PHOTO IC Transmitter/Receiver photo IC for optical link L10663-01, S10664-01 3.3 V operation, for MOST automotive network L10663-01 and S10664-01 are transmitter and receiver photo ICs developed for MOST (Media Oriented System Transport) networks used in vehicles to communicate multimedia information. Lower operating voltages in recently manufactured electronic devices have spurred demand for low-voltage and low-current transmitter/receiver photo ICs. To meet this need, HAMAMATSU has been developing low voltage (3.135 V to 3.465 V) photo ICs that still maintain a wide operating temperature range (-40 C to +105 C) the same as the conventional types (L10063-01/S10064-01). The transmitter photo IC L10663 consists of a Red-LED and driver IC incorporated into a clear plastic package and can be set to an operating mode that reduces the optical output level by half. The receiver photo IC S10664 features a wide dynamic range. It also has a low power consumption "sleeping mode" and an optical wakeup mode triggered by input of light. Both the transmitter and receiver photo IC input or output digital signals through a TTL interface. Features Applications l Only for vehicle networks (MOST) L10663-01 l Wide operating temperature range: -40 to +105 C l DC to 50 Mbps data communications l TTL input l Optical output 50 % cut mode MOST compliant products Specifications of these products are subject to change without prior notice to keep up with changes in the MOST standard. S10664-01 l Low current: 2.4 mA Max. (operating mode) 15 A Max. (sleeping mode) l Wide operating temperature range: -40 to +105 C l 4 M to 50 Mbps data communications l TTL output l Sleeping mode with optical wakeup 1 A bsolute m axim um ratings * (Ta= -40 to +105 C ) Param eter Supply voltage O perating tem perature Storage tem perature Soldering Sym bol Vcc Topr Tstg Tsol L10663, S10664 -0.5 to +7.0 -40 to +105 -40 to +120 260 C , 5 s, 3 tim es, at least 2.5 m m away from lead root U nit V C C - L10663-01 Electrical and optical characteristics (Ta= -40 to +105 C, Vcc= 3.135 to 3.465 V *1) Parameter Symbol Condition Min. Typ. Max. Unit Current consumption Icc Vin= 2.0 V, Rcont=13.5 k 40 mA p Peak emission wavelength 630 650 670 nm Spectral half width (FWHM) 20 30 nm Fiber coupled optical output 1 Po1 Rcont=13.5 k *2, *3 -9.5 -2 dBm Fiber coupled optical output 2 Po2 Rcont=27 k *2, *3 -13 -4.5 dBm Extinction ratio re 10 dB Rise time at pulse drive tr 20 to 80 % *2 5.5 ns Fall time at pulse drive tf 80 to 20 % *2 5.5 ns Pulse width variation tpwv 50 % *2, *4 19.99 24.29 ns Pulse width distortion (average value) tapwd 50 % *2, *4 -1.39 +1.39 ns *1: A bypass capacitor (0.1 F) connected between Vcc and GND at a position within 3 mm from the lead, and a 10 F capacitor is also connected to the power supply line nearby. The center of the optical fiber is aligned with the center of the package lens. The distance between the fiber end and the lens top is 0.1 mm. An external resistor (Rcont) is connected between Cont and -Vcc. *2: Measured with input signals conforming to SP1 MOST specification of physical layer Rev 1.1 Addendum B. *3: Average value measured with a plastic fiber (1 mm, SI-POF, NA=0.5, 1 m) made by Mitsubishi Rayon. *4: Measured with BiPhase PRBS at 45.2 Mbps (NRZ signal conversion). 1 Transmitter/receiver photo IC for optical link L10663-01, S10664-01 S10664-01 Electrical and optical characteristics (Ta= -40 to +105 C, Vcc=3.135 to 3.465 V *5) Parameter Symbol Condition Min. Typ. Max. Unit Current consumption (operation mode) Icco *6 24 mA Current consumption (sleeping mode) Iccs Dark state 15 A Receiver level Popt3 Bi-phase signal -25 -2 dBm High level output voltage Voh Ioh= -150 m 2.5 Vcc+0.3 V Low level output voltage Vol Iol=1.0 mA 0 0.4 V Vout Rise time tr 9 10 to 90 % *6, *7 ns Fall time tf 7 6, 7, 8, 9 Pulse width variation tpwv * * * * 17.09 29.79 ns Pulse width distortion (average value) tapwd *6, *7, *8, *9 -2.69 +6.49 ns O peration to sleeping m ode transition receivable level Psl *6, *10 -39 -25.5 dBm S leeping m ode to operation transition receivable level Pop Mode High level voltage Vmh Imh= -20 A 2.5 V output Low level voltage Vml Iml=0.3 mA 0.5 V *5: A bypass capacitor (0.1 F) is connected between Vcc and GND at a position within 3 mm from the lead, and a 10 F capacitor is also connected to the power supply line nearby. The center of the optical fiber is aligned with the center of the package lens. The distance between the fiber end and the lens top is 0.1 mm. *6: Measured with input signals conforming to SP3 MOST specification of physical layer Rev 1.1 Addendum B. *7: Measured with RL=50 k, CL=15 pF (including parasitic capacitance such as probe, connector and evaluation circuit board pattern), and threshold voltage 1.5 V. *8: An optical input waveform is generated with a Hamamatsu standard transmitter. *9: Measured with BiPhase PRBS at 45.2 Mbps (NRZ signal conversion). *10: Average optical output is measured with a POF (NA=0.5). Note) If modulated light at 4 Mbps or less (including DC light and no light input) is input to S10664-01, the high and low levels cannot be discerned. Mode output waveform (S10664-01) INPUT SIGNAL DATA OPTICAL INPUT tso Output waveform example (S10664-01) NO INPUT SIGNAL tos MODE OUTPUT Vmh 1.5 V Voh GND Vml OUTPUT DATA OUTPUT VOLTAGE Vol trigger point KPICC0095EA 2 tpwv (min.) tpwv (max.) Vertical axis: 1 V/div., Horizontal axis: 5 ns/div. (Ta=25 C, Vcc=3.465 V, Pi= -26 dBm, RL=50 k, CL=15 pF, 45.2 Mbps) Transmitter/receiver photo IC for optical link L10663-01, S10664-01 Dimensional outlines (unit: mm) S10664-01 8.98 0.2 (INCLUDING BURR) (3 x) d = 0.8 0.05 2.94 a' 1.07 1.27 (4 x) 0.5 0.05 2.54 2.54 2.54 0.23 (2 x) 5 2.0 DEPTH 0.15 MAX. (4 x) 0.25 0.05 (SPECIFIED AT THE LEAD ROOT) 1.8 2.92 1.24 (SPECIFIED AT THE LEAD ROOT) (2 x) 10 2.45 a' 0.97 0.6 1.50 3.7 0.05 2.03 0.66 2.54 2.54 2.54 5.9 0.2 (INCLUDING BURR) 5.1 0.6 (4 x) 0.5 0.05 (18.0) 2.45 a a' 1.07 1.27 ACTIVE AREA 1.57 5.92 0.6 EMITTING POINT 5.1 2.03 (18.0) 2.94 5.9 0.2 (INCLUDING BURR) 5.92 0.2 3.7 0.05 (3 x) d = 0.8 0.05 2.72 7.2 0.2 (INCLUDING BURR) 2.85 8.98 0.2 (INCLUDING BURR) 7.2 0.2 (INCLUDING BURR) (2 x) 10 L10663-01 + 0.05 0.05 - 0.03 Tolerance unless otherwise noted: 0.1, 2 R0.3 MAX. Values in parentheses indicate reference value. Shaded area indicates burr. Lead material: Cu alloy with Ni/Pd/Au plating Pin No. L10663-01 S10664-01 VIN Vcc GND GND Vcc MODEOUT Cont Vout a-a' CROSS SECTION KPICA0077EA Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. Type numbers of products listed inthe specification sheets or supplied as samples may have a suffix "(X)" which means tentative specifications or a suffix "(Z)" which means developmental specifications. (c)2010 Hamamatsu Photonics K.K. HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, www.hamamatsu.com U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvagen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 Cat. No. KPIC1071E02 Mar. 2010 DN