECTION

COOLING

OUTPUT OUTPUT CURRENT RIPPLE (4) TOTAL MODEL

VOLTAGE MIN (5) MAX (1) 300 LFM (2) REGULATION NUMBERS (12,13)

5.1 V (VA) 1.5 A 20 A 30 A 50 mV ±2.0% NLP150L-96Q5366Y

+3.3 V (VB) 0.5 A 10 A 15 A 50 mV ±2.0%

+12 V (VC) 0 A 2 A 3 A 120 mV ±5.0%

12 V, iso (VD) 0 A 0.65 A 1 A 120 mV ±5.0%

Rev.02.20.07

NLP150L Series

4 of 5

Embedded Power for

Business-Critical Continuity

Mechanical Notes

AAll dimensions are in inches (mm).

7.800 (198.12)

J3 1

JCS

JRM3

JRM5

F1 T1 (REF.)

0.225 (5.72)

3.800 (96.52)

3.350 (85.09)

0.220 (5.59)

ALL DIMENSIONS IN INCHES (MM)

MAXIMUM COMPONENT HEIGHT 1.26 (32.00)

7.350 (186.69)

3.755 (95.38)

2.385 (60.58)

0.000 (0.00)

0.000 (0.00) Ø0.156 (Ø3.96)

(5 PLS)

Recommended direction for

forced air relative to power

supply orientation shown

below.

1 Best.

2 Good.

3 Not recommended.

4 Not recommended.

JCS PIN CONNECTIONS

Pin 1 Load A Current Sharing

Pin 2 Load B Current Sharing

CONNECTOR AND MATING CONNECTOR TYPES

CONNECTOR TYPE MATING CONNECTOR TYPE

J1 Molex 26-60-4030 or equivalent Molex 09-50-3031 or equivalent with Molex 08-50-0105 or equivalent crimp

terminals

J2 Male 0.250 quick disconnect Molex 22-01-AA-5261, AA22-01 or equivalent

J3 Molex 26-60-4040 or equivalent Molex 09-50-3041 or equivalent with Molex 2478 phosphor bronze

or equivalent crimp terminals

J5 Beau Interconnect 70505-C-50 or 70 5 05-C50

equivalent

J6 Molex 22-23-3021 or equivalent Molex 22-01-2021 and contact 08-50-0113 terminals or equivalent

JRM3, JRM5 Leoco 2421P02H000 or equivalent Leoco 2420S02000 and contact 2453TPB00V1

& JCS

J5 PIN CONNECTIONS

Pin 1 VAPositive

Pin 2 VAPositive

Pin 3 Main RTN

Pin 4 Main RTN

Pin 5 VBPositive

J1 PIN CONNECTIONS

Pin 1 Neutral

Pin 2 Void

Pin 3 Line

JRM3 PIN CONNECTIONS

Pin 1 VBSense +

Pin 2 VBSense -

JRM5 PIN CONNECTIONS

Pin 1 VASense +

Pin 2 VASense -

J6 PIN CONNECTIONS

Pin 1 Signal

Pin 2 RTN

Note:VD is a floating output.

It can be configured as positibe or negative

J3 PIN CONNECTIONS

Pin 1 VDPositive

Pin 2 VDRTN

Pin 3 VCPositive

Pin 4 VCRTN

Embedded Power for

Business-Critical Continuity

Rev.02.20.07

NLP150L Series

5 of 5

Emerson Network Power and the Emerson

Network Power logo are trademarks and

service marks of Emerson Electric Co.

Emerson Network Power.

The global leader in enabling

business-critical continuity.

EmersonNetworkPower. com

AC Power

Connectivity

DC Power

Embedded Power

Inbound Power

Integrated Cabinet Solutions

Outside Plant

Precision Cooling

Site Monitoring and Services

Americas

5810 Van Allen Way

Carlsbad, CA 92008

USA

Telephone: +1 760 930 4600

Facsimile: +1 760 930 0698

Europe (UK)

Waterfront Business Park

Merry Hill, Dudley

West Midlands, DY5 1LX

United Kingdom

Telephone: +44 (0) 1384 842 211

Facsimile: +44 (0) 1384 843 355

Asia (HK)

16th - 17th Floors, Lu Plaza

2 Wing Yip Street, Kwun Tong

Kowloon, Hong Kong

Telephone: +852 2176 3333

Facsimile: +852 2176 3888

For global contact, visit:

www.powerconversion.com

technicalsupport@powerconversion.com

While every precaution has been taken to ensure

accuracy and completeness in this literature, Emerson

Network Power assumes no responsibility, and disclaims

all liability for damages resulting from use of this

information or for any errors or omissions.