ITRMS I TAVM VRRM PSKT94 /PSKH 94 High Voltage Thyristor Module High Voltage Thyristor/Diode Modules TO-240 AA 1 Preliminary Data Sheet VRSM VDSM VRRM VDRM V V 2100 2300 2000 2200 ITRMS ITAVM TVJ = TVJM TC = 85C; 180 sine ITSM TVJ = 45C; VR = 0 180 104 A A t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 1700 1800 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 1540 1640 A A TVJ = 45C VR = 0 t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 14450 13500 A 2s A 2s TVJ = TVJM VR = 0 t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 11850 11300 A2 s A2 s 150 A/s TVJ = TVJM repetitive, IT = 250 A f = 50 Hz, tP = 200 s VD = 2/3 VDRM IG = 0.45 A, non repetitive, IT = ITAVM diG/dt = 0.45 A/s TVJ = TVJM; VDR = 2/3 VDRM RGK = ; method 1 (linear voltage rise) PGM TVJ = TVJM IT = ITAVM 7 4 5 3 6 7 1 5 4 2 3 1 5 42 VISOL 50/60 Hz, RMS IISOL 1 mA t = 1 min t=1s Md Mounting torque (M5) Terminal connection torque (M5) Typical including screws PSKT PSKH Features 500 A/s 1000 V/s l International standard package, JEDEC TO-240 AA Direct Copper Bonded Al2O3 -ceramic base plate Planar passivated chips Isolation voltage 3600 V~ UL registered, E 148688 Gate-cathode twin pins for version 1 Applications tP = 30 s tP = 300 s TVJ TVJM Tstg Weight 6 Maximum Ratings (dv/dt)cr PGAV VRGM 3 PSKT 94/20io1 PSKH 94/20io1 PSKT 94/22io1 PSKH 94/22io1 Test Conditions (di/dt)cr 2 Type Symbol i2dt = 2x 180 A = 2x 104 A = 2000-2200 V 10 5 0.5 10 W W W V -40...125 125 -40...125 C C C 3000 3600 V~ V~ Advantages 2.5-4.0/22-35 Nm/lb.in. 2.5-4.0/22-35 Nm/lb.in. 90 g DC motor control Softstart AC motor controller Light, heat and temperature control Space and weight savings Simple mounting with two screws Improved temperature and power cycling capability Reduced protection circuits Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated. 2002 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 http://store.iiic.cc/ 10 1: IGT, TVJ = 125C Symbol Test Conditions IRRM, IDRM TVJ = TVJM; VR = VRRM VT IT VT0 rT For power-loss calculations only (TVJ = TVJM) VGT VD = 6 V; IGT VD = 6 V; VGD IGD TVJ = TVJM; VD = 2/3 VDRM TVJ = TVJM; VD = 2/3 VDRM 15 = 300 A; TVJ = 25C mA 1.74 V 0.85 3.2 V m TVJ = 25C TVJ = -40C TVJ = 25C TVJ = -40C 1.5 1.6 100 200 V V mA mA 0.25 10 V mA TVJ = 25C; VD = 6 V; tP = 30 s diG/dt = 0.45 A/s; IG = 0.45 A 200 IH TVJ = 25C; VD = 6 V; RGK = 150 mA tgd TVJ = 25C; VD = 1/2 VDRM diG/dt = 0.45 A/s; IG = 0.45 A 2 s tq TVJ = TVJM; VR = 100 V; VD = 2/3 VDRM; tP = 200 s dv/dt = 20 V/s; IT = 150 A; -di/dt = 10 A/s 185 s QS IRM TVJ = TVJM -di/dt = 6 A/s; IT = 50 A 170 45 C A RthJC per per per per 0.22 0.11 0.42 0.21 K/W K/W K/W K/W 12.7 9.6 50 mm mm m/s2 IL RthJK dS dA a 2: IGT, TVJ = 25C V Characteristic Values 3: IGT, TVJ = -40C VG 2 1 3 1 5 4 4: PGAV = 0.5 W 5: PGM = IGD, TVJ = 125C mA 0.1 100 101 5W 6: PGM = 10 W 102 mA 104 103 IG Fig. 1 Gate trigger characteristics 1000 typ. thyristor; DC current module thyristor; DC current module Creeping distance on surface Creepage distance in air Maximum allowable acceleration TVJ = 25C s tgd typ. 100 Limit 10 1 10 100 mA IG Fig. 2 Gate trigger delay time Dimensions in mm (1 mm = 0.0394") 6 RthJC for various conduction angles d: d DC 180 120 60 30 RthJC (K/W) d 0.22 0.23 0.25 0.27 0.28 DC 180 120 60 30 Constants for ZthJC calculation: i 1 2 3 RthJK for various conduction angles d: Rthi (K/W) ti (s) 0.0066 0.0678 0.1456 0.0019 0.0477 0.344 RthJK (K/W) 0.42 0.43 0.45 0.47 0.48 Constants for ZthJK calculation: i 1 2 3 4 Rthi (K/W) ti (s) 0.0066 0.0678 0.1456 0.2 0.0019 0.0477 0.344 1.32 2002 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 http://store.iiic.cc/ 1000