Europe: +49 / 7731 8399 0 | Email: info@meder.com Item No.: USA: +1 / 508 295 0771 | Email: salesusa@meder.com Asia: +852 / 2955 1682 | Email: salesasia@meder.com 3205175013 Item: DIP05-1A75-13L Conditions Coil Data at 20 C Coil resistance Coil voltage Rated power Coil current Thermal resistance Inductance Pull-In voltage Drop-Out voltage = Contact rating Switching voltage (<31 AT) Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage (<20 AT) Operate time incl. bounce Release time Capacity Special Product Data Number of contacts Contact - form Dielectric Strength Coil/Contact Insulation resistance Coil/Contact Capacity Coil/Contact Case colour Housing material Connection pins Magnetic Shield Reach / RoHS conformity Approval Approval Typ Max Unit Min Typ Max Unit operating temperature + self heating Conditions Contact data 75 Min ! "# $%! %#! #& ' not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ( ) * +% Start Value , - #. * %. RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch / 0 ) ) 1 Conditions Min Typ Max Unit 1 A - NO according to IEC 255-5 40C, 95% R.H. @ 10 kHz 0 / 1 black mineral filled epoxy cu-alloy tinned no yes UL File No. NRNT2.E156887 UL File No. NRNT8.E156887 Modifications in the sense of technical progress are reserved Designed at: 22.04.09 Designed by: THAUKE Approval at: 24.06.09 Approval by: KOLBRICH Last Change at: 20.08.09 Last Change by: KSCHIELENSKI Approval at: 21.08.09 Approval by: KOLBRICH Version: 3 Europe: +49 / 7731 8399 0 | Email: info@meder.com Item No.: USA: +1 / 508 295 0771 | Email: salesusa@meder.com Asia: +852 / 2955 1682 | Email: salesasia@meder.com 3205175013 Item: DIP05-1A75-13L Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability Conditions Min Max 4 4 wave soldering max. 5 sec. 5 Unit 2 2 3 3 3 fully sealed Conditions General data Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Min Total weigth Packaging Typ Max , Tube per 25 piece Unit 2 Modifications in the sense of technical progress are reserved Designed at: 22.04.09 Designed by: THAUKE Approval at: 24.06.09 Approval by: KOLBRICH Last Change at: 20.08.09 Last Change by: KSCHIELENSKI Approval at: 21.08.09 Approval by: KOLBRICH Version: 3