Timer/Counter/Analyzers
Tektronix FCA3000 and FCA3100 Series Data Sheet
Features & Benefits
Key Performance Specifications
300 MHz, 3 GHz, 20 GHz Models
Up to 3 Input Channels
50 ps (FCA3100 Series) or 100 ps (FCA3000 Series) Single-shot Time
Resolution
12 Digit/s Frequency Resolution
0.001° Phase Resolution
3 mV or better Voltage Resolution
Optional 5×10–8 High-stability Oven Time Base
Measurement Throughput
250k Sample/s Data Transfer Rate to Internal Memory
(Up to 3.75M samples stored)
Up to 15k Sample/s Data Transfer Rate over USB/GPIB Bus
(Block mode)
Up to 650 Individually Triggered Measurements/s
Available Functions and Features
Automated Measurements: Frequency, Period, Ratio, Time Interval,
Time Interval Error, Pulse Width, Rise/Fall Time, Phase Angle, Duty
Cycle, Maximum Voltage, Minimum Voltage, Peak-to-Peak Voltage
Totalize Measurement (FCA3100 Series)
Multi-parameter Display
Trend Plot Mode
Measurement Statistics Mode
Histogram Mode
Allan Deviation
Zero Dead-time Frequency/Period Measurements
Continuous Data Streaming over USB/GPIB Bus during Measurement
(FCA3100 Series)
Programmable Pulse Output from 0.5 Hz to 50 MHz
Connectivity
Optional Rear-panel Inputs
USB Device and GPIB Ports on Rear Panel for Quick PC Connectivity
GPIB Interface Supports Full SCPI-compatible Programmability and
offers an Emulation Mode for Plug-and-Play Replacement in Existing
ATE Systems
External Arming Input
10 MHz Reference Oscillator Output
Includes National Instrument’s LabVIEW SignalExpress™ TE Limited
Edition Software for Connecting Your Bench
Optional TimeView™ Software Available for Modulation Domain Analysis
3-year Warranty
Data Sheet
Feature-rich Tools for Precision
Measurements
The FCA3000 and FCA3100 Timer/Counter/Analyzer Series pack many
different functions into one feature-rich instrument. With industry-leading
frequency and time resolution, the FCA Series comes standard with
deep internal memory and a fast data transfer rate of 250k Samples/s to
internal memory. In addition, the multi-parameter display shows auxiliary
measurements alongside your main measurement to provide you with the
results you need at a glance. With the industry’s most comprehensive
analysis modes, including measurement statistics, histograms, and trend
plots, you have the tools you need to quickly and accurately analyze your
signal.
Industry-leading Performance for Demanding
Designs
High-resolution is critical for R&D and production testing on today’s
demanding designs. The FCA Series delivers 12-digit/s frequency
resolution and for time measurements, single-shot resolution of 50 ps
(FCA3100 Series) or 100 ps (FCA3000 Series) is available with
measurement values displayed up to 14 digits. With industry-leading
performance, the FCA Series provides you with fast, precise
measurements.
Unique Features for Accurate Measurements
To ensure correct measurements of Allan Deviation, the FCA3100 Series
offers a zero dead-time measurement technique and continuous time
stamping of trigger events. This feature is vital for mechanical and medical
measurements where every single cycle must be measured. The FCA3000
Series offers this functionality through the USB/GPIB interfaces with a raw
time-stamping function.
For correct calculation of statistical parameters, the FCA Series comes
standard with limit qualifying capability. By setting limits, you can isolate
one cluster in your calculation. This is important for applications such as
verifying the jitter of digital pulses that appear in discrete clusters in CD
players or in HDB3-coded data.
Also available is hysteresis compensation for time interval measurements.
By adding hysteresis, you can reduce trigger-level error from the typical
15-20 mV found in most counters on the market today, down to a typical
2.5 mV. This means 6-8 times improved trigger precision in critical time
interval measurements.
Fast Throughput Reduces Test Time
The FCA Timer/Counter/Analyzer Series offers industry-best throughput,
saving you up to 90% on your testing time compared to other timer/counters
on the market. Up to 250,000 measurement results per second can be
Multi-parameter Display.
Phase Relationship Measurement.
stored in the internal memory. Alternatively, you can transfer up to 15,000
measurement results per second in Block mode through the GPIB or
USB interface. For added flexibility, the FCA3100 Series offers a zero
dead-time counter feature to continuously stream measurement data over
the GPIB/USB bus during, not after, measurement. This creates a dynamic
measurement and analysis system.
Analyze Your Device with the Industry’s Only
Graphical Display
With the unique display of the FCA Series, you can measure multiple
parameters of the same signal from one test connection. To reveal signal
quality issues like drift, intermittent transients, and stability, you can view the
data as a real-time trend plot or a histogram with the FCA Series graphical
display mode, or you can use measurement statistics to track how signal
parameters are changing over time. A single-button Analyze mode gives
you fast insight into the behavior of your device right on the timer/counter’s
display.
Multi-parameter Display
With the multi-parameter display, you can read important auxiliary
measurement values (such as Vmax,V
min,V
p-p, and more) displayed with your
main frequency, time, period, or phase measurements. With one glance,
you can see the information you need to quickly assess your device’s
performance.
With up to 3 input channels, you can measure the relationship between
different signals. For example, you can measure the phase relationship
between the input and output signals of your device. You can read other
critical parameters simultaneously, such as the test frequency of the signal
and the voltage ratio (in dB), in one glance with the multi-parameter display.
2www.tektronix.com
Timer/Counter/Analyzers — Tektronix FCA3000 and FCA3100 Series
Trend Plot Analysis.
Measurement Statistics.
Histogram Plot.
Measurement Trend Plots
Depending on your test case, your signal parameters may change from
instant to instant. With the Trend Plot Analysis mode, you can graphically
plot the trend of a measured value over time.
Measurement Statistics
With integrated statistics processing, you can calculate the average,
standard, and Allan deviation of a measurement, as well as track the
minimum and maximum measured values, all with the push of a button.
Histogram Plots
To graphically see the average and standard deviation of a set of
measurements, you can use the histogram function to see the distribution of
measurement results.
Optional Modulation Domain Analysis
With the optional Tektronix TimeView™ software (TVA3000), the
FCA Timer/Counter/Analyzer Series can become a high-performance
modulation domain analyzer. With high measurement speeds (up to
Tektronix TimeView™ Software.
250k measurement/s) and large memory depth (up to 3.75M points), fast
frequency changes can be captured in real time and then analyzed with
TimeView. This comprehensive software tool allows for remote instrument
control, and the analysis and display of measurement results in a choice
of graphs. For example, results can be displayed as raw data, statistical
histogram, waveform graph (as if you were using an oscilloscope), or as
an FFT spectrum graph. TimeView further allows analysis of modulation
parameters like modulation depth or frequency modulation index.
Designed to Make Your Work Easier
The FCA Timer/Counter/Analyzer Series are designed with the ease of use
and familiar operation you have come to expect from Tektronix.
Intuitive Operation
Menu-oriented settings reduce the risk of mistakes. With dedicated and
menu-driven front-panel buttons, you will have fast access to frequently
used functions and parameters, reducing setup time. For example, a
single-touch Analyze key toggles you between Statistics, Trend Plot, and
Histogram modes.
Autoset Function
Similar to Tektronix oscilloscopes, the front-panel Autoset button will
automatically set optimum trigger levels and hysteresis adapted to the
actual signal applied.
Easy PC Connectivity
Connect to your PC with the rear-panel GPIB or USB device ports. The
GPIB interface operates in SCPI/GPIB for plug-and-play replacement in
existing ATE systems or easy integration into larger test systems. If desired,
an emulation mode for existing counter/timers is available.
www.tektronix.com 3
Data Sheet
Connect Your Bench for Intelligent Debug
Easily capture, save, and analyze measurement results from your FCA
Series timer/counter/analyzer with the special Tektronix Edition of National
Instruments LabVIEW SignalExpress™ software. Every FCA Series
timer/counter/analyzer ships with a free copy of the Limited Edition version
of SignalExpress for basic instrument control, data logging, and analysis.
The optional Professional Edition offers over 200 built-in functions that
provide additional signal processing, advanced analysis, sweeping, limit
testing, and user-defined step capabilities.
SignalExpress supports the range of Tektronix bench instruments*1
enabling you to connect your entire test bench. You can then access the
feature-rich tools packed into each instrument from one intuitive software
interface. This allows you to automate complex measurements requiring
multiple instruments, log data for an extended period of time, time-correlate
data from multiple instruments, and easily capture and analyze your results,
all from your PC. Only Tektronix offers a connected test bench of intelligent
instruments to simplify and speed debug of your complex design.
Performance You Can Count On
In addition to industry-leading service and support, every FCA Series
timer/counter/analyzer comes backed with a three-year standard warranty.
Select the Performance/Features to Meet Your
Needs
Feature FCA3100 Series FCA3000 Series
Frequency Resolution 12 digit/s 12 digit/s
Time Resolution 50 ps 100 ps
Voltage Resolution 1 mV 3 mV
Meas. Speed to Internal
Memory
250k measurement/s
3.5M results
250k measurement/s
750k results
Talker-only Output
(GPIB/USB)
4k measurement/s No
Individually Triggered
Measurements
650/s 500/s
Block Transfer Speed 15k measurement/s 5k measurement/s
Frequency/Period, Time,
Phase, Volt, Duty Cycle,
Pulse, Rise Time
Yes Yes
Graphic Display of Trend,
Histogram, Modulation
Domain
Yes Yes
Totalize, TIE Yes No
Programmable Pulse
Output
Yes No
Continuous
Measurements
Yes No
*1For a complete listing of Tektronix instruments supported by NI LabVIEW Signal Express, visit
www.tektronix.com/signalexpress.
Characteristics
Measuring Functions
All measurements are displayed with a large main parameter value and smaller
auxiliary parameter values (with less resolution). Some measurements are only
available as auxiliary parameters.
Frequency A, B,C
Characteristic Description
Mode Normal, Back-to-Back (FCA3100 Series)
Range
Input A, B 0.001 Hz to 300 MHz
InputC 3or20GHz
Resolution 12 digits in 1 s measuring time (normal)
11 digits in 1 s measuring time (back-to-back)
Aux Parameters Vmax,V
min,V
p-p
Frequency Burst A, B, C
(FCA3020 and FCA3120 – 20 GHz Only)
Frequency and PRF of repetitive burst signals can be measured without an external
control signal and with selectable-start arming delay.
Characteristic Description
Functions Frequency in burst (in Hz) PRF (in Hz)
Range Input A, B, C: See Frequency spec.
Minimum Burst Duration Down to 40 ns
Minimum Pulses in Burst
InputA,B 3 (6 above 160 MHz)
Input C 3 × prescaler factor
PRF Range 0.5 Hz to 1 MHz
Start Delay 10 ns to 2 s, 10 ns resolution
Aux Parameters PRF
Period A, B, C
Characteristic Description
Mode Single, Average, Back-to-Back (FCA3100 Series)
Range
InputA,B 3.3 ns to 1000 s (single, average)
4.0 µs to 1000 s (back-to-back)
Input C 10 ns down to 50 ps
Resolution 100 ps (single); 12 digit/s avg. (FCA3000 Series)
50 ps (single); 12 digit/s avg. (FCA3100 Series)
Aux Parameters Vmax,V
min,V
p-p
Ratio A/B, B/A, C/A, C/B
Characteristic Description
Range (10–9)to10
11
Input Frequency
InputA,B 0.1Hzto300MHz
InputC 3or20GHz
Aux Parameters Freq 1, Freq 2
TimeIntervalAtoB,BtoA,AtoA,BtoB
Characteristic Description
Range Normal calculation: 0 ns to +106s
Smart calculation: –106sto+10
6s
Resolution 100 ps single (FCA3000 Series)
50 ps single (FCA3100 Series)
Min Pulse Width 1.6 ns
Smart Calculation Smart Time Interval to determine sign (A before B or A
after B)
4www.tektronix.com
Timer/Counter/Analyzers — Tektronix FCA3000 and FCA3100 Series
Positive and Negative Pulse Width A, B
Characteristic Description
Range 2.3 ns to 106s
Min Pulse Width 2.3 ns
Aux Parameters Vmax,V
min,V
p-p
Rise and Fall Time A, B
Characteristic Description
Range 1.5 ns to 106s
Trigger Levels 10% and 90% of signal amplitude
Min Pulse Width 1.6 ns
Aux Parameters Slew rate, Vmax,V
min
Time Interval Error (TIE) A, B
Normalized period back-to-back measurements, calculated as TIE(k) = k *
TREF -∑TI,whenT
I= Individual Period Back-to-Back and TREF = Reference
Period Value.
Positive and Negative Duty Factor A, B
Characteristic Description
Range 0.000001 to 0.999999
Frequency Range 0.1 Hz to 300 MHz
Aux Parameters Period, pulse width
Phase A Relative B, B Relative A
Characteristic Description
Range –180° to +360°
Resolution Single cycle: 0.001° to 10 kHz, decreasing to 1°
>10 MHz. Resolution can be improved by averaging
(statistics)
Frequency Range Up to 160 MHz
Aux Parameters Freq (A), Va/Vb (in dB)
Totalize A, B (FCA3100 Series)
Characteristic Description
Mode TotA,TotB,TotA+B,TotA–B,TotA/B
Range 1 to 1010 counts
Frequency Range Up to 160 MHz
Start Control Manual, start arming
Stop Control Manual, stop arming, timed
Aux Parameters Other Totalize functions
Vmax,V
min,V
p-p A, B
Characteristic Description
Range –50 V to +50 V, –5 V to +5 V
Range is limited by the specification for max input
voltage without damage (see input A, B)
Frequency Range DC,1Hzto300MHz
Mode Vmax,V
min,V
p-p
Resolution 3mV(FCA3000Series)
1mV(FCA3100Series)
Uncertainty (5 V range, typical)
DC,1Hzto1kHz 1%+15mV
1kHzto20MHz 3% + 15 mV
20 to 100 MHz 10% + 15 mV
100to300MHz 30% + 15 mV
Aux Parameters Vmin,V
max,V
p-p
Time Stamping A, B, C
Raw time-stamp data together with pulse counts on inputs A, B, or C, accessible
through GPIB or USB only.
Characteristic Description
Max Sample Speed See GPIB specifications
Max Frequency 160 MHz
Time-stamp Resolution 100 ps (FCA3000 Series)
50 ps (FCA3100 Series)
Input and Output Specifications
Inputs A and B
Characteristic Description
Frequency Range DC Coupled: DC to 300 MHz
AC Coupled: 10 Hz to 300 MHz
Impedance 1MΩ/20pFor50Ω(VSWR ≤2:1)
Trigger Slope Positive or negative
Max Channel Timing
Difference
500 ps
Sensitivity 15 mVRMS (DC-200 MHz)
25 mVRMS (200-300 MHz)
Attenuation X1, X10
Dynamic Range (X1) 30 mVp-p to 10 Vp-p within ±5 V window
Trigger Level Readout on display
Resolution FCA3000 Series: 3 mV
FCA3100 Series: 1 mV
Uncertainty (X1) ±(15 mV + 1% of trigger level)
AUTO trigger level Trigger level is automatically set to 50% point of input
signal (10% and 90% for rise/fall time)
Auto Hysteresis
Time Min hysteresis window (hysteresis compensation)
Frequency One-third of input signal amplitude
Analog LP Filter Nominal 100 kHz, RC type
Digital LP Filter 1Hzto50MHzcutofffrequency
Max Voltage without Damage
1MΩ350 V (DC + AC peak) to 440 Hz, falling to 12 VRMS (X1)
at 1 MHz
50 Ω12 VRMS
Connector BNC
Input C – 3 GHz (FCA3003 and FCA3103 Products)
Characteristic Description
Operating Input Voltage Range
100to300MHz 20mV
RMS to 12 VRMS
0.3to2.5GHz 10 mVRMS to 12 VRMS
2.5to2.7GHz 20 mVRMS to 12 VRMS
2.7to3.0GHz 40 mVRMS to 12 VRMS
Prescaler Factor 16
Impedance 50 Ωnominal, VSWR < 2.5:1
Max Voltage without
Damage
12 VRMS, pin-diode protected
Connector Type-N Female
www.tektronix.com 5
Data Sheet
Input C – 20 GHz (FCA3020 and FCA3120 Products)
Characteristic Description
Frequency Range 0.25 to 20 GHz
Operating Input Voltage Range
250to500MHz –21to+27dBm
0.5to14GHz –27 to +27 dBm
14 to 18 GHz –27 to +27 dBm
18 to 20 GHz –21 to +27 dBm
Prescaler Factor 128
Impedance 50 Ωnominal, VSWR < 2.0:1
AM Tolerance >90% within sensitivity range
Max Voltage without
Damage
+27 dBm
Connector Type Precision-N Female
Rear Panel Inputs and Outputs
Characteristic Description
Reference Input 1, 5, or 10 MHz; 0.1 to 5 VRMS sine; impedance ≥1kΩ
Reference Output 10 MHz; >1 VRMS sine into 50 Ω
Arming Input Arming of all measuring functions
Impedance Approx. 1 kΩ
Frequency range DC to 80 MHz
Pulse Output
(FCA3100 Series)
Programmable through front GPIB/USB
Mode Pulse Out, Gate Open, Alarm Out
Period 20 ns - 2 s, in 10 ns increments
Pulse width 10 ns - 2 s, in 10 ns increments
Output TTL levels in 50 Ω,risetime2ns
Rear-panel
Measurement Inputs
A, B, C (Option RP only)
Impedance 1MΩ/50pFor50Ω(VSWR ≤2:1)
Connectors SMA female for rear input C
BNC for all other inputs/outputs
Auxiliary Functions
Trigger Holdoff
Characteristic Description
TimeDelayRange 20nsto2s,10nsresolution
External Start and Stop Arming
Characteristic Description
Modes Start, Stop, Start and Stop Arming
Input Channels A, B, or (rear panel) E
Max Rep. Rate for Arming Signal
Channel A, B 160 MHz
Channel E 80 MHz
Start-time Delay Range 20 ns to 2 s, 10 ns resolution
Statistics
Characteristic Description
Functions Maximum, Minimum, Mean, ΔMax-Min, Standard
Deviation, and Allan Deviation
Display Numeric, histograms, or trend plots
Sample Size 2to2×10
9samples
Limit Qualifier Off, or capture values above, below, inside, or outside
limits
Measurement Pacing Pacing Time Range: 4 µs to 500 s
Mathematics
Characteristic Description
Functions (K*X+L)/M and (K/X+L)/M. X is current reading and K, L,
and M are constants; set using the keyboard or as frozen
reference value (X0)
Other Functions
Characteristic Description
Measuring Time 20 ns to 1000 s for frequency, burst, and period average.
Single cycle for other measuring functions
Time-base Reference Internal, external, or automatic
Display Hold Freezes the result, until a new measurement is initiated
through a restart
Limit Alarm Graphical indication on front panel and/or SRQ through
GPIB, plus pulse output connector (FCA3100 Series)
Limit Values Lower limit, upper limit
Settings Off, or alarm if value is above, below, inside, or outside
limits
On Alarm Stop or Continue
Display Numeric + Graphic
Stored Instrument
Setups
20. Instrument setups can be saved/recalled from
internal nonvolatile memory. 10 can be user protected
Display Backlit LCD graphics screen for menu control, numerical
readout, and status information
Number of digits 14 digits in Numerical mode
Resolution 320 × 97 pixels
GPIB Interface
Characteristic Description
Compatibility IEEE 488.2-1987, SCPI 199953131A Compatibility
mode
Interface Functions SH1, AH1, T6, L4, SR1, RL1, DC1, DT1, E2
Max Measurement Rate
GPIB 15k/5k readings/s (Block mode)
4k/- readings/s (Talker Only mode)
650/500 readings/s (individual GET triggered)
To internal memory 250k readings/s
Internal Memory Size 750k readings (FCA3000 Series)
3.75M readings (FCA3100 Series)
USB Interface
Characteristic Description
USB Version 2.0 full speed (11 Mb/s)
Calibration
Characteristic Description
Mode Closed case, menu controlled
Calibration Frequencies 0.1, 1, 5, 10, 1.544, and 2.048 MHz
6www.tektronix.com
Timer/Counter/Analyzers — Tektronix FCA3000 and FCA3100 Series
General Specifications
EnvironmentalData
Characteristic Description
Class MIL-PRF-28800F, Class 3
Operating Temp 0 °C to +50 °C
Storage Temp –40 °C to +71 °C
Humidity 5-95% (10-30 °C)
5-75% (30-40 °C)
5-45% (40-50 °C)
Altitude Operating: 2,000 m
Storage: 12,000 m
Safety Directive 2006/95/EC, EN61010-1, UL61010-1,
CAN/CSA C22.2 No. 61010-1
EMC EU Directive 2004/108/EC, EN61326-1, EN61326-2-1,
Class A
Power Requirements
Characteristic Description
Basic Version 90 to 265 VRMS,45to440Hz,<40W
Time-base Options
Characteristic Standard Medium
Stability (MS)
High Stability
(HS)
Time-base Type TCXO OCXO OCXO
Uncertainty Due to –
Aging
Per 24h NA <5×10–9*1<5×10–10*1
Per month <5×10–7 <6×10–8 <1×10–8
Per year <5×10–6 <2×10–7 <5×10–8
Temperature variation (typ. values)
0-50 °C <1×10–5 <5×10–8 <5×10–9
20-26 °C <3×10–6 <2×10–8 <1×10–9
Short-term
Stability: t = 1 s
Not specified <1×10–10 <1×10–11
Root Allan
Variance: t = 10 s
Not specified <1×10–10 <1×10–11
Power-on Stability NA <1×10–7 <1×10–8
Deviation versus
final value after
24h ON time,
after a warm-up
time of:
30 min 30 min 10 min
Total Uncertainty, for Operating Temperature 20 °C to 26 °C, at 2σ(95%)
Confidence Interval
1yearafter
calibration
<7×10–6 <2.4×10–7 <0.6×10–7
2 years after
calibration
<1.2×10–5 <4.6×10–7 <1.2×10–7
*1After 1 month of continuous operation.
Physical
Dimension mm in.
Height 90 3.6
Width 210 8.25
Depth 395 15.6
Weight kg lb.
Net 2.7 5.8
Shipping 3.5 7.5
Ordering Information
Models
Model Description
FCA3000 Timer/Counter/Analyzer 300 MHz / 100 ps
FCA3003 Timer/Counter/Analyzer 3 GHz / 100 ps
FCA3020 Timer/Counter/Analyzer 20 GHz / 100 ps
FCA3100 Timer/Counter/Analyzer 300 MHz / 50 ps
FCA3103 Timer/Counter/Analyzer 3 GHz / 50 ps
FCA3120 Timer/Counter/Analyzer 20 GHz / 50 ps
FCA3000/3100 Series Include: Timer/Counter, line cord, calibration certificate,
Quick Start User Manual, CD-ROM with user manual (English, French, German,
Spanish, Simplified Chinese, Traditional Chinese, Korean, Russian, Japanese),
Programmer’s Guide, Technical Specifications, Trial version of TimeView™
Software, and CD-ROM with National Instruments LabVIEW SignalExpress™
Tektronix Edition, Limited Edition Software.
Please specify power plug when ordering.
Instrument Options
Option Description
MS Medium-stability Oven Time Base
HS High-stability Oven Time Base
RP Rear-panel Connectors
Power Plug Options
Option Description
A0 North America
A1 Universal Euro
A2 United Kingdom
A3 Australia
A5 Switzerland
A6 Japan
A10 China
A11 India
E1 UK and Euro (FCA3000 and FCA3100 only)
www.tektronix.com 7
Data Sheet Contact Tektronix:
ASEAN / Australasia (65) 6356 3900
Austria 00800 2255 4835*
Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777
Belgium 00800 2255 4835*
Brazil +55(11)37597600
Canada 1 800 833 9200
Central East Europe, Ukraine, and the Baltics +41 52 675 3777
Central Europe & Greece +41 52 675 3777
Denmark +4580881401
Finland +41526
75 3777
France 00800 2255 4835*
Germany 00800 2255 4835*
Hong Kong 400 820 5835
India 000 800 650 1835
Italy 00800 2255 4835*
Japan 81 (3) 6714 3010
Luxembourg +41526753777
Mexico, Central/South America & Caribbean (52) 56 04 50 90
Middle East, Asia, and North Africa +41 52 675 3777
The Netherlands 00800 2255 4835*
Norway 800 16098
People’s Republic of China 400 820 5835
Poland +41 52 675 3777
Portugal 80 08 12370
Republic of Korea 001 800 8255 2835
Russia & CIS +7 (495) 7484900
South Africa +41526753777
Spain 00800 2255 4835*
Sweden 00800 2255 4835*
Switzerland 00800 2255 4835*
Taiwan 886 (2) 2722 9622
United Kingdom & Ireland 00800 2255 4835*
USA 1 800 833 9200
* European toll-free number. If not accessible, call: +41 52 675 3777
Updated 25 May 2010
For Further Information. Tektronix maintains a comprehensive, constantly expanding
collection of application notes, technical briefs and other resources to help engineers working
on the cutting edge of technology. Please visit www.tektronix.com
Copyright © Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents,
issued and pending. Information in this publication supersedes that in all previously published material.
Specification and price change privileges reserved. TEKTRONIX and TEK are registered trademarks of
Tektroni x, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks
of their respective companies.
20 Jul 2010 3CW-25556-0
Service Options
Option Description
CA1 Provides a single calibration event or coverage for the
designated calibration interval, whichever comes first
C3 Calibration Service3Years
C5 Calibration Service5Years
D1 Calibration Data Report
R5 Repair Service 5 Years
Recommended Accessories and Software
Accessory Description
HCTEK4321 Hard Carrying Case
AC4000 Soft Carrying Case
174-4401-xx USB Host to Device Cable, 3 ft.
012-0991-xx GPIB Cable, Double Shielded
012-1256-xx BNC Male to BNC Male, Cable Shielded, 9 ft., 50 Ω
012-0482-xx BNC Male to BNC Male, Cable Shielded, 3 ft., 50 Ω
SIGEXPTE National Instruments SignalExpress™ Tektronix Edition
Interactive Measurement Software – Professional
Version
TVA3000 TimeView™ Modulation Domain Analysis Software
Product(s) are manufactured in ISO registered facilities.
Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with Tektronix
Standard Codes and Formats.
www.tektronix.com
