FUJITSU MEDIA DEVICE DATA SHEET DS04-23122-5E ASSP Mobile Communication Systems Piezoelectric SAW BPF (700 MHz to 1700 MHz) F5CP/F6CP Series (D2 type) DESCRIPTION The F5CP/F6CP series of SAW band pass filters have 2.5 mm x 2.0 mm x 0.9 mm (h) of ultra small package, which are available in the 700 MHz to 1700 MHz frequency range. They exhibit high stability by using single crystal, Lithium Tantalate (LiTaO3) with a large electro-mechanical coefficient. Typical applications for the F5CP/F6CP series include RF interstage filtering in mobile communications systems. Standard devices are available for AMPS, GSM, EGSM, PDC800, PDC1.5G. FEATURES * Ultra compact and light package (2.5 mm x 2.0 mm x 0.9 mm (h) *) *: 1.0 mm height maximum * Excellent stop band attenuation * External matching are not required (50 I/O) * Standard devices are available for mobile communication standards PACKAGE F5CP/F6CP Series (D2 type) PIN ASSIGNMENT (BOTTOM VIEW) 1 2 4 3 PIN DESCRIPTION 2 Pin No. Symbol Descriptions 1 IN 2 GND Ground pin 3 OUT Output pin 4 GND Ground pin Input pin F5CP/F6CP Series (D2 type) ABSOLUTE MAXIMUM RATINGS Parameter Symbol Ambient operating temperature Storage temperature F5CP Series Input power Rating Max Ta -30 +85 C Tstg -40 +100 C +15 dBm +10 dBm -5 +5 V Pin F6CP Series Input DC voltage Unit Min WARNING: Piezoelectric devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. RECOMMENDED OPERATING CONDITIONS Parameter Value Symbol Operating temperature Ta Min Max -30 +85 Unit C WARNING: The recommended operating conditions are required in order to ensure the normal operation of the piezoelectric device. All of the device's electrical characteristics are warranted when the device is operated within these ranges. Always use piezoelectric devices within their recommended operating conditionranges. Operation outside these ranges may adversely affect reliability and could result in device failure. No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their FUJITSU representatives beforehand. STANDARD DEVICES Center Band width frequency (MHz) (MHz) System Part symbol Part number AMPS/CDMA/ TDMA TX 836.5 25 3 FAR-F5CP-836M50-D203 RX 881.5 25 4 FAR-F5CP-881M50-D204 PDC1.5G TX 1441.0 24 7 FAR-F6CP-1G4410-D207 R FAR-F6CP-1G4410-D20R Remarks 3 F5CP/F6CP Series (D2 type) ELECTRICAL CHARACTERISTICS AND TYPICAL FREQUENCY RESPONSE 1. SYSTEM : AMPS-Tx PART NUMBER : FAR-F5CP-836M50-D203 Parameter Value Conditions Min Typ Max Unit Insertion loss 824 MHz to 849 MHz 3.0 3.5 dB In-band ripple 824 MHz to 849 MHz 1.1 1.6 dB DC to 800 MHz 45 50 dB 869 MHz to 1049 MHz 29 35 dB 1049 MHz to 2000 MHz 45 50 dB 824 MHz to 849 MHz (8.5) 1.9 (10.2) 2.2 () (dB) Absolute attenuation In-band VSWR (Return loss) S21 log MAG 10 dB/ REF 0 dB 1 1 : -2.8742 dB 824 MHz S11 1U FS 1 : 38.709 0.1641 31.689 pH 824 MHz 2 : 70.559 -11.789 849 MHz 2 : -2.7828 dB 849 MHz 3 : -51.439 dB 800 MHz 4 : -34.045 dB 869 MHz 2 Remarks 3 : 2.6631 -30.007 800 MHz 4 : 13.117 -138.59 869 MHz 1 4 2 3 4 SPAN 300 MHz CENTER 835 MHz S11 SWR 1/ REF 1 4 3 1 : 1.2937 824 MHz 3 CENTER 835 MHz S22 1U FS SPAN 300 MHz 1 : 38.223 1.1992 231.63 pH 824 MHz 2 : 70.09 -9.5508 849 MHz 2 : 1.4867 849 MHz 3 : 25.566 800 MHz 4 : 33.367 869 MHz 3 : 2.4951 -30.189 800 MHz 4 : 13.344 -140.89 869 MHz 1 2 4 1 CENTER 835 MHz 4 2 SPAN 300 MHz 3 CENTER 835 MHz SPAN 300 MHz F5CP/F6CP Series (D2 type) 2. SYSTEM : AMPS-Rx PART NUMBER : FAR-F5CP-881M50-D204 Parameter Value Conditions Min Typ Max Unit Insertion loss 869 MHz to 894 MHz 2.9 3.5 dB In-band ripple 869 MHz to 894 MHz 1.0 1.6 dB DC to 779 MHz 45 50 dB 779 MHz to 849 MHz 40 47 dB 914 MHz to 970 MHz 28 33 dB 970 MHz to 1049 MHz 50 60 dB 1049 MHz to 2000 MHz 40 50 dB 869 MHz to 894 MHz (8.5) 1.9 (10.2) 2.2 () (dB) Absolute attenuation In-band VSWR (Return loss) S21 log MAG 10 dB/ REF 0 dB 1 1 : -2.8617 dB 869 MHz S11 1U FS 1 : 52.887 -4.0195 45.564 pF 869 MHz 2 : 80.242 -14.598 894 MHz 2 : -3.0293 dB 894 MHz 3 : -56.249 dB 849 MHz 4 : -33.517 dB 914 MHz 2 Remarks 3 : 2.4668 -22.392 849 MHz 4 : 12.961 -142.84 914 MHz 1 4 2 3 4 3 SPAN 300 MHz CENTER 880 MHz S11 SWR 1/ REF 1 3 4 1 : 1.1015 869 MHz CENTER 880 MHz S22 1U FS SPAN 300 MHz 1 : 54.602 1.627 297.97 pH 869 MHz 2 : 80.621 -8.7813 894 MHz 2 : 1.6896 894 MHz 3 : 24.367 849 MHz 4 : 35.586 914 MHz 3 : 2.5654 -22.138 849 MHz 4 : 15.594 -156.26 914 MHz 1 2 4 3 1 CENTER 880 MHz 2 SPAN 300 MHz CENTER 880 MHz SPAN 300 MHz 5 F5CP/F6CP Series (D2 type) 3. SYSTEM : PDC1.5G-Tx PART NUMBER : FAR-F6CP-1G4410-D207 Parameter Value Conditions Min Typ Max Unit Insertion loss 1429 MHz to 1453 MHz 3.5 3.8 dB In-band ripple 1429 MHz to 1453 MHz 1.3 1.6 dB DC to 1380 MHz 40 45 dB 1477 MHz to 1501 MHz 25 28 dB 1501 MHz to 1607 MHz 28 30 dB 1607 MHz to 1900 MHz 45 55 dB 1900 MHz to 3000 MHz 30 33 dB 1429 MHz to 1453 MHz (7.0) 2.4 (7.7) 2.6 () (dB) Absolute attenuation In-band VSWR (Return loss) S21 log MAG 10 dB/ REF 0 dB 1 2 4 1 : -2.6466 dB 1.429 GHz S11 1 : 39.924 1U FS Remarks 0.0859 9.5712 pH 1.429 GHz 2 : 66.582 -14.813 1.453 GHz 2 : -2.8931 dB 1.453 GHz 3 : -48.237 dB 1.38 GHz 4 : -30.021 dB 1.477 GHz 5 : -61.614 dB 1.607 GHz 3 : 3.9805 -24.466 1.38 GHz 4 : 15.57 -133.34 1.477 GHz 1 5 : 7.3418 -55.936 1.607 GHz 2 3 5 4 3 SPAN 400 MHz CENTER 1 450 MHz S11 SWR 1/ REF 1 3 4 5 CENTER 1 450 MHz S22 SPAN 400 MHz 1 : 39.836 1U FS 5 1 : 1.2523 1.429 GHz 2 : 1.4666 1.453 GHz 3 : 15.581 1.38 GHz 4 : 26.309 1.477 GHz 5 : 15.408 1.607 GHz 0.4395 48.944 pH 1.429 GHz 2 : 67.617 -12.059 1.453 GHz 3 : 4.1484 -25.398 1.38 GHz 4 : 23.188 -166.48 1.477 GHz 1 5 : 8.541 -61.674 1.607 GHz 2 4 1 CENTER 1 450 MHz 6 3 2 5 SPAN 400 MHz CENTER 1 450 MHz SPAN 400 MHz F5CP/F6CP Series (D2 type) 4. SYSTEM : PDC1.5G-Tx PART NUMBER : FAR-F6CP-1G4410-D20R Parameter Value Conditions Min Typ Max Unit Insertion loss 1429 MHz to 1453 MHz 2.5 3.0 dB In-band ripple 1429 MHz to 1453 MHz 0.8 1.4 dB DC to 1380 MHz 40 45 dB 1477 MHz to 1501 MHz 20 32 dB 1501 MHz to 1607 MHz 28 32 dB 1607 MHz to 1900 MHz 45 51 dB 1900 MHz to 3000 MHz 30 45 dB 1429 MHz to 1453 MHz (7.4) 1.7 (11.7) 2.5 () (dB) Absolute attenuation In-band VSWR (Return loss) S21 log MAG 10 dB/ REF 0 dB 2 3 4 5 1 1 : -49.815 dB 1.38 GHz S11 1 : 3.01006 1U FS -30.558 2 : -2.4229 dB 1.429 GHz 3 : -2.5064 dB 1.453 GHz 4 : -32.603 dB 1.477 GHz 5 : -33.819 dB 1.501 GHz Remarks 3.7742 pF 1.38 GHz CH1 Markers 2 : 39.143 -3.5684 1.429 GHz 3 : 60.367 -10.139 1.453 GHz 4 : 16.492 -154.35 1.477 GHz 2 5 : 14.699 -81.426 1.501 GHz 3 4 1 5 SPAN 400 MHz CENTER 1 450 MHz S11 SWR 1 1/ REF 1 4 5 CENTER 1 450 MHz S22 SPAN 400 MHz 1 : 3.1895 1U FS 1 : 22.149 1.38 GHz 2 : 1.2938 1.429 GHz 3 : 1.3010 1.453 GHz 4 : 32.211 1.477 GHz 5 : 12.634 1.501 GHz -31.245 3.6911 pF 1.38 GHz 2 : 39.359 -3.7520 1.429 GHz 3 : 62.402 -5.4785 1.453 GHz 4 : 17.336 -161.48 1.477 GHz 2 5 : 16.094 -84.156 1.501 GHz 3 4 1 5 CENTER 1 450 MHz 2 3 SPAN 400 MHz CENTER 1 450 MHz SPAN 400 MHz 7 F5CP/F6CP Series (D2 type) MEASUREMENT CIRCUIT Network Analyzer Network Analyzer 1 3 Filter 50 50 2, 4 1 to 4 : Pin numbers PART NUMBER DESIGNATION [Designation example] FAR-F5CP(1) (2) -D2 (3) (4) (5) (1) Frequency range (2) (3) (4) (5) 5 : 700 MHz to 1000 MHz 6 : 1000 MHz to 1700 MHz Package size P : 2.5 mm x 2.0 mm x 0.9 mm Frequency This specifies the nominal center frequency using six alphanumeric. M (for MHz) or G (for GHz) indicates the decimal point. [Example] 836.5 MHz 836M50 1.441 GHz 1G4410 Part symbol Numbers specified by Fujitsu Refer to STANDARD DEVICES Packing (Reeled tape) K : 1000 pcs / reel J : 5000 pcs / reel MARKING Production date (EIAJ) Part symbol INDEX 8 Lot Code F5CP/F6CP Series (D2 type) 0.63 0.10 PACKAGE DIMENSION 0.88 0.10 0.9 0.10 2.5 0.10 0.5 Min 4 2.0 0.10 3 (C 030) INDEX 2 1 4 - R0.18 0.5 Min Dimensions in mm. 0.5 0.88 0.5 0.88 RECOMMENDED FOOT PATTERN ON PCB 0.8 1.2 1.2 0.5 Dimensions in mm. 9 F5CP/F6CP Series (D2 type) PACKING (1) Reel dimensions 1.5 Min 20.2 Min 250.0 80.0 12.8 Min R0.58 9.5 0.5 13.8 Max Type Volume K 1000 pcs J 5000 pcs Dimensions in mm. (2) Packing style Pulling side Reel side Pulling side 10 #1 PIN F5CP/F6CP Series (D2 type) 4.0 0.1 2.8 0.1 3.5 0.05 2.0 0.05 1.0 Min 0.3 0.05 8.0 0.2 +0.1 1.5 -0.0 1.75 0.1 (3) Tape dimensions +0.1 4.0 0.1 1.0 -0.0 2.3 0.1 Dimensions in mm. (4) Peel strength of top cover tape Peel off by the force of 0.1 N to 1.0 N under the condition at the right . (Conforms to EIA) Direction of pulling Speed 300 mm/min 165 to 180 Embossment carrier type tape 11 F5CP/F6CP Series (D2 type) RECOMMENDED REFLOW PROFILE 240 10 s Temperature (C) Heating rate 1C/s to 4 C/s 210 Air cooling 60 s Pre-Heating 150 60 s 90 s Time (s) NOTE Mass-produced product order is accepted by a unit of 1000. 12 F5CP/F6CP Series (D2 type) FUJITSU MEDIA DEVICES LIMITED All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU MEDIA DEVICES sales representatives before ordering. The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU MEDIA DEVICES electronic device; FUJITSU MEDIA DEVICES does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. FUJITSU MEDIA DEVICES assumes no liability for any damages whatsoever arising out of the use of the information. Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU MEDIA DEVICES or any third party or does FUJITSU MEDIA DEVICES warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU MEDIA DEVICES assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. The products described in this document are designed, and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite). Please note that FUJITSU MEDIA DEVICES will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any electronic devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan. F0308 FUJITSU LIMITED Printed in Japan