RTV Silicones >> White, One Part RTV Silicone Adhesive Sealant >> Thin section potting
Jump to Product Number
Accessories
Adhesives
Brushes
Cleaners / Degreasers
Contact Cleaners
Desoldering Braid
Dusters & Circuit Coolers
EMI / RFI Shielding
Epoxies
Flux and Flux Remover
Glass & Screen Cleaners
Isopropyl Alcohol
Lead Free Solder
Lubricants
Potting & Encapsulating
Protective Coatings
Pens
Prototyping Materials
RTV Silicones
Soldering/desoldering
Specialized Cleaners
Swabs
Thermal Management
Thermally Conductive
Adhesives
Wipes
RTV Silicones by
1-Part Adhesive Sealant RTV112
Technical Support
for RTV Silicones
1-800-255-8886
M.G. Chemicals Disclaimer
for RTV Silicones >
Locate Distributor >
Quick Links
MSDS
Specifications
Available Sizes
Related products:
RTV118 Translucent
Selection Guide
One Part Chart
Two Part Chart
General Purpose
Aerospace
Marine
High Performance Assembly
Electronics
Thermal Conductivity
High Temperature
Low Temperature
Primary Characteristics
White Flowable
Acetoxy cure
Food Applications
FDA 21 CFR 177.2600
Excellent for thin section potting, filling small
surface voids, self leveling protective
coatings. Will flow into small crevices and
hard to reach places. Not for use in delicate
electrical and electronic applications in which
corrosion of copper, brass, or other sensitive
metals is undesirable. Can be used in food
contact applications where FDA 21 CFR
177.2600 regulations apply. Reference
CDS4319 "Food Contact Applications",
"Silicone Rubber Compounds."
Available Sizes
Catalog Number Sizes Available Description
RTV112-85ML 85 mL Tube
RTV112-300ML 300 mL Cartridge
Specifications
Use Adhesive Sealant
Special Feature High Performance
Standards FDA 21CFR 177.2600
MIL-A-46106, group 1, type 2
UL File No. E-36952
NSN 8030-00-11-2763
Cross Reference RTV118
Uncured Properties
Consistency Flowable
Color White
Specific Gravity 1.05
Tack Free Time 20 min
Cure Through Time
( 77°F / 50% relative humidity / 1/8" thick) 24 hours
Cure Time
(77°F /50% relative humidity) 3 days
Useful Temp. Range -60°C to 205°C
(-75°F to 400°F)
Cured Properties - MECHANICAL
Hardness 25 (Shore A)
Tensile Strength 2.20 MPa (325 psi)
Elongation 325%
Peel Strength 3 kg/cm (15 lb/in)
Cured Properties - ELECTRICAL
Volume Resistivity 6 x 1014 ohm · cm
Dielectric Strength 16 kV/mm (400 V/mil)