J403.K (08/12)1pulseelectronics.com
PulseJack™
1x1 Tab-DOWN RJ45
RoHS peak wave solder temperature rating 260°C
Suitable for CAT 5 & 6 Fast Ethernet Cable or better UTP
Meets or exceeds IEEE 802.3 standard for 100Base-TX
350 µH minimum OCL with 8mA bias current
Minimum 1500Vrms isolation per IEEE 802.3 requirement
USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 62787060 China 86 755 33966678 Taiwan 886 3 4356768
Features and Benefits:
Electrical Performance Summary:
Mating Force Unmating Force Plug to Jack
Part Number (MAX) (MAX) Durability Retention (MIN)
J0 Series 5 lbs./2.268 kgs. 5 lbs./2.268 kgs. 750 Insertions 20 lbs./9.072 kgs.
RJ45 Durability Testing Rating
Part Shield Contact
Housing MSL 3
Number Material Finish Material Plating Area Solder Area 2 Material Specification Rating
J0
10-20m inches Nickel over Phosphor Nickel underplating and 120µ inches SN100
Series Brass 10-20m inches Brass Bronze selective gold plating 15µ inches over 50µ inches nickel Thermoplastic UL 94 V-0 1
RJ45 Material Specification
Electrical Specifications @ 25°C — Operating Temperature 0°C to +70°C
Insertion Return Loss
Common Mode
RoHS Compliant
Turns
Mech.
EMI
LEDs1
Loss (dB TYP) Crosstalk Rejection Hipot
Part Number
Ratios
Drawing
Fingers
(L/R)
(dB TYP) 100W ±15W (dB TYP) (dB TYP) (VDC)
TX RX 1-65 1-10 10-30 30-60 60-80 1-30 30-60 60-100 1-50 50-150
MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz
1 MIN
J0006D01BNL 1CT:1 1CT:1 A No G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250
J0006D21NL 1CT:1 1CT:1 D YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250
J0006D21BNL 1CT:1 1CT:1 B YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250
J0011D01NL 1CT:1 1CT:1 C No N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250
J0011D01BNL 1CT:1 1CT:1 A No G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250
J0011D21NL 1CT:1 1CT:1 D YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250
J0011D21BNL 1CT:1 1CT:1 B YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250
J0011D21ENL 1CT:1 1CT:1 B YES G/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250
J0012D21NL 1CT:1 1CT:1 D YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250
J0018D21NL 1CT:1.414 1CT:1 D YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250
J0018D21ENL 1CT:1.414 1CT:1 B YES G/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250
J0026D01NL 1CT:1 1CT:1 C No N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250
J0026D01BNL 1CT:1 1CT:1 A No G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250
J0026D01ENL 1CT:1 1CT:1 A No G/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250
J0026D21NL 1CT:1 1CT:1 D YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250
J0026D21BNL 1CT:1 1CT:1 B YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250
J0026D21ENL 1CT:1 1CT:1 B YES G/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250
J0026D21FNL 1CT:1 1CT:1 B YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250
J0026D21GNL 1CT:1 1CT:1 B YES YG/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250
J00-0014NL 1CT:1 1CT:1 C No N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250
J00-0045NL 1CT:1 1CT:1 A No G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250
J00-0061NL 1CT:1 1CT:1 F YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250
J00-0065NL 1CT:1 1CT:1 E YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250
Notes: 1. Connector dimensions comply with FCC dimension requirements. 3. MSL = Moisture Sensitivity Level rating from 1 to 5 (highest = 1, lowest = 5)
2. RoHS parts are tin matte finish over nickel.
Notes: 1. LEDs Left/right: G=green, Y=yellow, N/A=none, YG=Bi-color LED Yellow Green. 2. LEDs with internal resistor. 3. Bi-color Left LED.
Description:
100 Base-TX (Fast Ethernet) RJ45 1x1 Tab-DOWN with LEDs 8-pin (J0 series) intergrated magnetics
connector (ICM), designed to support applications, such as SOHO (ADSL modems), LAN-on-Mother-
board (LOM), Hub and Switches.
J0006D21BNL shown
2
3
J403.K (08/12)2pulseelectronics.com
PulseJack™
1x1 Tab-DOWN RJ45
A
J0 Series Mechanicals
B
Dimensions: Inches
mm
Unless otherwise specified, all tolerances are ± .010
0,25
J403.K (08/12)3pulseelectronics.com
PulseJack™
1x1 Tab-DOWN RJ45
C
J0 Series Mechanicals (continued)
D
Dimensions: Inches
mm
Unless otherwise specified, all tolerances are ± .010
0,25
J403.K (08/12)4pulseelectronics.com
PulseJack™
1x1 Tab-DOWN RJ45
Dimensions: Inches
mm
Unless otherwise specified, all tolerances are ± .010
0,25
E
J0 Series Mechanicals (continued)
FRONT VIEW SIDE VIEW
View from PCB component side
F
J403.K (08/12)5pulseelectronics.com
PulseJack™
1x1 Tab-DOWN RJ45
J0011schem.eps subm. by Manijeh F Nov 7 2000
edits submitted 1/19/01 by Manijeh F.
again, edits submitted 2/19/01 by Manijeh F.
0.001F
1CT : 1
RECEIVE
8
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
TD+ 1
CT 4
TD- 2
RD+ 3
CT 5
RD- 6
NC 7
8
1CT : 1
TRANSMIT
CABLE SIDE
PCB SIDE TO PHY
CHS
GROUND
NOTE: Connect CHS GND to PCB ground.
75
75
75
75
J0011schem.eps subm. by Manijeh F Nov 7 2000
edits submitted 1/19/01 by Manijeh F.
again, edits submitted 2/19/01 by Manijeh F.
0.001F
1CT : 1
RECEIVE
8
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
TD+ 1
CT 2
TD- 3
RD+ 4
CT 5
RD- 6
NC 7
8
1CT : 1
TRANSMIT
CABLE SIDE
PCB SIDE TO PHY
CHS
GRND
NOTE: Connect CHS GND to PCB ground.
75
75
75
75
J0006 J0011/J00-0014NL/45NL/61NL/65NL J0012
J0018
J0 Series Electrical Schematics
J0026
J0011schem.eps subm. by Manijeh F Nov 7 2000
edits submitted 1/19/01 by Manijeh F.
again, edits submitted 2/19/01 by Manijeh F.
0.001F
1CT : 1
RECEIVE
8
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
TD+ 1
CT 4
TD- 2
RD+ 3
CT 5
RD- 6
NC 7
8
CABLE SIDE
PCB SIDE TO PHY
CHS
GROUND
NOTE: Connect CHS GND to PCB ground.
75
75
75
75
1CT : 2
TRANSMIT
CABLE SIDE
PCB SIDE TO PHY
CHS GROUND
NOTE: Connect CHS GND to PCB ground.
TD+ 1
CT 3
TD- 2
RD+ 7
CT 6
RD- 8
4
58
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
1CT : 1
TRANSMIT
1CT : 1
RECEIVE
0.001F
C1 75
75
75
75
6pulseelectronics.com
PulseJack™
1x1 Tab-DOWN RJ45
J403.K (08/12)
For More Information
Pulse Worldwide
Headquarters
12220 World Trade Drive
San Diego, CA
92128
U.S.A.
Tel: 858 674 8100
Pulse Europe
Einsteinstrasse 1
D-71083 Herren-
berg
Germany
Tel: 49 7032 7806
Pulse China Headquarters
B402, Shenzhen Academy of
Aerospace Technol-
ogy Bldg.
10th Kejinan Road
High-Tech Zone
Nanshan District
Shenzen, PR China
518057
Pulse North China
Room 2704/2705
Super Ocean Finance
Ctr.
2067 Yan An Road
West
Shanghai 200336
China
Pulse South Asia
135 Joo Seng Road
#03-02
PM Industrial Bldg.
Singapore 368363
Tel: 65 6287 8998
Fax: 65 6287 8998
Pulse North Asia
3F, No. 198
Zhongyuan Road
Zhongli City
Taoyuan County 320
Taiwan R. O. C.
Tel: 886 3 4356768
Fax: 886 3 4356823
(Pulse)
Performance warranty of products oered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be
trademarks or registered trademarks of their respective owners. © Copyright, 2012. Pulse Electronics, Inc. All rights reserved.
Yellow 585 nm 2.5 V 2.1 V
Green 565 nm 2.5 V 2.2
Standard LED Wavelength Forward* V(MAX) (TYP)
* Using an internal resistor within the LED increases the voltage rating of the
diode from 2.5 V to 5.0 V (assumes bias current = 20 mA).
LED Configuration
