226
MEDER electronic
www.meder.com
Reed Sensors for
PCB Mounting
MK06 Series
MK06 sensors are magnetically operated Reed
proximity switches for direct PCB mounting. The
sensor should be mounted on a xed surface
with the actuating magnet on the moving surface.
Introduction or removal of the magnetic eld
determines the closing and opening of the Reed
Switch. (2.54 mm PCB pin spacing, available with
different distances)
APPLICATIONS
• Telecommunications
Telephone hook switch, keyboard applications
• Domestic appliances
Door switch for washing machines, dishwashers,
microwave ovens, baking ovens, refrigerators
• Limit switch for low-power signals
Garage door controls, lever hoists, conveyors
• Lifts / elevators
Position indicators
Part Number Example
MK06 - 4 - C
4 is the packaging size
C is the magnetic sensitivity
ORDER INFORMATION MAGNETIC SENSITIVITY
DESCRIPTION
FEATURES
Form A, B, C and E (Latching) available
High power switches available
Various case sizes available
Five operate sensitivities available
•
•
•
•
Part Number Example
MK06 - 10 - E
E selects the latching option
Sensitivity
Class
Pull In
AT Range
B 10 - 15
C, H 15 - 20
D, I 20 - 25
E, K 25 - 30
Series Packaging Size Magnetic
Sensitivity
MK06 - 10 X - X
Options
4 B, C, D, E
5 B, C
6 B, C, D, E
7 B, C, D, E
8 (Form A) B, C, D, E
8 (Form B) H, I, K
Series Contact
Form
MK06 - 10 X *
Options
B
E
* See footnote on following page.
227
MEDER electronic
www.meder.com
DIMENSIONS
All dimensions in mm [inch]
* MK6-10-E is a magnetic latching sensor which is opened or closed by a passing magnet and remains in that
state until a magnet of opposite polarity or direction passes by again. The E refers to a latching sensor and does
not represent the magnetic sensitivity.
MK6-10-B is a normally closed sensor. The B refers to a latching sensor and does not represent the magnetic
sensitivity.
MK06 Series
Reed Sensors for
PCB Mounting
228
MEDER electronic
www.meder.com
Reed Sensors for
PCB Mounting
MK06 Series
CONTACT DATA
All Data at 20° C
Switch Model →
Contact Form →
Packing Style →
Switch 66
Form A, B, C
6, 7, 8, 10
Switch 80
Form A
4
Contact Ratings Conditions Min. Typ. Max. Min. Typ. Max. Units
Switching Power Any DC combination of V & A not
to exceed their individual max.‘s 10 10 W
Switching Voltage DC or peak AC 200 170 V
Switching Current DC or peak AC 0.5 0.5 A
Carry Current DC or peak AC 1.25 0.5 A
Static Contact Resistance w/ 0.5 V & 10mA 150 200 mΩ
Dynamic Contact Resistance Measured w/ 0.5 V & 50mA ,
1.5 ms after closure 200 250 mΩ
Insulation Resistance across
Contacts 100 volts applied 1010 * 109Ω
Breakdown Voltage across
Contact Voltage applied for 60 sec. min. 225 * 210 VDC
Operate Time incl. Bounce Measured w/ 100 % overdrive 0.5 0.6 ms
Release Time Measured w/ no coil suppression 0.1 0.1 ms
Capacitance at 10 kHz cross contact 0.2 0.2 pF
Contact Operation **
Must Operate Condition Steady state eld 10 30 10 30 AT
Must Release Condition Steady state eld 4 27 4 27 AT
Environmental Data
Shock Resistance 1/2 sinus wave duration 11 ms 50 50 g
Vibration Resistance From 10 - 2000 Hz 20 20 g
Ambient Temperature 10°C/ minute max. allowable -20 85 -20 85 oC
Stock Temperature 10°C/ minute max. allowable -35 85 -35 85 oC
Soldering Temperature 5 sec. 260 260 oC
Please note: The indicated electrical data are maximum values and can vary downwards when using a more sensitive switch.
* Insulation resistance of 1012 and breakdown voltage of 480 VDC is available.
** These ranges refer to the uncut / unmodied Reed Switches described in our Reed Switch section. Consult factory if more
detail is required.
229
MEDER electronic
www.meder.com
CONTACT DATA
MK06 Series
All Data at 20° C
Switch Model →
Contact Form →
Packing Style →
Switch 87
Form A
5
Switch 90
Form C
8
Contact Ratings Conditions Min. Typ. Max. Min. Typ. Max. Units
Switching Power Any DC combination of V & A not
to exceed their individual max.‘s 10 20 W
Switching Voltage DC or peak AC 200 175 V
Switching Current DC or peak AC 0.5 0.5 A
Carry Current DC or peak AC 0.5 1.0 A
Static Contact Resistance w/ 0.5 V & 10mA 200 150 mΩ
Dynamic Contact Resistance Measured w/ 0.5 V & 50mA ,
1.5 ms after closure 200 250 mΩ
Insulation Resistance across
Contacts 100 volts applied 109109Ω
Breakdown Voltage across
Contact Voltage applied for 60 sec. min. 100 200 VDC
Operate Time incl. Bounce Measured w/ 100 % overdrive 0.6 0.7 ms
Release Time Measured w/ no coil suppression 0.1 1.5 ms
Capacitance at 10 kHz cross contact 0.2 1.0 pF
Contact Operation **
Must Operate Condition Steady state eld 10 30 15 40 AT
Must Release Condition Steady state eld 4 27 AT
Environmental Data
Shock Resistance 1/2 sinus wave duration 11 ms 50 50 g
Vibration Resistance From 10 - 2000 Hz 20 20 g
Ambient Temperature 10°C/ minute max. allowable -20 85 -20 85 oC
Stock Temperature 10°C/ minute max. allowable -35 85 -35 85 oC
Soldering Temperature 5 sec. 260 260 oC
Please note: The indicated electrical data are maximum values and can vary downwards when using a more sensitive switch.
* Insulation resistance of 1012 and breakdown voltage of 480 VDC is available.
** These ranges refer to the uncut / unmodied Reed Switches described in our Reed Switch section. Consult factory if more
detail is required.
Reed Sensors for
PCB Mounting