REV. 6/3/05 DATE REV ECN APPD. BY 1/25/06 | MI 7455 M | * 545 [13.84] MAX }- L .000 (TOP OF PCB TO BOTTOM OF OPENING) :010 MAX. RADIUS(4) |_ .850 [21.59] MAX. iL fil LV * 608 [15.44] SUGGESTED PANEL OPENING | 148 [3.75] HIGHEST POINT OF BEAM 2 NOTES: es x | XY = 1. CONNECTOR MATERIALS: a = HOUSING: THERMOPLASTIC UL94 V-0 N =, H CONTACTS/SHIELD: COPPER ALLOY = 8 2 SHIELD PLATING: NICKEL OR TIN 2 S, 2, CONTACT PLATING: SELECTIVE GOLD IN CONTACT AREA Ww x > 6 9 SEE CHART FOR PART NUMBER | 1 | a ] " 2. FOR PRODUCT SPECIFICATIONS SEE PRO2201. } ith | | 3. TOLERANCES COMPLY WITH F.C.C. DIMENSION REQUIREMENTS. } [_ 4, THE SUGGESTED PANEL OPENING IS INTENDED TO GIVE a _ .083 [2.12] | USER THE ABILITY TO HAVE REASONABLE JACK /PANEL * 400 [10.16] HIGHEST POINT 040 [1.02] CLEARANCES, YET MAINTAIN GROUNDING CAPABILITY. OF BEAM = }+-.425 [10.79] THESE VARIABLES CAN BE ADJUSTED IN EITHER DIRECTION BUT MAY CARRY SOME CONSEQUENCES IN THE FORM OF LOWER MATING FORCES OR TIGHTER ASSEMBLY TOLERANCES. 050 [1.27] TYP 50 MICRO-INCHES [1.27um]| SS6466SAPG4BA50 TOL NON-ACCUM 025 [0.64] z POINT OF CONTACT 30 MICRO-INCHES [0.76um] SS6466SAPG4BA Os oS CONTACT PLATING 6.035 [0.89] (6) TOL NON-ACCUM 8 2 WITH PANEL NY MATING AREA PART NUMBER H= .080 THIRD ANGLE PROJECTION Bel Stewart Connector 11118 Susquehanna Trail South Glen Rock, PA 17327-9199 (717) 235-7512 Fax: (717) 235-7954 http: //www.stewartconnector.com ooo 9.062 [1.57] (2) ef ue 120 [3.05] | TITLE: 9 128 15.25] (0) | DO NOT SCALE DRAWING EMI-RF| ONE PIECE SHIELDED, ESD GROUNDED, 6 X 6 JACK 125 [3.18] DRAWING IS SUBJECT TO RoHS CHANGE WITHOUT NOTICE 400 [10.16] + 530 [13.46] 2002/9S/EC DIMENSIONS: INCHES [METRIC] | THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON [PRN BY: p, | DATE , /25/06 . UNLESS OTHERMSE SPECIFIED ARE CONFIDENTIAL AND THE PROPRIETARY PROPERTY OF P.C.B. RECOMMENDED HOLE LAYOUT TOLERANCES ARE +.005 [0.13] | BEL STEWART CONNECTOR AND SHALL NOT BE REPRODUCED, | APD BY: Pa 1-30-06 pan FROM COMPONENT SIDE ANGLES ARE + 1 COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN TOLERANCE +.003 [0.08] UNLESS OTHERWISE SPECIFIED SHEET NO. CONSENT OF BEL STEWART CONNECTOR. THE SUBJECT DWC NO. REV. 1 OF 1 MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. C16401 72 Al 2 | i AutoCAD